journal article·2015-11

Anode regeneration following carbon depositions in an industrial-sized anode supported solid oxide fuel cell operating on synthetic diesel reformate

Vanja Subotić, Christoph Schluckner, Jörg Mathe, Jürgen Rechberger, Hartmuth Schroettner, Christoph Hochenauer

Publisher page

Abstract

Abstract Carbon deposition is a primary concern during operation of solid oxide fuel cells (SOFCs) fueled with carbon-containing fuels. It leads to cell degradation and thus reduces SOFC sustained operation and durability. This paper reports on an experimental investigation of carbon formation on the nickel/yttria-stabilized zirconia (Ni/YSZ) anode of an anode-supported SOFC and its regeneration. The cell was fueled with a synthetically produced diesel reformate to investigate and simulate the cell behavior under real operating conditions. For this purpose the cell was operated under load to determine the critical operating time. Rapid carbon generation, such as at open circuit voltage (OCV), can be prevented when the cell is under load. Carbon depositions were detected using scanning electron microscopy (SEM) and further analyzed by Raman spectroscopy. Industrial-size cells suitable for commercial applications were studied. This study proves the reversibility of carbon formation and the reproducibility of the regeneration process. It shows that carbon formations can be recognized and effectively, fully and cell-protecting regenerated. It indicates the excellent possibility of using SOFCs in the automotive industry as an auxiliary power unit (APU) or combined power-heat unit, operated with diesel reformate, without danger from cell degradation caused by carbon-containing fuels.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Advancements in Solid Oxide Fuel Cells · Electrocatalysts for Energy Conversion · Catalysis and Oxidation Reactions

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (58)

