Corrosion of metallic stack components in molten carbonates: Critical issues and recent findings
Source abstract
Abstract
The influence of stainless steel hardware corrosion on molten carbonate fuel cell (MCFC) cell performance decay modes is briefly reviewed. Emphasis has been given to the cathode-side corrosion of the separator plate, which is the most critical performance-limiting factor due to the growth of thick oxide scales with a poor electrical conductivity causing relevant cell voltage losses on prolonged operations. Voltage decay is related to loss of electrolyte by reaction with the growing oxide scale and to the onset of an ohmic resistance at the point of contact between the corroded separator plate and the cathode. The increase of ohmic resistance over the time is the major cause of voltage decay with the currently used austenitic 316L and 310S stainless steels. A short literature survey is presented in the second part of this paper reporting on the most promising alternative corrosion-resistant alloys or protective coatings suitable for fabrication of long-term stable cathode-side MCFC separator plates.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advancements in Solid Oxide Fuel Cells · Fuel Cells and Related Materials · Corrosion Behavior and Inhibition
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (23)
Show source-provided references
1. Schoeler · J. Electrochem. Soc. · 2000 · 147 · 91610.1149/1.1393292 ↗
2. Sano · Electrochem. Soc. Proc. Ser. · 1997 · 51
3. Frangini · 2003 · 135
4. Yuh · Electrochem. Soc. Proc. Ser. · 1999 · 189
5. Yuh · Electrochem. Soc. Proc. Ser. · 1993 · 158
6. Yuasa · Electrochem. Soc. Proc. Ser. · 1999 · 30
7. Suzuki · Electrochem. Soc. Proc. Ser. · 1997 · 30
8. Fuel Cell Handbook, fifth ed., EG&G Services Parsons Inc., U.S. Department of Energy, DE-AM26-99FT40575, October 2000.
9. Nakayama · Electrochem. Soc. Proc. Ser. · 1999 · 2
10. Yuh · J. Power Sources · 1995 · 56 · 110.1016/0378-7753(95)80001-W ↗
11. Singh · Electrochem. Soc. Proc. Ser. · 1983 · 124
12. Yuh · J. Mater. Eng. Perform. · 2006 · 15 · 110.1361/105994906X117305 ↗
13. Donado · J. Electrochem. Soc. · 1984 · 131 · 253510.1149/1.2115354 ↗
14. Jun · J. Power Sources · 2002 · 112 · 15310.1016/S0378-7753(02)00353-1 ↗
15. US Patent, No. US2002/6,372,374 (April 16, 2002).
16. Biedenkopf · Electrochem. Soc. Proc. Ser. · 1997 · 386
17. Parezanovic · J. Power Sources · 2004 · 135 · 5210.1016/j.jpowsour.2004.04.007 ↗
18. Biedenkopf · Mater. Corros. · 2000 · 51 · 28710.1002/(SICI)1521-4176(200005)51:5<287::AID-MACO287>3.0.CO;2-8 ↗
19. Nishina · 1996 · 185
20. Jian · Corros. Sci. · 2000 · 42 · 157310.1016/S0010-938X(00)00011-1 ↗
21. Ohe · 1996 · 181
22. US Patent, No. US2003/6,645,657 (November 11, 2003).10.1016/S1351-4180(03)00931-0 ↗
23. US Patent Application, No. US2005/0277015 (December 15, 2005).