Original implementation of Electrochemical Impedance Spectroscopy (EIS) in symmetric cells: Evaluation of post-mortem protocols applied to characterize electrode materials for Li-ion batteries
Source abstract
Abstract
Abstract Understanding ageing mechanisms of Li-ion batteries is essential for further optimizations. To determine performance loss causes, post-mortem analyses are commonly applied. For each type of post-mortem test, different sample preparation protocols are adopted. However, reports on the reliability of these protocols are rare. Herein, Li-ion pouch cells with LiNi1/3Mn1/3Co1/3O2 – polyvinylidene fluoride positive electrode, graphite–carboxymethyl cellulose–styrene rubber negative electrode and LiPF6 – carbonate solvents mixture electrolyte, are opened and electrodes are recovered following a specified protocol. Negative and positive symmetric cells are assembled and their impedances are recorded. A signal analysis is applied to reconstruct the Li-ion pouch cell impedance from the symmetric cells, then comparison against the pouch cell true impedance allows the evaluation of the sample preparation protocols. The results are endorsed by Transmission Electronic Microscopy (TEM) and Gas Chromatography – Mass Spectrometry (GC-MS) analyses. Carbonate solvents used to remove the salt impacts slightly the surface properties of both electrodes. Drying electrodes under vacuum at 25 °C produces an impedance increase, particularly very marked for the positive electrode. Drying at 50 °C under vacuum or/and exposition to the anhydrous room atmosphere is very detrimental.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advancements in Battery Materials · Advanced Battery Technologies Research · Advanced Battery Materials and Technologies
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (37)
Show source-provided references
1. A review on lithium-ion battery ageing mechanisms and estimations for automotive applications10.1016/j.jpowsour.2013.05.040 ↗
2. Postmortem analysis of calendar-aged graphite/LiFePO4 cells10.1016/j.jpowsour.2013.01.147 ↗
3. Ageing mechanisms in lithium-ion batteries10.1016/j.jpowsour.2005.01.006 ↗
4. Aging of a commercial graphite/LiFePO4 cell10.1149/1.3614529 ↗
5. LiFSI vs. LiPF6 electrolytes in contact with lithiated graphite: comparing thermal stabilities and identification of specific SEI-reinforcing additives10.1016/j.electacta.2013.03.171 ↗
6. Failure mechanisms of LiNi0.5Mn1.5O4 electrode at elevated temperature10.1016/j.jpowsour.2012.04.103 ↗
7. Cycle life evaluation of 3 Ah LixMn2O4-based lithium-ion secondary cells for low-earth-orbit satellites: II. Harvested electrode examination10.1016/j.jpowsour.2008.07.071 ↗
8. Symmetrical impedance study on inactivation induced degradation of lithium electrodes for batteries beyond lithium-ion10.1149/2.089405jes ↗
9. Failure mechanism of Li-ion battery at overcharge conditions10.1007/s10008-007-0449-3 ↗
10. Probing the aging effects on nanomechanical properties of a LiFePO4 cathode in a large format prismatic cell10.1016/j.jpowsour.2015.01.114 ↗
11. Performance degradation of high-power lithium-ion cells—electrochemistry of harvested electrodes10.1016/j.jpowsour.2007.03.071 ↗
12. Main aging mechanisms in Li ion batteries10.1016/j.jpowsour.2005.03.172 ↗
13. A review of the features and analyses of the solid electrolyte interphase in Li-ion batteries10.1016/j.electacta.2010.05.072 ↗
14. Electrochemical investigations on advanced lithium-ion batteries by three-electrode measurements10.1149/1.1825385 ↗
15. Dollé · 2002
16. Development of reliable three-electrode impedance measurements in plastic Li-ion batteries10.1149/1.1381071 ↗
17. Electrode contributions to the impedance of a high-energy density Li-ion cell designed for EV applications10.1016/j.ssi.2013.02.016 ↗
18. measurements and simulations of electrochemical impedance spectroscopy of a three-electrode coin cell design for Li-ion cell testing10.1149/2.0311409jes ↗
19. Analysis of three-electrode setups for AC-impedance measurements on lithium-ion cells by FEM simulations10.1149/2.100202jes ↗
20. Enhanced graphical representation of electrochemical impedance data10.1149/1.2168377 ↗
21. Distinction of impedance responses of Li-ion batteries for individual electrodes using symmetric cells10.1016/j.electacta.2014.01.091 ↗
22. Theoretical and experimental analysis of porous electrodes for lithium-ion batteries by electrochemical impedance spectroscopy using a symmetric cell10.1149/2.057207jes ↗
23. Impedance spectroscopy characterization of porous electrodes under different electrode thickness using a symmetric cell for high-performance lithium-ion batteries10.1021/jp512564f ↗
24. Simultaneous measurements and modeling of the electrochemical impedance and the cyclic voltammetric characteristics of graphite electrodes doped with lithium10.1021/jp9701909 ↗
25. A review of conduction phenomena in Li-ion batteries10.1016/j.jpowsour.2010.06.060 ↗
26. A. Martinet, Etude Physico-Chimique des Electrolytes d'Hexafluorophosphate de Lithium pour une Application dans la Batterie Lithium-Ion, Institut National Polytechnique de Grenoble, n.d.
27. Impedance-based simulation models of supercapacitors and Li-ion batteries for power electronic applications10.1109/TIA.2005.847280 ↗
28. An electrical circuit for modeling the dynamic response of Li-ion polymer batteries10.1149/1.2999375 ↗
29. Interfacing electrolytes with electrodes in Li ion batteries10.1039/c0jm04309e ↗
30. Structural and kinetic characterization of lithium intercalation into carbon anodes for secondary lithium batteries10.1149/1.2044017 ↗
31. Deciphering the multi-step degradation mechanisms of carbonate-based electrolyte in Li batteries10.1016/j.jpowsour.2007.11.110 ↗
32. Gas chromatography/mass spectrometry as a suitable tool for the Li-ion battery electrolyte degradation mechanisms study10.1021/ac101948u ↗
33. Ethylene bis-carbonates as telltales of SEI and electrolyte health, role of carbonate type and new additives10.1016/j.electacta.2014.05.072 ↗
34. Formation mechanism of alkyl dicarbonates in Li-ion cells10.1016/j.jpowsour.2005.02.021 ↗
35. Aging characteristics of high-power lithium-ion cells with LiNi0.8Co0.15Al0.05O2 and Li4/3Ti5/3O4 electrodes10.1016/j.electacta.2005.05.008 ↗
36. Influence of the carboxymethyl cellulose binder on the multiscale electronic transport in carbon–LiFePO4 nanocomposites10.1039/c2jm34964g ↗
37. Direct visualization of the hydration layer on alumina nanoparticles with the fluid cell STEM in situ10.1038/srep09830 ↗