journal article·2020-03Open access

Multiphysical modelling of planar solid oxide fuel cell stack layers

N. Russner, S. Dierickx, A. Weber, R. Reimert, E. Ivers-Tiffée

Abstract

Abstract Anode supported (ASC) and electrolyte supported cells (ESC) represent the most common cell concepts in solid oxide fuel cell (SOFC) technology. In ASCs, mechanical manageability is provided by a porous nickel/yttria-stabilized zirconia (Ni/YSZ) substrate, whereas in ESCs a self-supporting dense YSZ electrolyte is applied. Naturally, the electrical loss contributions arising in ASCs and ESCs differ in quantity, leading to different temperature profiles within planar SOFC stacks. A two-dimensional, finite element method model was developed which considers the underlying chemical and physical processes, and calculates both the electrical performance and the thermal distribution of planar SOFC stack layers operated with reformate fuels. It was then validated by comparing simulation results with extensively measured (i) temperature profiles in SOFC stacks, (ii) gas composition changes along the fuel gas channel of planar ASCs, and (iii) current-voltage characteristics in a temperature range from 650 °C to 800 °C. The subsequent numerical study reveals (i) the different performances of ASC and ESC, (ii) the impact of operation conditions on performance and temperature profile and (iii) how the individual loss contributions generate temperature distributions in the stack layer.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Advancements in Solid Oxide Fuel Cells · Fuel Cells and Related Materials · Electronic and Structural Properties of Oxides

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (70)

