Synthesis and properties of reprocessable sulfonated polyimides cross-linked via acid stimulation for use as proton exchange membranes
Source abstract
Abstract
Abstract Cross-linked sulfonated polyimides are one of the most promising materials for proton exchange membrane (PEM) applications. However, these cross-linked membranes are difficult to reprocess because they are insoluble. In this study, a series of cross-linkable sulfonated polyimides with flexible pendant alkyl side chains containing trimethoxysilyl groups is successfully synthesized. The cross-linkable polymers are highly soluble in common solvents and can be used to prepare tough and smooth films. Before the cross-linking reaction is complete, the membranes can be reprocessed, and the recovery rate of the prepared films falls within an acceptable range. The cross-linked membranes are obtained rapidly when the cross-linkable membranes are immersed in an acid solution, yielding a cross-linking density of the gel fraction of greater than 90%. The cross-linked membranes exhibit high proton conductivities and tensile strengths under hydrous conditions. Compared with those of pristine membranes, the oxidative and hydrolytic stabilities of the cross-linked membranes are significantly higher. The CSPI-70 membrane shows considerable power density in a direct methanol fuel cell (DMFC) test. All of these results suggest that the prepared cross-linked membranes have great potential for applications in proton exchange membrane fuel cells.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Fuel Cells and Related Materials · Membrane-based Ion Separation Techniques · MXene and MAX Phase Materials
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (43)
Show source-provided references
1. Alternative polymer systems for proton exchange membranes (PEMs)10.1021/cr020711a ↗
2. Materials for fuel-cell technologies10.1038/35104620 ↗
3. Sulfonated polytriazoles from a new fluorinated diazide monomer and investigation of their proton exchange properties10.1016/j.memsci.2014.06.043 ↗
4. High temperature (HT) polymer electrolyte membrane fuel cells (PEMFC) – a review10.1016/j.jpowsour.2012.11.126 ↗
5. Synthesis and properties of novel sulfonated polyimide membranes for direct methanol fuel cell application10.1016/j.memsci.2007.03.024 ↗
6. Synthesis of novel cardo poly(arylene ether sulfone)s with bulky and rigid side chains for direct methanol fuel cells10.1016/j.jpowsour.2013.07.061 ↗
7. Developments of highly proton-conductive sulfonated polymers for proton exchange membrane fuel cells10.1039/c2py20106b ↗
8. Synthesis and properties of highly branched star-shaped sulfonated block poly(arylene ether)s as proton exchange membranes10.1016/j.memsci.2014.09.015 ↗
9. Morphological anisotropy and proton conduction in multiblock copolyimide electrolyte membranes10.1021/ma500253s ↗
10. Synthesis and properties of highly branched sulfonated poly(arylene ether)s as proton exchange membranes
11. Synthesis and properties of novel sulfonated polyimides containing 1,5-naphthylene moieties10.1002/pola.10988 ↗
12. Synthesis, water stability and proton conductivity of novel sulfonated polyimides from 4,4′-bis(4-aminophenoxy)biphenyl-3,3′-disulfonic acid10.1016/j.memsci.2003.10.037 ↗
13. Preparation and fuel cell performance of catalyst layers using sulfonated polyimide ionomers10.1021/am201360j ↗
14. Synthesis and characterization of rigid-rod sulfonated polyimides bearing sulfobenzoyl side groups as proton exchange membranes10.1016/j.memsci.2007.03.006 ↗
15. Survey of sulfonated polyimide membrane as a good candidate for nafion substitution in fuel cell10.1016/j.ijhydene.2010.03.072 ↗
16. Stability study of sulfonated phthalic and naphthalenic polyimide structures in aqueous medium10.1016/S0032-3861(00)00645-5 ↗
17. Soluble sulfonated naphthalenic polyimides as materials for proton exchange membranes10.1016/S0032-3861(00)00384-0 ↗
18. Degradation of sulfonated polyimide membranes in fuel cell conditions10.1016/j.jpowsour.2005.07.049 ↗
