Stochastic capacity loss and remaining useful life models for lithium-ion batteries in plug-in hybrid electric vehicles
Source abstract
Abstract
Abstract This paper proposes and validates a stochastic prognostic model for capacity loss and remaining useful life (RUL) in lithium-ion pouch cells with graphite anodes and NMC–LMO cathodes. The model was developed using data from an experimental campaign which studied the effect of C-rate, minimum SOC, temperature, and charge-depleting usage on aging in plug-in hybrid electric vehicle (PHEV) batteries. The proposed algorithm estimates capacity loss and RUL as a function of resistance and operating conditions including charge sustaining/depleting use and temperature, and its stochastic nature is able to capture the variability of the data. The battery resistance is estimated using a particle filter developed for an experimentally validated equivalent circuit battery model. The particle filter is designed to perform combined estimation of State of Charge and internal resistance, which is used as an input to the stochastic capacity loss model. Finally, the stochastic model predicts the capacity loss with a root mean square error (RMSE) of less than 1% and RUL with an RMSE of 1.6 kAh, and can be integrated into on-board battery management systems in PHEV to monitor the health of lithium-ion batteries.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advanced Battery Technologies Research · Reliability and Maintenance Optimization · Electric Vehicles and Infrastructure
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (33)
Show source-provided references
1. Capacity and power fade cycle-life model for plug-in hybrid electric vehicle lithium-ion battery cells containing blended spinel and layered-oxide positive electrodes10.1016/j.jpowsour.2014.12.047 ↗
2. Simulation of capacity fade in lithium-ion batteries10.1016/S0378-7753(02)00490-1 ↗
3. A review on prognostics and health monitoring of li-ion battery10.1016/j.jpowsour.2011.03.101 ↗
4. Practical capacity fading model for li-ion battery cells in electric vehicles10.1109/TPEL.2012.2235083 ↗
5. Mathematical modeling of the capacity fade of li-ion cells10.1016/S0378-7753(03)00531-7 ↗
6. Battery health prognosis for electric vehicles using sample entropy and sparse Bayesian predictive modeling
7. Lithium-ion battery health prognosis based on a real battery management system used in electric vehicles10.1109/TVT.2018.2864688 ↗
8. Aging and characterization of li-ion batteries in a hev application for lifetime estimation10.3182/20100712-3-DE-2013.00186 ↗
9. A novel model-based algorithm for battery prognosis10.3182/20090630-4-ES-2003.00152 ↗
10. A simplified electrochemical and thermal aging model of LiFePO4-graphite li-ion batteries: power and capacity fade simulations10.1149/2.053304jes ↗
11. Li-ion cell aging model online parameter estimation for improved prognosis
12. A probabilistic approach for prognosis of battery pack aging10.1016/j.jpowsour.2017.01.130 ↗
13. Model-based life estimation of li-ion batteries in PHEVs using large scale vehicle simulations: An introductory study
14. Real time battery power capability estimation
15. Lithium-ion batteries health prognosis considering aging conditions10.1109/TPEL.2018.2873247 ↗
16. State of charge estimation using extended Kalman filters for battery management system
17. Lithium-ion battery state of charge and critical surface charge estimation using an electrochemical model-based extended Kalman filter
18. Dual nonlinear Kalman filter-based soc and remaining capacity estimation for an electric scooter li-NMC battery pack10.3390/en13030540 ↗
19. Model-based adaptive joint estimation of the state of charge and capacity for lithium–ion batteries in their entire lifespan10.3390/en13061410 ↗
20. A technique for estimating the state of health of lithium batteries through a dual-sliding-mode observer
21. An interconnected observer for concurrent estimation of bulk and surface concentration in the cathode and anode of a lithium-ion battery10.1109/TIE.2018.2793194 ↗
22. Estimation of battery state-of-charge for electric vehicles using an MCMC-based auxiliary particle filter
23. Comparison of a particle filter and other state estimation methods for prognostics of lithium-ion batteries10.1016/j.jpowsour.2015.04.020 ↗
24. Pesaran · 2009
25. Model-based parameter identification of healthy and aged li-ion batteries for electric vehicle applications10.4271/2015-01-0252 ↗
26. A tutorial on particle filters for online nonlinear/non-Gaussian Bayesian tracking10.1109/78.978374 ↗
27. Particle filter theory and practice with positioning applications10.1109/MAES.2010.5546308 ↗
28. Van Der Merwe · 2004
29. A case study to predict the capacity fade of the battery of electrified vehicles in real-world use conditions
30. Effect of partial cycling of NCA/Graphite cylindrical cells in different SOC intervals10.1149/1945-7111/ab78fd ↗
31. Investigation of capacity recovery during rest period at different states-of-charge after cycle life test for prismatic Li(Ni1∕3Mn1∕3Co1∕3)O2-graphite cells10.1016/j.est.2019.01.004 ↗
32. Irreversible calendar aging and quantification of the reversible capacity loss caused by anode overhang10.1016/j.est.2018.04.029 ↗
33. Investigation of significant capacity recovery effects due to long rest periods during high current cyclic aging tests in automotive lithium ion cells and their influence on lifetime10.1016/j.est.2019.02.015 ↗