A method for the fast estimation of a battery entropy-variation high-resolution curve – Application on a commercial LiFePO4/graphite cell
Source abstract
Abstract
Abstract The entropy-variation of a battery is responsible for heat generation or consumption during operation and its prior measurement is mandatory for developing a thermal model. It is generally done through the potentiometric method which is considered as a reference. However, it requires several days or weeks to get a look-up table with a 5 or 10% SoC (State of Charge) resolution. In this study, a calorimetric method based on the inversion of a thermal model is proposed for the fast estimation of a nearly continuous curve of entropy-variation. This is achieved by separating the heats produced while charging and discharging the battery. The entropy-variation is then deduced from the extracted entropic heat. The proposed method is validated by comparing the results obtained with several current rates to measurements made with the potentiometric method.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advanced Battery Technologies Research · Fuel Cells and Related Materials · Advanced Battery Materials and Technologies
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (25)
Show source-provided references
1. Prada · 2013
2. Analysis for EV and PHEV batteries and drive cycles10.1149/2.1161412jes ↗
3. Sensitivity analysis of an electrochemical model of Li-ion batteries and consequences on the modeled aging mechanisms10.1149/06609.0037ecst ↗
4. A control-oriented lithium-ion battery pack model for plug-in hybrid electric vehicle cycle-life studies and system design with consideration of health management10.1016/j.jpowsour.2014.12.048 ↗
5. Aging formula for lithium ion batteries with solid electrolyte interphase layer growth10.1016/j.jpowsour.2015.06.014 ↗
6. Solid-state thermal management for lithium-ion EV batteries10.1109/TVT.2012.2214246 ↗
7. Thermal modeling and design considerations of lithium-ion batteries10.1016/S0378-7753(99)00178-0 ↗
8. Thermal modeling of a cylindrical LiFePO4/graphite lithium-ion battery10.1016/j.jpowsour.2009.10.105 ↗
9. A lumped-parameter electro-thermal model for cylindrical batteries10.1016/j.jpowsour.2014.01.097 ↗
10. Lin · 2009 · 1643
11. Development of a thermal simulation and testing model for a superior lithium-ion-polymer battery
12. Three-dimensional thermal model of a lithium ion battery for hybrid mobile working machines: determination of the model parameters in a pouch cell10.1109/TEC.2013.2255291 ↗
13. Associates · 1999
14. Multiphysical lithium-based battery model for use in state-of-charge determination10.1109/TVT.2012.2205169 ↗
15. Thermal Impedance Spectroscopy - a method for the thermal characterization of high power battery cells10.1016/j.jpowsour.2012.07.144 ↗
16. Measurements of heat generation in prismatic Li-ion batteries10.1016/j.jpowsour.2014.03.037 ↗
17. An improved theoretical electrochemical-thermal modelling of lithium-ion battery packs in electric vehicles10.1016/j.jpowsour.2015.03.022 ↗
18. Heats of mixing and of entropy in porous insertion electrodes10.1016/S0378-7753(03)00283-0 ↗
19. Modeling of the diffusion phenomenon in a lithium-ion cell using frequency or time domain identification10.1016/j.microrel.2013.03.009 ↗
20. Illig · 2014
21. Thermal modeling of large prismatic LiFePO4/graphite battery. Coupled thermal and heat generation models for characterization and simulation10.1016/j.jpowsour.2015.02.091 ↗
22. Thermodynamics of lithium intercalation into graphites and disordered carbons10.1149/1.1646152 ↗
23. Effects of entropy changes in anodes and cathodes on the thermal behavior of lithium ion batteries10.1016/j.jpowsour.2008.10.078 ↗
24. Effect of entropy change of lithium intercalation in cathodes and anodes on Li-ion battery thermal management10.1016/j.jpowsour.2009.11.103 ↗
25. A novel and precise measuring method for the entropy of lithium-ion cells: ΔS via electrothermal impedance spectroscopy10.1016/j.electacta.2014.05.153 ↗