journal article·2019-07Open access

Mass-transport properties of electrosprayed Pt/C catalyst layers for polymer-electrolyte fuel cells

Julio J. Conde, M. Antonia Folgado, P. Ferreira-Aparicio, Antonio M. Chaparro, Anamika Chowdhury, Ahmet Kusoglu, David Cullen, Adam Z. Weber

Abstract

Abstract Mass-transport properties of electrosprayed catalyst-layers based on Pt/C and ionomer (Nafion) are studied with hydrogen limiting-current technique, water-vapor-uptake, scanning transmission microscopy (STEM), single-cell testing, and impedance spectroscopy. The hydrogen limiting-current technique provides the transport resistance of the layers (RCLmt), which shows to be lower in electrosprayed layers compared with conventional layers, especially at very low platinum loadings (0.025 mgPt·cm−2) and low cell temperature, denoting superior mass-transport properties. Images of the distribution of Pt, F, and C elements reveal the ionomer preferentially interacting with the Pt nanoparticles. Water-vapor-uptake experiments show larger vapor absorption for electrosprayed than conventional catalyst layers. Such large water-vapor uptake capability is combined with superhydrophobicity, ie. very low interaction with water in liquid phase (wettability). Both apparently contradictory properties result from a particular configuration of the amphiphilic ionomer in the electrosprayed layers, and provide ideal conditions for high mass transport and ionic conductivity in a catalyst layer. Electrosprayed layers as cathode catalyst layers show peak response at a loading of 0.17 mgPt·cm−2 (18 μm layer thickness when using Pt/C 20 wt% catalyst) where they provide minimal mass-transport and polarization resistances.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Fuel Cells and Related Materials · Electrocatalysts for Energy Conversion · Supercapacitor Materials and Fabrication

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (46)

Show source-provided references
1. Polymer electrolyte fuel cell model10.1149/1.2085971 ↗
2. Modeling transport in polymer-electrolyte fuel cells10.1021/cr020729l ↗
3. PEM fuel cell electrodes10.1016/j.jpowsour.2003.12.055 ↗
4. Study of membrane electrode assemblies for PEMFC with cathodes prepared by the electrospray method10.1016/j.jpowsour.2007.01.044 ↗
5. Properties of catalyst layers for PEMFC electrodes prepared by electrospray deposition10.1149/1.3425740 ↗
6. High platinum utilization in ultra-low Pt loaded PEM fuel cell cathodes prepared by electrospraying10.1016/j.ijhydene.2010.07.069 ↗
7. Improvement of cell performance in low-Pt-loading PEFC cathode catalyst layers prepared by the electrospray method10.1149/2.0611610jes ↗
8. Fabrication of highly effective self-humidifying membrane electrode assembly for proton exchange membrane fuel cells via electrostatic spray deposition10.1016/j.elecom.2018.06.005 ↗
9. Experimental investigation of electrospray coating technique for electrode fabrication in PEMFCs10.1016/j.egypro.2017.03.523 ↗
10. Catalyst layers for proton exchange membrane fuel cells prepared by electrospray deposition on Nafion membrane10.1016/j.jpowsour.2010.09.096 ↗
11. Study of superhydrophobic electrosprayed catalyst layers using a localized reference electrode technique10.1016/j.jpowsour.2016.06.077 ↗
12. Bear · 1988
13. Modelling the water distribution within a hydrophilic and hydrophobic 3D reconstructed cathode catalyst layer of a proton exchange membrane fuel cell10.1016/j.jpowsour.2012.11.065 ↗
14. Modeling the effects of capillary property of porous media on the performance of the cathode of a PEMFC10.1149/1.2965512 ↗
15. Pore network model of the cathode catalyst layer of proton exchange membrane fuel cells: analysis of water management and electrical performance10.1016/j.ijhydene.2012.09.139 ↗
16. Degradation study by start-up/shut-down cycling of superhydrophobic electrosprayed catalyst layers using a localized reference electrode technique10.1021/acsami.6b15581 ↗
17. Single cell study of water transport in PEMFCs with electrosprayed catalyst layers10.1002/fuce.201700217 ↗
18. The impact of platinum loading on oxygen transport resistance10.1149/2.061212jes ↗
19. Effective-diffusivity measurement of partially-saturated fuel-cell gas-diffusion layers10.1149/2.024211jes ↗
20. Unexplained transport resistances for low-loaded fuel-cell catalyst layers10.1039/C4TA02952F ↗
21. The priority and challenge of high-power performance of low-platinum proton-exchange membrane fuel cells10.1021/acs.jpclett.6b00216 ↗
22. Investigating fuel-cell transport limitations using hydrogen limiting current10.1016/j.ijhydene.2017.01.036 ↗
23. Analysis of oxygen-transport diffusion resistance in proton-exchange-membrane fuel cells10.1149/1.3546038 ↗
24. Impact of platinum loading and catalyst layer structure on PEMFC performance10.1149/2.072308jes ↗
25. Measurement of oxygen transport resistance in PEM fuel cells by limiting current methods10.1149/1.3152226 ↗
26. The analysis of performance loss with low platinum loaded cathode catalyst layer10.1149/1.3496614 ↗
27. Polarization loss correction derived from hydrogen local-resistance measurement in low Pt-loaded polymer-electrolyte fuel cells10.1016/j.elecom.2017.04.008 ↗
28. Fuel-cell catalyst-layer resistance via hydrogen limiting-current measurements10.1149/2.0031907jes ↗
29. Transport resistances in fuel-cell catalyst layers10.1149/08008.0321ecst ↗
30. High-resolution mapping of the PFSA polymer distribution in PEFC electrode layers10.1149/06403.0819ecst ↗
31. Imaging and microanalysis of thin ionomer layers by scanning transmission electron microscopy10.1149/2.1091410jes ↗
32. Water uptake of fuel-cell catalyst layers10.1149/2.031209jes ↗
33. Understanding the behavior of electrosprayed carbon black-Nafion composite layers10.1002/fuce.201700218 ↗
34. Anti-corrosion coating for metal surfaces based on superhydrophobic electrosprayed carbon layers10.1016/j.apmt.2018.08.001 ↗
35. Effects of carbon supports on Pt distribution, ionomer coverage and cathode performance for polymer electrolyte fuel cells10.1016/j.jpowsour.2016.02.091 ↗
36. PEMFC electrode preparation by electrospray: optimization of catalyst load and ionomer content10.1016/j.cattod.2008.12.003 ↗
37. Determination of catalyst unique parameters for the oxygen reduction reaction in a PEMFC10.1149/1.2266294 ↗
38. The effectiveness of platinum/carbon electrocatalysts: dependence on catalyst layer thickness and Pt alloy catalytic effects10.1016/j.electacta.2011.03.072 ↗
39. Fabrication and performance evaluation of structurally-controlled PEMFC catalyst layers by blending platinum-supported and stand-alone carbon black10.1016/j.jpowsour.2013.01.092 ↗
40. A microelectrode study of oxygen reduction at the platinum/recast-Nafion film interface10.1149/1.2069299 ↗
41. Characterization of polymer electrolyte fuel cells using AC impedance spectroscopy10.1149/1.1836485 ↗
42. Impedance of porous electrodes10.1016/0022-0728(95)04177-5 ↗
43. Capacitance of the double-layer at polycrystalline Pt electrodes bearing a surface-oxide film10.1016/S0022-0728(02)00676-9 ↗
44. Electrochemical supercapacitors based on industrial carbon blacks in aqueous H2SO410.1023/A:1017529920916 ↗
46. Thin porous media