Evaluation of porosity and thickness on effective diffusivity in gas diffusion layer
Source abstract
Abstract
Abstract Porosity and thickness are two key properties of GDL and both affect the transport properties of porous media. This paper focuses on the influence of the GDL microstructure on its transport properties, which will be analyzed from different samples. The results show that thickness affects permeability through the principal flow direction more than through non-principal directions, thus it is necessary to increase the anisotropic characteristics of the material. Moreover, it is ascertained that permeability is more affected by the number of fibers than by the thickness. For the variable porosity sample groups, the simulation results are coincident with the fractal model in principal and non-principal flow directions, and water saturation inside the GDL samples has been evaluated. They are shown several cases of the GDL model to illustrate the fluid flow along through-plane and in-plane directions as well as the conditions at inlet and outlet boundaries. These results have a strong potential to gain deeper understanding of the microscopic flow phenomenon within the porous structures and to determine the influence the microstructure has on the macroscopic transport properties, thus leading to notable improvements of fuel cell performance.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Fuel Cells and Related Materials · Nanopore and Nanochannel Transport Studies · Lattice Boltzmann Simulation Studies
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (45)
Show source-provided references
1. Fundamental models for fuel cell engineering10.1021/cr020718s ↗
2. Effective transport properties for polymer electrolyte membrane fuel cells-with a focus on the gas diffusion layer10.1016/j.pecs.2012.07.002 ↗
3. On mechanisms and models of multi-component gas diffusion in porous structures of fuel cell electrodes10.1016/j.ijheatmasstransfer.2013.10.032 ↗
4. Effect of electrochemical aging on the interaction between gas diffsion layers and the flow field in a proton exchange membrane fuel cell10.1016/j.ijhydene.2011.03.020 ↗
5. Study on hydrophilicity degradation of gas diffusion layer in proton exchange membrane fuel cells10.1016/j.enconman.2013.07.034 ↗
6. Degradation of gas diffusion layers through repetitive freezing10.1016/j.apenergy.2011.07.011 ↗
7. Experimental characterization of in-plane permeability of gas diffusion layers10.1016/j.jpowsour.2006.07.058 ↗
8. In-plane and through-plane gas permeability of carbon fiber electrode backing layers10.1016/j.jpowsour.2006.06.096 ↗
9. Electrochemical durability of gas diffusion layer under simulated proton exchange membrane fuel cell conditions10.1016/j.ijhydene.2009.07.085 ↗
10. Effect of weave tightness and structure on the in-plane and through-plane air permeability of woven carbon fibers for gas diffsion layers10.1016/j.jpowsour.2010.07.057 ↗
11. Lattice Boltzmann model for simulating flows with multiple phases and components10.1103/PhysRevE.47.1815 ↗
12. Application of lattice Boltzmann method to a micro-scale flow simulation in the porous electrode of a PEM fuel cell10.1016/j.jpowsour.2007.04.021 ↗
13. Evaluation of three lattice Boltzmann models for multiphase flows in porous media10.1016/j.camwa.2010.06.034 ↗
14. Review on the properties of nano-/micro structure s in the catalyst layer of PEMFC
15. Water transport in polymer electrolyte membrane fuel cells10.1016/j.pecs.2010.06.002 ↗
16. Multi-phase micro-scale flow simulation in the electrodes of a PEM fuel cell by lattice Boltzmann method10.1016/j.jpowsour.2007.12.008 ↗
17. Lattice Boltzmann simulation of liquid droplet dynamic behaviour on a hydrophobic surface of a gas flow channel10.1016/j.jpowsour.2009.01.029 ↗
18. Capillary pressures in carbon paper gas diffusion layers having hydrophilic and hydrophobic pores10.1016/j.ijheatmasstransfer.2011.08.049 ↗
19. Modeling fluid flow in the gas diffusion layers in PEMFC using the multiple relaxation-time lattice boltzmann method10.1002/fuce.201000074 ↗
20. An improved MRT lattice Boltzmann Model for modeling fluid flow in gas diffusion layer in PEM fuel cell permeability calculation of carbon paper and carbon cloth porous media
21. Design of acoustic trim based on geometric modeling and flow simulation for non-woven10.1016/j.commatsci.2006.01.018 ↗
22. Modeling of two-phase behavior in the gas diffusion medium of PEFCs via full morphology approach10.1149/1.2472547 ↗
23. Lattice Boltzmann simulations of anisotropic permeabilities in carbon paper gas diffusion layers10.1016/j.jpowsour.2008.09.086 ↗
24. Stochastic reconstruction and a scaling method to determine effective transport coefficients of a proton exchange membrane fuel cell catalyst layer10.1016/j.jpowsour.2010.08.033 ↗
25. Overview of the lattice Boltzmann method for nano- and microscale fluid dynamics in materials science and engineering10.1088/0965-0393/12/6/R01 ↗
26. Two relaxation time lattice equation for high knudsen number flows using wall function approach
27. Equilibrium-type and link type lattice Boltzmann models for generic advection and anisotropic-dispersion equation10.1016/j.advwatres.2005.03.004 ↗
28. Lattice Boltzmann simulation of water and gas flow in porous gas diffusion layers in fuel cells reconstructed from micro-tomography10.1016/j.camwa.2012.08.006 ↗
29. On boundary conditions in lattice Boltzmann methods10.1063/1.869035 ↗
30. Effects of the electrical resistances of the GDL in PEM fuel cell10.1016/j.jpowsour.2006.04.106 ↗
31. A model for strain-induced permeability anisotropy in deformable granular media10.1139/t02-088 ↗
32. Kaviany · 1999
33. Determination of material properties of gas diffusion layers: experiments and simulations using phase contrast tomographic microscopy10.1149/1.3176876 ↗
34. Viscous permeability of random fiber structures: comparison of electrical and diffusional estimates with experimental and analytical results10.1177/0021998305046438 ↗
35. Determination of the effective gas diffusivity of a porous composite medium from the three-dimensional reconstruction of its microstructure10.1103/PhysRevE.83.026310 ↗
36. multi-component gas transport in micro-porous domains: multidimensional simulation at the macroscale10.1016/j.ijheatmasstransfer.2011.09.049 ↗
37. Tortuous flow in porous media10.1103/PhysRevE.54.406 ↗
38. Simulations of single-fluid flow in porous media10.1142/S0129183198001369 ↗
39. Simulating permeability of 3D calendered fibrous structures
40. Studies on fibrous aerosol filisters, ii. pressure drops in systems of parallel cylinders
41. Transverse permeability of fibrous porous media
42. Anisotropic, effective diffusivity of porous gas diffusion layer materials for PEFC10.1016/j.electacta.2008.07.034 ↗
43. Effect of fiber architecture on permeability in liquid composite molding10.1002/pc.10136 ↗
44. Effective diffusivity in partially-saturated carbon-fiber gas diffsion layers: effect of through-plane saturation distribution10.1016/j.ijheatmasstransfer.2015.02.073 ↗
45. Three-Dimensional lattice Boltzmann simulation of liquid water transport in porous layer of PEMFC10.3390/e18010017 ↗