journal article·2010-06-01

High-performance PrBaCo2O5+δ–Ce0.8Sm0.2O1.9 composite cathodes for intermediate temperature solid oxide fuel cell

Chengjun Zhu, Xiaomei Liu, Cuishan Yi, Li Pei, Dejun Wang, Duanting Yan, Keguang Yao, Tianquan Lü, Wenhui Su

Journal of Power Sources· Volume 195· Issue 11
Publisher page

Abstract

Abstract PrBaCo2O5+δ–Ce0.8Sm0.2O1.9 (PBCO–SDC) composite material are prepared and characterized as cathode for intermediate temperature solid oxide fuel cells (IT-SOFCs). The powder X-ray diffraction result proves that there are no obvious reaction between the PBCO and SDC after calcination at 1100 °C for 3 h. AC impedance spectra based on SDC electrolyte measured at intermediate temperatures shows that the addition of SDC to PBCO improved remarkably the electrochemical performance of a PBCO cathode, and that a PBCO–30SDC cathode exhibits the best electrochemical performance in the PBCO–xSDC system. The total interfacial resistances Rp is the smallest when the content of SDC is 30 wt%, where the value is 0.035 Ω cm2 at 750 °C, 0.072 Ω cm2 at 700 °C, and 0.148 Ω cm2 at 650 °C, much lower than the corresponding interfacial resistance for pure PBCO. The maximum power density of an anode-supported single cell with PBCO–30SDC cathode, Ni–SDC anode, and dense thin SDC/LSGM (La0.9Sr0.1Ga0.8Mg0.2O3−δ)/SDC tri-layer electrolyte are 364, 521 and 741 mW cm−2 at 700, 750 and 800 °C, respectively.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Advancements in Solid Oxide Fuel Cells · Electronic and Structural Properties of Oxides · Magnetic and transport properties of perovskites and related materials

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References

Reference metadata was not supplied for this record.