Show source-provided references
1. Artificial neural network-based model for calculating the flow composition influence of solid oxide fuel cell10.1115/1.4025922 ↗
2. Fuel processing for low-temperature and high-temperature fuel cells: challenges, and opportunities for sustainable development in the 21st century10.1016/S0920-5861(02)00231-6 ↗
3. Stolten · 2012 · vol 1
4. Effect of simulated coal-derived gas composition on H2S poisoning behavior evaluated using a disaggregation scheme10.1149/1.3232006 ↗
5. Poisoning of SOFC anodes by various fuel impurities10.1016/j.ssi.2008.02.062 ↗
6. Thermodynamic analysis of interactions between Ni-based solid oxide fuel cells (SOFC) anodes and trace species in a survey of coal syngas10.1016/j.jpowsour.2010.03.046 ↗
7. Chlorine poisoning of SOFC Ni-cermet anodes10.1149/1.2980521 ↗
8. N. T. I. Service · 2004
9. Auxiliary power unit based on a solid oxide fuel cell and fuelled with diesel10.1016/j.jpowsour.2005.10.036 ↗
10. Effect of anodic polarization on carbon deposition on Ni/YSZ anodes exposed to methane10.1016/j.apcata.2007.12.039 ↗
11. NiYSZ SOFC anodes Minimization of carbon deposition10.1016/j.jeurceramsoc.2006.04.107 ↗
12. Deactivation of Ni-YSZ Material in Dry Methane and Oxidation of Various Forms of Deposited Carbon10.1115/1.4007272 ↗
13. Carbon deposition and cell performance of Ni-YSZ anode support SOFC with methane fuel10.1016/S0167-2738(02)00243-6 ↗
14. Durability of anode supported solid oxides fuel cells (SOFC) under direct dry-reforming of methane10.1016/j.cej.2013.01.003 ↗
15. Cell performance of SOFC using CH4/CO2 mixed gases10.1016/j.ceramint.2013.11.086 ↗
16. Evaluation of carbon deposition behavior on the nickel/yttrium-stabilized zirconia anode-supported fuel cell fueled with simulated syngas10.1016/j.jpowsour.2010.11.095 ↗
17. Deactivation of nickel-based anode in solid oxide fuel cells operated on carbon-containing fuels10.1016/j.jpowsour.2014.06.082 ↗
18. Sensitivity of nickel cermet anodes to reduction conditions10.1016/j.jpowsour.2005.02.043 ↗
19. Electrical and ionic conductivity of Gd-doped ceria10.1149/1.1393946 ↗
20. Carbon deposition on Ni/YSZ composites exposed to humidified methane10.1016/j.apcata.2006.10.040 ↗
21. The influence of point defects on the resistance of ceria to carbon deposition in hydrocarbon catalysis10.1016/S0167-2738(00)00507-5 ↗
22. Cu–Ni cermet anodes for direct oxidation of methane in solid-oxide fuel cells10.1149/1.1445170 ↗
23. Role of hydrocarbon deposits in the enhanced performance of direct-oxidation SOFCs10.1149/1.1559064 ↗
24. Carbonaceous deposits in direct utilization hydrocarbon SOFC anode10.1016/j.jpowsour.2004.12.029 ↗
25. 2007
26. Coke formation and degradation in SOFC operation with a model reformate from liquid hydrocarbons10.1149/1.2838909 ↗
27. Use of gasification syngas in SOFC: impact of real tar on anode materials10.1016/j.ijhydene.2011.11.047 ↗
28. Carbon deposition on Ni/YSZ anodes exposed to CO/H2 feeds10.1016/j.jpowsour.2009.09.014 ↗
29. Carbon deposition in CH4/CO2 operated SOFC: simulation and experimentation studies10.1016/j.jpowsour.2011.12.005 ↗
30. Effect of hydrogen on carbon formation on Ni/YSZ composites exposed to methane10.1016/j.apcata.2008.06.005 ↗
31. On the predictions of carbon deposition on the nickel anode of a SOFC and its impact on open-circuit conditions10.1149/2.051302jes ↗
32. The impact of steam and current density on carbon formation from biomass gasification tar on Ni/YSZ, and Ni/CGO solid oxide fuel cell anodes10.1016/j.jpowsour.2009.09.046 ↗
33. Carbon deposition in an SOFC fueled by tar-laden biomass gas: a thermodynamic analysis10.1016/j.jpowsour.2004.10.024 ↗
34. Performance of SOFC coupled with n-C4H1O autothermal reformer: carbon deposition and development of anode structure10.1016/j.ijhydene.2010.08.125 ↗
35. Imaging of CH4 decomposition around the Ni/YSZ interfaces under anodic polarization10.1016/j.jpowsour.2004.12.075 ↗
36. In situ Raman studies of carbon removal from high temperature Ni-YSZ cermet anodes by gas phase reforming agents10.1021/jp408192e ↗
37. Performance of anode-supported solid oxide fuel cell in planar-cell channel-type setup10.1016/j.ceramint.2012.10.156 ↗
38. Impact of naphthalene on the performance of SOFCs during operation with synthetic wood gas10.1016/j.jpowsour.2010.09.007 ↗
39. Three-dimensional numerical and experimental investigation of an industrial-sized SOFC fueled by diesel reformat part I: creation of a base model for further carbon deposition modeling10.1016/j.ijhydene.2014.09.108 ↗
40. Solid oxide fuel cells for stationary, mobile, and military applications10.1016/S0167-2738(02)00349-1 ↗
41. A rugged oxygen gas sensor with solid reference for high temperature applications10.1149/1.1343105 ↗
42. Lupton · 1995
43. B. S. Instruments · 2000 · 2005
44. B. S. Instruments · 2007
45. B. S. Instruments · 2007
46. The impact of carbon formation on Ni/YSZ anodes from biomass gasification model tars operating in dry conditions10.1016/j.ces.2008.09.020 ↗
47. Long-term SOFCs button cell testing10.1115/1.4025924 ↗
48. Performance of nickel–scandia-stabilized zirconia cermet anodes for SOFCs in 3% H2O/CH410.1016/j.ssi.2004.06.016 ↗
49. ECN · 2004
50. Thermal imaging of solid oxide fuel cell anode processes10.1016/j.jpowsour.2009.06.072 ↗
51. Deposited carbon distributions on nickel film/oxide substrate systems10.1016/j.ssi.2010.05.003 ↗
52. Effects of crystal Structure of yttria- and scandia-stabilized zirconia in nickel-based {SOFC} anodes on carbon deposition and oxidation behavior10.1016/j.jpowsour.2011.03.092 ↗
53. A study of carbon deposition on solid oxide fuel cell anodes using electrochemical impedance spectroscopy in combination with a high temperature crystal microbalance10.1016/j.jpowsour.2013.02.013 ↗
54. Raman spectroscopy of graphite
55. Comparison between internal steam and CO2 reforming of methane for Ni/YSZ ans Ni/ScSZ SOFC anodes10.1149/1.3435320 ↗
56. Carbon deposition on patterned nickel/yttria stabilized zirconia electrodes for solid oxide fuel cell/solid oxide electrolysis cell modes10.1016/j.jpowsour.2014.11.106 ↗
57. Fundamental mechanisms limiting solid oxide fuel cell durability10.1016/j.jpowsour.2008.02.016 ↗
58. Advances, aging mechanisms and lifetime in solid-oxide fuel cells10.1016/j.jpowsour.2003.09.025 ↗