Effects of operating conditions on performance of high-temperature polymer electrolyte water electrolyzer
Source abstract
Abstract
Abstract Effects of operating conditions of a high-temperature polymer electrolyte water electrolyzer (HT-PEWE) on the electrolysis voltage are evaluated, and the optimal conditions for a high performance are revealed. A HT-PEWE unit cell with a 4-cm 2 electrode consisting of Nafion117-based catalyst-coated membrane with IrO 2 and Pt/C as the oxygen and hydrogen evolution catalysts is fabricated, and its electrolysis voltage and high-frequency resistance are assessed. The cell temperature and pressure are controlled at 80–130 °C and 0.1–0.5 MPa, respectively. It is observed that increasing the temperature at a constant pressure of 0.1 MPa does not increase the ohmic overvoltage of the cell; however, it does increase the concentration overvoltage. It is also found that the increase in the overvoltage resulting from the rise in the temperature can be suppressed by elevating the pressure. When operating the cell at a temperature of 100 °C, pressure greater than 0.1 MPa suppresses the overvoltage, and so does pressures greater than 0.3 MPa at 130 °C. This behavior suggests that keeping the water in a liquid water phase by increasing the pressure is critical for operating PEWEs at high temperatures.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Fuel Cells and Related Materials · Hybrid Renewable Energy Systems · Advanced Battery Technologies Research
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (31)
Show source-provided references
1. Campbell · 2002
2. The end of cheap oil10.1038/scientificamerican0398-78 ↗
3. The world petroleum life cycle
4. PEM electrolysis for production of hydrogen from renewable energy sources10.1016/j.solener.2004.09.003 ↗
5. High temperature operation of a composite membrane-based solid polymer electrolyte water electrolyser10.1016/j.electacta.2008.04.009 ↗
6. Membrane electrode assemblies with low noble metal loadings for hydrogen production from solid polymer electrolyte water electrolysis10.1016/j.ijhydene.2013.05.099 ↗
7. Electrochemical behavior of novel Ti/IrOx-Sb2O5-SnO2 anodes10.1021/jp013547o ↗
8. Membrane electrode assemblies for unitized regenerative polymer electrolyte fuel cells10.1016/j.jpowsour.2005.02.068 ↗
9. Experimental study on porous current collectors of PEM electrolyzers10.1016/j.ijhydene.2012.01.095 ↗
10. Influence of properties of gas diffusion layers on the performance of polymer electrolyte-based unitized reversible fuel cells10.1016/j.ijhydene.2010.10.091 ↗
11. Influence of PTFE coating on gas diffusion backing for unitized regenerative polymer electrolyte fuel cells10.1016/S0378-7753(03)00795-X ↗
12. Optimization of porous current collectors for PEM water electrolysers10.1016/j.ijhydene.2008.11.056 ↗
13. Effect of titanium powder loading in gas diffusion layer of a polymer electrolyte unitized reversible fuel cell10.1016/j.jpowsour.2011.11.041 ↗
14. Dissolution of hydrogen and the ratio of the dissolved hydrogen content to the produced hydrogen in electrolyzed water using SPE water electrolyzer10.1016/S0013-4686(03)00541-3 ↗
15. Numerical modeling of three- dimensional two-phase gas-liquid flow in the flow field plate of a PEM electrolysis cell10.1016/j.ijhydene.2010.01.050 ↗
16. Effect of flow regime of circulating water on a proton exchange membrane electrolyzer10.1016/j.ijhydene.2010.06.103 ↗
17. Membrane electrode assemblies with low noble metal loadings for hydrogen production from solid polymer electrolyte water electrolysis10.1016/j.ijhydene.2013.05.099 ↗
18. Study of catalyst sprayed membrane under irradiation method to prepare high performance membrane electrode assemblies for solid polymer electrolyte water electrolysis10.1016/j.ijhydene.2011.08.057 ↗
19. Performance investigation of membrane electrode assemblies for hydrogen production by solid polymer electrolyte water electrolysis10.1016/S1452-3981(23)19533-2 ↗
20. A novel catalyst layer with hydrophilic-hydrophobic meshwork and pore structure for solid polymer electrolyte water electrolysis10.1016/j.elecom.2011.02.014 ↗
21. Nanosized IrO2 electrocatalysts for oxygen evolution reaction in an SPE electrolyzer10.1007/s11051-010-9917-2 ↗
22. Study of carbon-supported IrO2 and RuO2 for use in the hydrogen evolution reaction in a solid polymer electrolyte electrolyzer10.1016/j.electacta.2009.10.081 ↗
23. Antimony doped tin oxides and their composites with tin pyrophosphates as catalyst supports for oxygen evolution reaction in proton exchange membrane water electrolysis10.1016/j.ijhydene.2012.09.156 ↗
24. High temperature PEM fuel cells10.1016/j.jpowsour.2006.05.034 ↗
25. Temperature and pressure dependence of O2 reduction at Pt ∣ Nafion® 117 and Pt ∣ BAM® 407 interfaces10.1016/S0022-0728(99)00164-3 ↗
26. Polymer membranes for high temperature proton exchange membrane fuel cell: recent advances and challenges10.1016/j.progpolymsci.2011.01.003 ↗
27. Solid polymer electrolyte water electrolyser based on Nafion-TiO2 composite membrane for high temperature operation10.1002/fuce.200800063 ↗
28. Performance of a high temperature polymer electrolyte membrane water electrolyser10.1016/j.jpowsour.2011.04.062 ↗
29. Polymer electrolyte fuel cell model10.1149/1.2085971 ↗
30. Gas ± liquid two-phase flow in micro channels part I: two-phase flow patterns10.1016/S0301-9322(98)00054-8 ↗
31. A comparative study of water uptake by and transport through ionomeric fuel cell membranes10.1149/1.2220749 ↗