Aerosol Jet® Printing of functionally graded SOFC anode interlayer and microstructural investigation by low voltage scanning electron microscopy
Source abstract
Abstract
Yttria-stabilized zirconia (YSZ) electrolyte and functionally graded anode interlayers with compositional variation were deposited by Aerosol Jet ® Printing (AJP) using ink suspensions of NiO and YSZ. The AJP system`s dual atomizer configuration that allows on-demand material mixing was used to deposit the graded composite anode interlayer. These layers together with an LSM (strontium doped lanthanum manganite) based pasted cathode layer were integrated in an anode supported SOFC button cell. Cells with graded anode interlayers performed better than cells with a non-graded anode interlayer. The enhancement in electrochemical performance can be attributed to the compositional gradation. The current printing method of fabricating SOFC layers shows clear advantages of high reproducibility. In routine SEM (scanning electron microscopy) evaluation of microstructures, acceleration voltages typically used are 10–20 kV. Due to the similar backscattering coefficients of YSZ and Ni, it is difficult to clearly distinguish between the two phases in the image. In this work, low accelerating voltages (<5 kV) were used to introduce a divergence of the YSZ and Ni backscatter coefficients to investigate the composite layers printed. The backscattering mechanism for image contrast was confirmed and clarified by specially designed SEM experiments that isolated BSE (back scattered electrons) from SE (secondary electrons).
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Electronic and Structural Properties of Oxides · Advancements in Solid Oxide Fuel Cells · Electrocatalysts for Energy Conversion
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (36)
Show source-provided references
1. Minh · J. Am. Ceram. Soc. · 1993 · 76 · 56310.1111/j.1151-2916.1993.tb03645.x ↗
2. Singhal · Solid State Ionics · 2000 · 135 · 30510.1016/S0167-2738(00)00452-5 ↗
3. Isenberg · Solid State Ionics · 1981 · 3/4 · 43110.1016/0167-2738(81)90127-2 ↗
4. Will · Solid State Ionics · 2000 · 131 · 7910.1016/S0167-2738(00)00624-X ↗
5. Teitz · Solid State Ionics · 2002 · 152–153 · 37310.1016/S0167-2738(02)00344-2 ↗
6. Pederson · Vacuum · 2006 · 80 · 106610.1016/j.vacuum.2006.01.072 ↗
7. Negishi · Solid State Ionics · 1981 · 3/4 · 44310.1016/0167-2738(81)90129-6 ↗
8. Nagata · Vacuum · 2002 · 66 · 52310.1016/S0042-207X(02)00126-4 ↗
9. Chen · Thin Solid Films · 1999 · 342 · 6110.1016/S0040-6090(98)01347-9 ↗
10. Franco · J. Fuel Cell. Sci. Technol. · 2007 · 4 · 40610.1115/1.2756846 ↗
11. Schiller · Fuel Cells Bull. · 2000 · 3 · 710.1016/S1464-2859(00)88860-4 ↗
12. Hui · J. Power Sources · 2007 · 170 · 30810.1016/j.jpowsour.2007.03.075 ↗
13. Singhal · 1999
14. Simwonis · J. Mater. Process. Technol. · 1999 · 92–93 · 10710.1016/S0924-0136(99)00214-9 ↗
15. Maffei · Solid State Ionics · 2003 · 159 · 20910.1016/S0167-2738(02)00695-1 ↗
16. Rotureau · J. Eur. Ceram. Soc. · 2005 · 25 · 263310.1016/j.jeurceramsoc.2005.03.115 ↗
17. Zhang · J. Appl. Electrochem. · 2004 · 34 · 63710.1023/B:JACH.0000021926.97895.f7 ↗
18. Schüller · Adv. Eng. Mater. · 2002 · 4 · 65910.1002/1527-2648(20020916)4:9<659::AID-ADEM659>3.0.CO;2-I ↗
19. Kueper · Solid State Ionics · 1992 · 52 · 25110.1016/0167-2738(92)90113-4 ↗
20. De Souza · Solid State Ionics · 1997 · 98 · 5710.1016/S0167-2738(96)00525-5 ↗
21. Young · J. Power Sources · 2008 · 184 · 19110.1016/j.jpowsour.2008.06.018 ↗
22. -Toni · J. Am. Ceram. Soc. · 2008 · 91 · 34610.1111/j.1551-2916.2007.02151.x ↗
23. Sukeshini · Electrochem. Solid-State Lett. · 2009 · 12 · B17610.1149/1.3243468 ↗
24. Sukeshini · J. Am. Ceram Soc. · 2009 · 92 · 291310.1111/j.1551-2916.2009.03349.x ↗
25. Tomov · J. Power Sources · 2010 · 195 · 716010.1016/j.jpowsour.2010.05.044 ↗
26. Yashiro · J. Eur. Ceram. Soc. · 2010 · 30 · 209310.1016/j.jeurceramsoc.2010.04.012 ↗
27. A.M. Sukeshini, P. Gardner, T. Jenkins, T.L. Reitz, R.M. Miller, Proceedings of the ASME 8th International Conference on Fuel Cell Science, Engineering and Technology, vol. 1, Brooklyn, NY, 2010, pp. 325–332.10.1115/FuelCell2010-33262 ↗
28. Sukeshini · ECS Trans. · 2011 · 35 · 215110.1149/1.3570207 ↗
29. http://www.optomec.com.
30. Hart · J. Mater. Sci. · 2001 · 36 · 107710.1023/A:1004857104328 ↗
31. Thydén · Solid State Ionics · 2008 · 178 · 198410.1016/j.ssi.2007.12.075 ↗
32. Goldstein · 1992
33. Joy · Micron · 1996 · 27 · 24710.1016/0968-4328(96)00023-6 ↗
34. Reimer · 1993
35. Dees · J. Electrochem. Soc. · 1887 · 134 · 214110.1149/1.2100839 ↗
36. An · J. Power Sources · 2010 · 195 · 82110.1016/j.jpowsour.2009.08.043 ↗