Optimization of a new flow design for solid oxide cells using computational fluid dynamics modelling
Source abstract
Abstract
Abstract Design of a gas distributor to distribute gas flow into parallel channels for Solid Oxide Cells (SOC) is optimized, with respect to flow distribution, using Computational Fluid Dynamics (CFD) modelling. The CFD model is based on a 3d geometric model and the optimized structural parameters include the width of the channels in the gas distributor and the area in front of the parallel channels. The flow of the optimized design is found to have a flow uniformity index value of 0.978. The effects of deviations from the assumptions used in the modelling (isothermal and non-reacting flow) are evaluated and it is found that a temperature gradient along the parallel channels does not affect the flow uniformity, whereas a temperature difference between the channels does. The impact of the flow distribution on the maximum obtainable conversion during operation is also investigated and the obtainable overall conversion is found to be directly proportional to the flow uniformity. Finally the effect of manufacturing errors is investigated. The design is shown to be robust towards deviations from design dimensions of at least ±0.1 mm which is well within obtainable tolerances.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advancements in Solid Oxide Fuel Cells · Catalytic Processes in Materials Science · Catalysis and Oxidation Reactions
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (64)
Show source-provided references
1. Fuel processing for fuel cells and power to fuels as seen from an industrial perspective10.1016/j.jcat.2015.04.014 ↗
2. The impact of flow distributors on the performance of planar solid oxide fuel cell10.1016/j.jpowsour.2010.04.073 ↗
3. Carbon deposition in solid oxide cells during Co-Electrolysis of H2O and CO210.1149/2.079403jes ↗
4. Kendall · 2003 · 197
5. Fuel cells – solid oxide fuel cells | gas distribution
6. System designs and applications
7. Three-dimensional numerical study on cell performance and transport phenomena of PEM fuel cells with conventional flow fields10.1016/j.ijhydene.2007.09.005 ↗
8. Flow distribution in U-type layers or stacks of planar fuel cells10.1016/j.jpowsour.2007.12.003 ↗
9. Three-dimensional numerical analysis of proton exchange membrane fuel cells (PEMFCs) with conventional and interdigitated flow fields10.1016/j.jpowsour.2004.05.010 ↗
10. Numerical analysis of effects of flow channel size on reactant transport in a proton exchange membrane fuel cell stack10.1016/j.jpowsour.2009.04.075 ↗
11. Prediction of anode performances of direct methanol fuel cells with different flow-field design using computational simulation10.1016/j.jpowsour.2006.02.023 ↗
12. Discrete geometry optimization for reducing flow non-uniformity, asymmetry, and parasitic minor loss pressure drops in Z-type configurations of fuel cells10.1016/j.jpowsour.2014.06.136 ↗
13. Effects of operations and structural parameters on the one-cell stack performance of planar solid oxide fuel cell10.1016/j.jpowsour.2009.06.009 ↗
14. Flow distribution analyzing for the solid oxide fuel cell short stacks with rectangular and discrete cylindrical rib configurations10.1016/j.ijhydene.2014.10.125 ↗
15. Investigating on the flow distribution of a planar solid oxide fuel cell stack10.4028/www.scientific.net/AMR.986-987.97 ↗
16. A key geometric parameter for the flow uniformity in planar solid oxide fuel cell stacks10.1016/j.ijhydene.2009.02.071 ↗
17. Silver wire seal design for planar solid oxide fuel cell stack10.1016/j.jpowsour.2004.05.038 ↗
18. J.A. Salvatore, V. Rajamani, A. Dutta, EP2377190 (B1) Unif. Gas Distribution through Channels of SOFC, 2012. http://worldwide.espacenet.com/publicationDetails/description?CC=EP&NR=2377190B1&KC=B1&FT=D&ND=4&date=20140806&DB=worldwide.espacenet.com&locale=en_EP (accessed November 26, 2015).
19. Analysis and optimization of flow distribution in parallel-channel configurations for proton exchange membrane fuel cells10.1016/j.jpowsour.2009.05.033 ↗
20. Y.-P. Chyou, Y.-N. Cheng, K.-F. Lin, US 20070207363 A1 Interconnect set of planar solid oxide fuel cell having flow paths, 2007. https://www.google.com/patents/US20070207363 (accessed November 27, 2015).
21. On flow uniformity in various interconnects and its influence to cell performance of planar SOFC10.1016/j.jpowsour.2008.04.059 ↗
22. T. Heiredal-Clausen, C. Buchholtz Frederiksen, Gas Inlet for SOEC Unit, (2014). https://patentscope.wipo.int/search/en/detail.jsf?docId=WO2014177212&recNum=1&maxRec=&office=&prevFilter=&sortOption=&queryString=&tab=PCT+Biblio (accessed July 13, 2015).
