journal article·2008-03

A novel electrochemical process to prepare a high-porosity manganese oxide electrode with promising pseudocapacitive performance

Jeng-Kuei Chang, Shih-Hsun Hsu, Wen-Ta Tsai, I-Wen Sun

Journal of Power Sources· Volume 177· Issue 2
Publisher page

Abstract

Abstract A nanoporous nickel (Ni) substrate was successfully prepared by selective dissolution of copper (Cu) from a Ni–Cu alloy layer. It was noted that both the Cu etching and the Ni/Cu codeposition processes could be performed in the same solution. Afterwards, anodic deposition was carried out to disperse fibrous manganese (Mn) oxide onto the nanoporous Ni substrate. As a result, a novel oxide electrode with a high-porosity structure was fabricated by the totally electrochemical procedure, which is very simple and efficient. Pseudocapacitive performance of this oxide electrode was evaluated by cyclic voltammetry in 0.1 M Na 2 SO 4 solution. The data indicated that specific capacitance of the Mn oxide was as high as 502 F g −1 , which was 85% higher than that deposited on a flat electrode. Capacitance retained ratio after 500 charge–discharge cycles of the Mn oxide was also significantly improved from 75 to 93% due to the use of the nanoporous substrate.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Supercapacitor Materials and Fabrication · Advanced battery technologies research · Electrocatalysts for Energy Conversion

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (23)

Show source-provided references
1. Kötz · Electrochim. Acta · 2000 · 45 · 248310.1016/S0013-4686(00)00354-6 ↗
2. Lee · J. Solid State Chem. · 1999 · 144 · 22010.1006/jssc.1998.8128 ↗
3. Pang · J. Electrochem. Soc. · 2000 · 147 · 44410.1149/1.1393216 ↗
4. Toupin · Chem. Mater. · 2004 · 16 · 318410.1021/cm049649j ↗
5. Chang · J. Power Sources · 2007 · 166 · 59010.1016/j.jpowsour.2007.01.036 ↗
6. Lee · Electrochem. Solid State Lett. · 2001 · 4 · A1910.1149/1.1346536 ↗
7. Toupin · Chem. Mater. · 2002 · 14 · 394610.1021/cm020408q ↗
8. Jeong · J. Electrochem. Soc. · 2002 · 149 · A141910.1149/1.1511188 ↗
9. Hu · J. Power Sources · 2003 · 115 · 17910.1016/S0378-7753(02)00647-X ↗
10. Kim · J. Electrochem. Soc. · 2003 · 150 · D5610.1149/1.1541675 ↗
11. Chang · J. Electrochem. Soc. · 2003 · 150 · A133310.1149/1.1605744 ↗
12. Subramanian · J. Phys. Chem. B · 2005 · 109 · 2020710.1021/jp0543330 ↗
13. West · J. Power Sources · 2004 · 126 · 20310.1016/j.jpowsour.2003.08.020 ↗
14. Wang · J. Power Sources · 2005 · 140 · 21110.1016/j.jpowsour.2004.07.033 ↗
15. Xu · J. Solid State Chem. · 2006 · 179 · 135110.1016/j.jssc.2006.01.058 ↗
16. Wu · J. Electrochem. Soc. · 2004 · 151 · A206010.1149/1.1815151 ↗
17. Zhou · J. Solid State Electrochem. · 2004 · 8 · 48210.1007/s10008-003-0468-7 ↗
18. Raymundo-Pinero · J. Electrochem. Soc. · 2005 · 152 · A22910.1149/1.1834913 ↗
19. Lee · J. Electrochem. Soc. · 2005 · 152 · A71610.1149/1.1870793 ↗
20. Sun · Chem. Mater. · 2004 · 16 · 312510.1021/cm0497881 ↗
21. Chang · J. Power Sources · 2004 · 135 · 34410.1016/j.jpowsour.2004.03.076 ↗
22. Zhou · J. Electroanal. Chem. · 1995 · 398 · 510.1016/0022-0728(95)04001-0 ↗
23. Tench · J. Electrochem. Soc. · 1990 · 137 · 306110.1149/1.2086160 ↗