Constant dripping wears away a stone: Fatigue damage causing particles' cracking
Source abstract
Abstract
Abstract Once Li+ ions start mobilizing, the crystalline active particles will persistently endure the internal stresses, which originate from the lattice deformation and will remain until reaching a new equilibrium state. While it is still lack of the fundamental understanding on this effect although the particle cracking has been accepted as a failure mode. Here we demonstrate the degradation of particles' mechanical properties and their influence on cathodes' electrochemical performances with a commercial ∼4 μm LiNi1/3Co1/3Mn1/3O2 single-crystals as the sample materials to simplify the model. As Li+ ions reciprocating, the particle strains induce the generation of the line dislocations and accordingly the aggrandization of these bulky defects, and then eventually lacerate the particles mainly along the (110) plane, which is the cleavage plane for the layer oxides. In the selected tested points, the particle cracking is always accompanied with the inflexion of cyclic stability. Obviously, the crystalline’ fracture-strength is gradually fatigued in every cycle, and eventually can't sustain the internal stress to result in the particle cracking and cyclic-stability plummet, similar to ‘constant dripping wears away a stone’. Our approaches demonstrate that the crystalline active materials are suitable to the fracture-damage model, which is another principle for predicting the maximum of LIB's operational life.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advancements in Battery Materials · Advanced Battery Materials and Technologies · Advanced Battery Technologies Research
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (43)
Show source-provided references
1. Battery materials for ultrafast charging and discharging10.1038/nature07853 ↗
2. Nanomaterials for rechargeable lithium batteries10.1002/anie.200702505 ↗
3. Effect of LiFSI concentrations to form thickness- and modulus-controlled SEI layers on lithium metal anodes10.1021/acs.jpcc.8b02314 ↗
4. Mesopores inside electrode particles can change the Li-ion transport mechanism and diffusion-induced stress10.1557/JMR.2010.0183 ↗
5. Over-potential induced Li/Na filtrated depositions using stacked graphene coating on copper scaffold10.1016/j.ensm.2018.06.012 ↗
6. Optimized 4-V spinel cathode material with high energy density for Li-ion cells operating at 60 °C10.1002/aenm.201300510 ↗
7. New insight into Ni-rich layered structure for next-generation Li rechargeable batteries10.1002/aenm.201701788 ↗
8. Nickel-Rich layered lithium transitional-metal oxide for high-energy lithium-ion batteries10.1002/anie.201409262 ↗
9. Prospect and reality of Ni-rich cathode for commercialization10.1002/aenm.201702028 ↗
10. Electrochemical properties of the TiO 2 (B) powders ball mill treated for lithium-ion battery application10.1186/1752-153X-7-174 ↗
11. Understanding the degradation mechanisms of LiNi0.5Co0.2Mn0.3O2 cathode material in lithium ion batteries10.1002/aenm.201300787 ↗
12. Correlation of oxygen non-stoichiometry to the instabilities and electrochemical performance of LiNi0.8Co0.1Mn0. O2 utilized in lithium ion battery10.1016/j.jpowsour.2015.02.095 ↗
13. Improved stability of Ni-rich cathode by the substitutive cations with stronger bonds10.1016/j.electacta.2018.01.119 ↗
14. Electrolytes and interphases in Li-ion batteries and beyond10.1021/cr500003w ↗
15. Single-particle measurements of electrochemical kinetics in NMC and NCA cathodes for Li-ion batteries10.1039/C8EE00001H ↗
16. Cracking causing cyclic instability of LiFePO 4 cathode material10.1016/j.jpowsour.2004.06.059 ↗
17. Effect of electrochemical charging on elastoplastic properties and fracture toughness of LiXCoO210.1149/2.0141411jes ↗