19. Emerging membrane materials for high temperature polymer electrolyte fuel cells: durable hydrocarbon ionomers10.1039/b612153e ↗
20. Branched/crosslinked sulfonated polyimide membranes for polymer electrolyte fuel cells10.1002/marc.200500014 ↗
21. Organic–inorganic hybrid proton exchange membrane based on polyhedral oligomeric silsesquioxanes and sulfonated polyimides containing benzimidazole10.1016/j.jpowsour.2014.04.055 ↗
22. Crosslinked sulfonated polyimide networks as polymer electrolyte membranes in fuel cells10.1002/polb.20522 ↗
23. Chemically modified proton-conducting membranes based on sulfonated polyimides: improved water stability and fuel-cell performance10.1002/pola.21477 ↗
24. Synthesis and characterization of a phosphonated graft copolyimide for direct methanol fuel cells application10.1007/s10965-013-0138-0 ↗
25. Preparation and properties of covalently cross-linked sulfonated copolyimide membranes containing benzimidazole groups10.1016/j.memsci.2008.11.007 ↗
26. Pendant-group cross-linked highly sulfonated co-polyimides for proton exchange membranes10.1016/j.memsci.2014.12.014 ↗
27. Effect of crosslinked chain length in sulfonated polyimide membranes on water sorption, proton conduction, and methanol permeation properties10.1016/j.memsci.2006.09.026 ↗
28. Preparation and properties of the cross-linked sulfonated polyimide containing benzimidazole as electrolyte membranes in fuel cells10.1016/j.memsci.2014.11.023 ↗
29. Water sorption, proton conduction, and methanol permeation properties of sulfonated polyimide membranes cross-linked with N, N-bis (2-hydroxyethyl)-2-aminoethanesulfonic acid (BES)10.1021/ma052226y ↗
30. The effect of crosslinked networks with poly(ethylene glycol) on sulfonated polyimide for polymer electrolyte membrane fuel cell10.1002/polb.20448 ↗
31. Hybrid proton conducting membranes based on sulfonated cross-linked polysiloxane network for direct methanol fuel cell10.1016/j.jpowsour.2011.03.021 ↗
32. Novel hybrid polymer electrolyte membranes prepared by a silane-cross-linking technique for direct methanol fuel cells10.1016/j.jpowsour.2009.08.020 ↗
33. Polymer electrolyte hybrid membranes prepared by radiation grafting of p-styryltrimethoxysilane into poly(ethylene-co-tetrafluoroethylene) films10.1016/j.memsci.2007.03.017 ↗
34. Chemically stable hybrid polymer electrolyte membranes prepared by radiation grafting, sulfonation, and silane-crosslinking techniques10.1002/pola.22876 ↗
35. Proton transportation in an organic–inorganic hybrid polymer electrolyte based on a polysiloxane/poly(allylamine) network10.1002/pola.20754 ↗
36. Proton conductive polyimide electrolytes containing fluorenyl groups: synthesis, properties, and branching effect10.1021/ma0495487 ↗
37. Proton conducting sulfonated poly (imide-benzimidazole) with tunable density of covalent/ionic cross-linking for fuel cell membranes10.1016/j.jpowsour.2015.04.030 ↗
38. Poly(oxyalkylene)diamine-functionalized carbon nanotube/perfluorosulfonated polymer composites: synthesis, water state, and conductivity10.1021/cm8001354 ↗
39. Solution processable octa(aminophenyl)silsesquioxane covalently cross-linked sulfonated polyimides for proton exchange membranes10.1016/j.memsci.2014.12.002 ↗
40. Novel sulfonated polyimides as polyelectrolytes for fuel cell application. 1. Synthesis, proton conductivity, and water stability of polyimides from 4, 4'-diaminodiphenyl ether-2, 2'-disulfonic acid10.1021/ma020005b ↗
41. Degradation property of commercially available si-containing polyimide in simulated atomic oxygen environments for low Earth orbit10.1177/0954008308101535 ↗
42. Direct sulfonation and photocrosslinking of unsaturated poly(styrene-b-butadiene-b-styrene) for proton exchange membrane of direct methanol fuel cell10.1016/j.memsci.2012.09.008 ↗
43. Phosphoric acid-doped cross-linked sulfonated poly(imide-benzimidazole) for proton exchange membrane fuel cell applications10.1016/j.memsci.2015.11.045 ↗