Performance improvement of anode-supported electrolytes for planar solid oxide fuel cells via a tape-casting/lamination/co-firing technique
Source abstract
Abstract
Abstract Recently, solid oxide fuel cells (SOFCs) have attracted considerable attention because of their low emissions, high-energy conversion efficiency, and flexible usage of various fuels. One of the key problems of applying flat-type SOFCs to large-scale power generation is that unit cells of large area and with a high degree of flatness cannot be manufactured satisfactorily. In this study, the effects of tape-casting, laminating, and co-firing conditions on the flatness of anode-supported electrolyte unit cells have been investigated to improve the cell performance of unit cells. The cells are composed of a Ni-yttria-stabilized zirconia (YSZ) anode, a Ni-YSZ anode functional layer (AFL), a YSZ electrolyte, and a lanthanum strontium manganate (LSM)–YSZ cathode. The flatness of the anode-supported electrolyte is optimized by controlling the firing schedule, the lamination method, and the applied load during firing. A 5 cm × 5 cm (active area 4 cm × 4 cm) unit cell having a reasonable flatness of 55 μm/5 cm shows a higher power output of 11.4 W as compared with 7.7 W a unit cell with a flatness of 200 μm/5 cm, when operating at 800 °C with humidified hydrogen fuel.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advancements in Solid Oxide Fuel Cells · Electronic and Structural Properties of Oxides · Catalysis and Oxidation Reactions
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (14)
Show source-provided references
1. Research on planar SOFC stack10.1016/S0167-2738(02)00348-X ↗
2. Fabrication and performance evaluation of 3-cell SOFC stack based on planar 10cm×10cm anode-supported cells10.1016/j.jpowsour.2005.10.103 ↗
3. Performance of a solid oxide fuel cell fabricated by co-firing10.1016/S0378-7753(97)02758-4 ↗
4. Preparation of YSZ thin films for intermediate temperature solid oxide fuel cells by dip-coating method10.1016/j.memsci.2008.04.038 ↗
5. Study of slurry spin coating technique parameters for the fabrication of anode-supported YSZ Films for SOFCs10.1016/j.jpowsour.2006.09.090 ↗
6. An anode-supported solid oxide fuel cell with spray-coated yttria-stabilized zirconia (YSZ) electrolyte film10.1016/j.ssi.2008.01.094 ↗
7. NiO+YSZ anode substrate for screen-printing fabrication of YSZ electrolyte film in solid oxide fuel cell10.1016/j.jpcs.2008.09.019 ↗
8. Curvature in solid oxide fuel cells10.1016/j.jpowsour.2004.06.034 ↗
9. Characteristics of SOFC single cells with anode active layer via tape casting and co-firing10.1016/j.ijhydene.2008.03.024 ↗
10. Development of IT-SOFC unit cells with anode-supported thin electrolytes via tape casting and co-firing10.1016/j.ijhydene.2007.12.062 ↗
11. Nano-composite materials for high-performance and durability of solid oxide fuel cells10.1016/j.jpowsour.2006.09.015 ↗
12. Sintering arches for cosintering camber camber-free SOFC multilayers10.1111/j.1551-2916.2007.02176.x ↗
13. Effect of NiO/YSZ compositions on the co-sintering process of anode-supported fuel cell10.1016/j.memsci.2005.03.009 ↗
14. Ni-YSZ cermet anode fabricated from NiO–YSZ composite powder for high-performance and durability of solid oxide fuel cells10.1016/j.ssi.2007.06.014 ↗