18. Improved cyclic stability of LiNi0.8Co0.1Mn0.1O2 via Ti substitution with a cut-off potential of 4.5 V10.1016/j.ceramint.2015.02.026 ↗
19. High-capacity concentration gradient Li[Ni0.865Co0.120Al0.015]O2 cathode for lithium-ion batteries10.1002/aenm.201703612 ↗
20. Dislocation based stress developments in lithium-ion batteries10.1149/2.090206jes ↗
21. Unravelling the impact of reaction paths on mechanical degradation of intercalation cathodes for lithium-ion batteries10.1021/jacs.5b06178 ↗
22. Intergranular cracking as a major cause of long-term capacity fading of layered cathodes10.1021/acs.nanolett.7b00379 ↗
23. Corrosion/fragmentation of layered composite cathode and related capacity/voltage fading during cycling process10.1021/nl401849t ↗
24. Impact of microcrack generation and surface degradation on a nickel-rich layered Li[Ni0.9Co0.05Mn0.05]O2 cathode for lithium-ion batteries10.1021/acs.chemmater.7b03268 ↗
25. Enhancing interfacial bonding between anisotropically oriented grains using a glue-nanofiller for advanced Li-ion battery cathode10.1002/adma.201506256 ↗
26. High-energy density Core−Shell structured Li[Ni0.95Co0.025Mn0.025]O2 cathode for lithium-ion batteries10.1021/acs.chemmater.7b01425 ↗
27. In situ visualization of state-of-charge heterogeneity within a LiCoO 2 particle that evolves upon cycling at different rates10.1021/acsenergylett.7b00263 ↗
28. Structural stability of LiNiO2 cycled above 4.2 V10.1021/acsenergylett.7b00304 ↗
29. A highly stabilized nickel-rich cathode material by nanoscale epitaxy control for high-energy lithium-ion batteries10.1039/C8EE00155C ↗
30. Improved cycling stability of Li[Ni0.90Co0.05Mn0.05]O2 through microstructure modification by boron doping for Li-ion batteries10.1002/aenm.201801202 ↗
31. Kinetic characteristics up to 4.8 V of layered LiNi1/3Co1/3Mn1/3O2 cathode materials for high voltage lithium-ion batteries10.1016/j.electacta.2017.01.014 ↗
32. A comparative study on structural changes of LiCo1/3Ni1/3Mn1/3O2 and LiNi0.8Co0.15Al0.05O2 during first charge using in situ XRD10.1016/j.elecom.2006.06.005 ↗
33. LiNi1/3Co1/3Mn1/3O2 hollow nano-micro hierarchical microspheres with enhanced performances as cathodes for lithium-ion batteries10.1039/c3ta12375h ↗
34. Self-passivation of a LiNiO2 cathode for a lithium-ion battery through Zr doping10.1021/acsenergylett.8b00805 ↗
35. Nickel-Rich layered cathode materials for automotive lithium-ion batteries: achievements and perspectives10.1021/acsenergylett.6b00594 ↗
36. Capacity fading of Ni-rich Li[NixCoyMn1−x−y]O2 (0.6 ≤ x ≤ 0.95) cathodes for high-energy-density lithium-ion batteries: bulk or surface degradation?10.1021/acs.chemmater.7b05269 ↗
37. Electrochemistry and structural chemistry of LiNiO2 (R3m) for 4 volt secondary lithium cells10.1149/1.2220730 ↗
38. Effect of calcination temperature on the electrochemical properties of nickel-rich LiNi 0.76 Mn 0.14 Co 0.10 O 2 cathodes for lithium-ion batteries10.1016/j.nanoen.2018.04.077 ↗
39. Tailoring grain boundary structures and chemistry of Ni-rich layered cathodes for enhanced cycle stability of lithium-ion batteries10.1038/s41560-018-0191-3 ↗
40. Coupling of electrochemically triggered thermal and mechanical effects to aggravate failure in a layered cathode10.1038/s41467-018-04862-w ↗
41. Intragranular cracking as a critical barrier for high-voltage usage of layer-structured cathode for lithium-ion batteries10.1038/ncomms14101 ↗
42. Surface layer design of cathode materials based on mechanical stability towards long cycle life for lithium secondary batteries10.1016/j.ensm.2017.05.011 ↗
43. Fatigue strength model based on microstructures and damage mechanism of compacted graphite iron10.1016/j.msea.2018.03.110 ↗