journal article·2020-02Open access

Microextrusion printing for increasing electrode–electrolyte interface in anode-supported solid oxide fuel cells

Haewon Seo, Hiroshi Iwai, Masashi Kishimoto, Changsheng Ding, Motohiro Saito, Hideo Yoshida

Abstract

Abstract Microextrusion printing is employed for increasing the interfacial area between the electrode and electrolyte of anode-supported solid oxide fuel cells (SOFCs) to enhance their electrochemical performance. A homogeneous anode paste is prepared as an extrusion material and its rheological properties are measured. Then, the printing resolution (line width of the printed paste) is evaluated by extruding the paste under various printing conditions to determine the appropriate stage speed and flow rate for cell fabrication. A mathematical model is also developed to predict the printing resolution from the printing parameters, and the experimental data of the line width agree well with the predicted values, particularly when the contact angle between the paste and substrate is considered. By varying a paste coverage area, two types of anode-supported SOFCs having different interfacial area enlargement ratios are prepared by extruding the anode paste onto the flat anode substrates. The electrochemical performance of the cell is improved by increasing the interfacial area; the current density at the terminal voltage of 0.7 V at 600 °C is 0.17 A cm−2 in a flat cell, whereas 0.32 A cm−2 in a patterned cell whose enlargement factor is 1.14 compared with that of the flat cell.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Advancements in Solid Oxide Fuel Cells · Electronic and Structural Properties of Oxides · Electrocatalysts for Energy Conversion

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (32)

Show source-provided references
1. Structure/performance relations for Ni/yttria-stabilized zirconia anodes for solid oxide fuel cells10.1149/1.1393220 ↗
2. Effect of characteristic lengths of electron, ion, and gas diffusion on electrode performance and electrochemical reaction area in a solid oxide fuel cell10.1002/htj.20373 ↗
3. Characteristic length of oxide-ion conduction for prediction of active thickness in SOFC anode10.1149/05701.2515ecst ↗
4. Enhancing oxygen reduction reactions in solid oxide fuel cells with ultrathin nanofilm electrode–electrolyte interfacial layers10.1021/acs.jpcc.5b09345 ↗
5. Power generation enhancement of solid oxide fuel cell by cathode–electrolyte interface modification in mesoscale assisted by level set-based optimization calculation10.1016/j.jpowsour.2010.12.024 ↗
6. Mesoscale-structure control at anode/electrolyte interface in solid oxide fuel cell10.1016/j.jpowsour.2010.07.025 ↗
7. Fabrication of micro patterned ceramic structure by imprinting process10.2497/jjspm.58.673 ↗
8. Improvement of solid oxide fuel cell by imprinted micropatterns on electrolyte10.1049/mnl.2013.0310 ↗
9. Micrometer-scale imprinting process for ceramic sheet from powder compound material10.1016/j.proeng.2014.10.169 ↗
10. Self-supporting thin yttria-stabilised zirconia electrolytes for solid oxide fuel cells prepared by laser machining10.1149/1.3619759 ↗
11. Optimization of Ni–YSZ solid oxide fuel cell anodes by surface laser melting10.1016/j.apsusc.2015.01.230 ↗
12. A novel method of modifying electrolyte surface at mesoscale for intermediate-temperature solid oxide fuel cells10.1016/j.ceramint.2015.09.057 ↗
13. Modification of electrode/electrolyte interface by laser micro-processing for solid oxide fuel cell10.1016/j.matlet.2017.02.095 ↗
14. Tailoring the electrode-electrolyte interface of Solid Oxide Fuel Cells (SOFC) by laser micro-patterning to improve their electrochemical performance10.1016/j.jpowsour.2017.05.106 ↗
15. Modifying the electrode-electrolyte interface of anode supported solid oxide fuel cells (SOFCs) by laser-machining10.1016/j.enconman.2018.06.044 ↗
16. Ink-jet printing of electrolyte and anode functional layer for solid oxide fuel cells10.1016/j.jpowsour.2008.06.018 ↗
17. Direct ceramic inkjet printing of yttria-stabilized zirconia electrolyte layers for anode-supported solid oxide fuel cells10.1016/j.jpowsour.2010.05.044 ↗
18. Fabrication of thin yttria-stabilized-zirconia dense electrolyte layers by inkjet printing for high performing solid oxide fuel cells10.1016/j.jpowsour.2014.09.085 ↗
19. Three-dimensional printed yttria-stabilized zirconia self-supported electrolytes for solid oxide fuel cell applications10.1016/j.jeurceramsoc.2017.11.033 ↗
20. Prospective use of the 3D printing technology for the microstructural engineering of solid oxide fuel cell components10.3989/cyv.252014 ↗
21. Co-planar type single chamber solid oxide fuel cell with micro-patterned electrodes10.1007/s10832-006-9755-x ↗
22. Direct-write fabrication of integrated planar solid oxide fuel cells10.1007/s10832-006-6005-1 ↗
23. Fabrication and testing of coplanar single-chamber micro solid oxide fuel cells with geometrically complex electrodes10.1016/j.jpowsour.2007.11.013 ↗
24. Single-chamber micro solid oxide fuel cells: study of anode and cathode materials in coplanar electrode design10.1016/j.ssi.2010.01.012 ↗
25. Inkjet printing of polymers: state of the art and future developments10.1002/adma.200300385 ↗
26. Microperiodic structures: direct writing of three-dimensional webs10.1038/428386a ↗
27. Direct writing in three dimensions10.1016/S1369-7021(04)00344-X ↗
28. A guiding framework for microextrusion additive manufacturing10.1115/1.4042607 ↗
29. A corrugated mesoscale structure on electrode–electrolyte interface for enhancing cell performance in anode-supported SOFC10.1016/j.jpowsour.2011.04.051 ↗
30. Historical commentary NIH Image to ImageJ : 25 years of image analysis10.1038/nmeth.2089 ↗
31. Electrochemical impedance spectroscopy analysis of an anode-supported microtubular solid oxide fuel cell10.1149/1.3486805 ↗
32. Corrugated electrode/electrolyte interfaces in SOFC: theoretical and experimental development10.1149/07801.1851ecst ↗