23. Performance studies of PEM fuel cells with interdigitated flow fields10.1016/j.jpowsour.2004.03.055 ↗
24. Yan · 2006 · vol. 160 · 116
25. Pressure drop and flow distribution in multiple parallel-channel configurations used in proton-exchange membrane fuel cell stacks10.1016/j.jpowsour.2005.07.064 ↗
26. Network based optimization model for pin-type flow field of polymer electrolyte membrane fuel cell10.1016/j.ijhydene.2013.03.066 ↗
27. Review of bipolar plates in PEM fuel cells: flow-field designs10.1016/j.ijhydene.2004.09.019 ↗
28. Bipolar plates for PEM fuel cells: a review10.1016/j.ijhydene.2005.04.016 ↗
29. Metal bipolar plates for PEM fuel cell-A review10.1016/j.jpowsour.2006.09.088 ↗
30. Theory and practice of flow field designs for fuel cell scaling-up: a critical review10.1016/j.apenergy.2015.01.032 ↗
31. Pressure drop and flow distribution in parallel-channel configurations of fuel cells: U-type arrangement10.1016/j.ijhydene.2008.08.020 ↗
32. Flow distribution and pressure drop in parallel-channel configurations of planar fuel cells10.1016/j.jpowsour.2004.12.018 ↗
33. Flow-field designs of bipolar plates in PEM fuel cells: theory and applications10.1002/fuce.201200074 ↗
34. Nature inspired flow field designs for proton exchange membrane fuel cell10.1016/j.ijhydene.2012.12.149 ↗
35. Flow distribution in the manifold of PEM fuel cell stack10.1016/j.jpowsour.2007.05.007 ↗
36. Water and thermal management for Ballard PEM fuel cell stack10.1016/j.jpowsour.2005.01.030 ↗
37. Water and thermal management in a single PEM fuel cell with non-uniform stack temperature10.1016/j.jpowsour.2006.02.107 ↗
38. Challenges and opportunities of thermal management issues related to fuel cell technology and modeling10.1016/j.ijheatmasstransfer.2005.04.014 ↗
39. Flow uniformity optimization for large size planar solid oxide fuel cells with U-type parallel channel designs10.1016/j.jpowsour.2009.11.127 ↗
40. Pressure and flow distribution in internal gas manifolds of a fuel-cell stack10.1016/S0378-7753(02)00615-8 ↗
41. Situ raman studies of carbon removal from high temperature Ni–YSZ cermet anodes by gas phase reforming agents10.1021/jp408192e ↗
42. Carbon deposition on Ni/YSZ anodes exposed to CO/H2 feeds10.1016/j.jpowsour.2009.09.014 ↗
43. A review of RedOx cycling of solid oxide fuel cells anode
44. Fluid distribution in process equipment10.1021/ie50570a031 ↗
45. Operational and structural nonidealities in modeling and design of multitubular catalytic reactors10.1021/ie960596s ↗
46. Catalytic Fixed-bed Reactors10.1002/14356007.b04_199.pub2 ↗
47. Emonts · 2005
48. Three-dimensional thermo-fluid electrochemical modeling of planar SOFC stacks10.1016/S0378-7753(02)00487-1 ↗
49. Integrated thermal engineering analyses with heat transfer at periphery of planar solid oxide fuel cell10.1016/j.jpowsour.2004.07.001 ↗
50. Progress in high-temperature electrolysis for hydrogen production using planar SOFC technology10.1016/j.ijhydene.2006.06.061 ↗
51. Thermal stress analysis of a planar SOFC stack10.1016/j.jpowsour.2006.10.089 ↗
52. 3D transient thermomechanical behaviour of a full scale SOFC short stack10.1016/j.ijhydene.2013.01.072 ↗
53. Thermal and electrochemical three dimensional CFD model of a planar solid oxide electrolysis cell
54. Parametric study of solid oxide steam electrolyzer for hydrogen production10.1016/j.ijhydene.2007.03.001 ↗
55. Polarization effects in electrolyte/electrode-supported solid oxide fuel cells10.1023/A:1015593326549 ↗
56. Radiation heat transfer in SOFC materials and components10.1016/j.jpowsour.2004.11.063 ↗
57. Development and validation of a computationally efficient pseudo 3D model for planar SOFC integrated with a heating furnace10.1016/j.cej.2016.01.040 ↗
58. Studies on high-temperature multilayer thermal insulations10.1016/j.ijheatmasstransfer.2003.08.012 ↗
59. Theoretical studies of high-temperature multilayer thermal insulations using radiation scaling10.1016/S0022-4073(03)00264-4 ↗
60. Computational fluid dynamics modeling of a solid oxide electrolyzer cell for hydrogen production10.1016/j.ijhydene.2009.07.080 ↗
61. Modeling of a solid oxide electrolysis cell for carbon dioxide electrolysis10.1016/j.cej.2010.08.032 ↗
62. Method for in situ carbon deposition measurement for solid oxide fuel cells10.1016/j.jpowsour.2013.07.106 ↗
63. A high fuel utilizing solid oxide fuel cell cycle with regard to the formation of nickel oxide and power density10.1016/j.jpowsour.2006.08.037 ↗
64. Equilibria of decomposition reactions of carbon monoxide and methane over nickel catalysts10.1016/0021-9517(72)90170-4 ↗