Show source-provided references
1. Singhal · 2003
2. Materials and manufacturing technologies for solid oxide fuel cells10.1007/s10853-010-4279-9 ↗
3. 3-D model calculation for planar SOFC10.1016/S0378-7753(01)00792-3 ↗
4. Investigation of solid oxide fuel cell sealing behavior under stack relevant conditions at Forschungszentrum Jülich10.1016/j.jpowsour.2010.09.041 ↗
5. Worldwide SOFC technology Overview and benchmark10.1111/j.1744-7402.2005.02049.x ↗
6. Solid oxide fuel cell technology - features and applications10.1016/j.ssi.2004.07.042 ↗
7. Strength of an electrolyte supported solid oxide fuel cell10.1016/j.jpowsour.2015.07.075 ↗
8. Sunfire industrial SOC stacks and modules10.1149/06801.0125ecst ↗
9. Sites for catalysis and electrochemistry in solid oxide fuel cell (SOFC) anode10.1007/s00339-006-3702-1 ↗
10. Electrochemical impedance modeling of gas transport and reforming kinetics in reformate fueled solid oxide fuel cell anodes10.1016/j.electacta.2013.05.136 ↗
11. Three-dimensional and time-dependent simulation of a planar solid oxide fuel cell stack10.1016/0378-7753(93)01833-4 ↗
12. Three-dimensional thermo-fluid electrochemical modeling of planar SOFC stacks10.1016/S0378-7753(02)00487-1 ↗
13. Comprehensive computational fluid dynamics model of solid oxide fuel cell stacks10.1016/j.ijhydene.2016.05.103 ↗
14. Three dimensional modeling of an solid oxide fuel cell coupling charge transfer phenomena with transport processes and heat generation10.1016/j.electacta.2013.08.018 ↗
15. Evaluation and modeling of the cell resistance in anode-supported solid oxide fuel cells10.1149/1.2801372 ↗
16. Leonide · 2010
17. Reconstruction of porous electrodes by FIB/SEM for detailed microstructure modeling10.1016/j.jpowsour.2010.10.006 ↗
18. Quantification of double-layer Ni/YSZ fuel cell anodes from focused ion beam tomography data10.1016/j.jpowsour.2013.08.021 ↗
19. Performance simulation of current/voltage-characteristics for SOFC single cell by means of detailed impedance analysis10.1016/j.jpowsour.2010.10.052 ↗
20. Electrochemical modeling of the current-voltage characteristics of an SOFC in fuel cell and electrolyzer operation modes10.1149/2.018304jes ↗
21. Internal reforming of methane at Ni/YSZ and Ni/CGO SOFC cermet anodes10.1002/fuce.200600002 ↗
22. Kinetics of (reversible) internal reforming of methane in solid oxide fuel cells under stationary and APU conditions10.1016/j.jpowsour.2009.07.019 ↗
23. A non-isothermal 2D stationary FEM model for hydrocarbon fueled SOFCs stack layers10.1149/07801.2673ecst ↗
24. Stationary FEM model for performance evaluation of planar solid oxide fuel cells connected by metal interconnectors10.1149/2.079406jes ↗
25. Spurk · 2019
26. (Gvc) Verein Deutscher Ingenieure - Gesellschaft Verfahrenstechnik und Chemieingenieurwesen · 2006
27. Wedershoven · 2010
28. Representative volume element size for accurate solid oxide fuel cell cathode reconstructions from focused ion beam tomography data10.1016/j.electacta.2012.04.133 ↗
29. Mass and heat transport in porous SOFC electrodes
30. ThyssenKrupp · 2010
31. Development of cathode contacting for SOFC stacks
32. Advanced impedance model for double-layered solid oxide fuel cell cermet anodes10.1016/j.jpowsour.2019.01.043 ↗
33. Towards intelligent engineering of SOFC electrodes: a review of advanced microstructural characterisation techniques10.1179/095066010X12777205875679 ↗
34. Oxidation of hydrogen on Ni/Yttria-Stabilized zirconia cermet anodes10.1149/1.1838026 ↗
35. Advanced impedance modelling of Ni/8YSZ cermet anodes10.1016/j.electacta.2017.12.029 ↗
36. Combined deconvolution and CNLS fitting approach applied on the impedance response of technical Ni∕8YSZ cermet electrodes10.1149/1.2908860 ↗
37. The chemical oxygen surface exchange and bulk diffusion coefficient determined by impedance spectroscopy of porous. La0.58Sr0.4Co0.2Fe0.8O3−δ (LSCF) cathodes10.1016/j.ssi.2014.11.018 ↗
38. Breitkopf · 2017
39. Electrochemical analysis of reformate-fuelled anode supported SOFC10.1149/1.3597177 ↗
40. CFD analysis of a solid oxide fuel cell with internal reforming: coupled interactions of transport, heterogeneous catalysis and electrochemical processes10.1016/j.jpowsour.2006.08.017 ↗
41. 3D modeling of anode-supported planar SOFC with internal reforming of methane10.1016/j.jpowsour.2007.07.003 ↗
42. The Maxwell-Stefan approach to mass transfer
43. Chapman · 1990
44. Flow and diffusion of gases in porous media10.1063/1.1841191 ↗
45. Modeling elementary heterogeneous chemistry and electrochemistry in solid-oxide fuel cells10.1149/1.2116607 ↗
46. A global thermo-electrochemical model for SOFC systems design and engineering10.1016/S0378-7753(03)00067-3 ↗
47. Definition and sensitivity analysis of a finite volume SOFC model for a tubular cell geometry10.1016/j.jpowsour.2004.01.043 ↗
48. Electrochemical model of the integrated planar solid oxide fuel cell (IP-SOFC)10.1016/j.cej.2004.02.005 ↗
49. A detailed three-dimensional simulation of an IP-SOFC stack10.1115/1.2786468 ↗
50. Modelling of gas transport phenomena in SOFC anodes10.1016/S0378-7753(99)00356-0 ↗
51. Thermodynamic database MALT for Windows with gem and CHD10.1016/S0364-5916(02)00032-9 ↗
52. Radiation heat transfer in SOFC materials and components10.1016/j.jpowsour.2004.11.063 ↗
53. Rohsenow · 1998
54. Thermal conductivity bounds for isotropic, porous materials10.1016/j.ijheatmasstransfer.2004.12.032 ↗
55. Thermal properties of porous Ni/YSZ particulate composites at high temperatures10.2320/matertrans1989.37.1518 ↗
56. The thermal conductivity of nickel10.1016/0017-9310(65)90017-7 ↗
57. Thermal conductivity of dense and porous yttria-stabilized zirconia10.1023/A:1017970924312 ↗
58. Thermal properties of perovskite-type oxides La0.6Sr0.4Co1-XFexO3-δ (0 < x < 1.0)10.1149/07207.0105ecst ↗
59. Thermal conductivity of alumina measured with three techniques10.1520/JTE12368J ↗
60. Radiation heat transfer in planar SOFC electrolytes10.1016/j.jpowsour.2005.07.045 ↗
61. Dependence of entropy change of single electrodes on partial pressure in solid oxide fuel cells10.1149/1.2085944 ↗
62. Thermal energy generated by entropy change in solid oxide fuel cell10.1149/1.2097448 ↗
63. Stephan · 2013
64. Thermal conductivity: IX, experimental investigation of effect of porosity on thermal conductivity10.1111/j.1551-2916.1954.tb20108.x ↗
65. Performance limiting factors in anode-supported cells originating from metallic interconnector design10.1016/j.jpowsour.2010.10.048 ↗
66. SOFC stack and system development at Forschungszentrum Jülich10.1149/2.0491510jes ↗
67. SOFC stack performance under high fuel utilization10.1016/j.ijhydene.2014.11.094 ↗
68. Durability test and degradation behavior of a 2.5 kW SOFC stack with internal reforming of LNG10.1016/j.ijhydene.2013.09.140 ↗
69. Rietveld · 2006 · 1
70. Practical guidelines for reliable electrochemical characterization of solid oxide fuel cells10.1016/j.electacta.2016.12.148 ↗