journal article·2020-07

Designing advanced P3-type K0.45Ni0.1Co0.1Mn0.8O2 and improving electrochemical performance via Al/Mg doping as a new cathode Material for potassium-ion batteries

Rongbin Dang, Na Li, Yuqiang Yang, Kang Wu, Qingyuan Li, Yu Lin Lee, Xiangfeng Liu, Zhongbo Hu, Xiaoling Xiao

Publisher page

Abstract

Abstract Developing stable and advanced cathode materials that accommodate larger K-ions becomes a serious challenge for potassium-ion batteries (KIBs). Herein, we propose a new layered oxide K0.45Ni0.1Co0.1Mn0.8O2 (pristine) without phase transition during the cycling process as a cathode material for KIBs. The pristine material is further doped with Mg2+ and Al3+ (K0.45Ni0.1Co0.1Mg/Al0.05Mn0.75O2) into Mn site to pursue better electrochemical performances. A detailed insight into the structural stability, charge compensation mechanism, and K+ kinetics study is clearly provided. The Mg/Al-doped electrodes exhibit outstanding cycling performance and rate capability because of the enhanced layered structure stability, enlarged K+ diffusion layer and optimized Jahn-Taller distortion of Mn3+. Furthermore, the Mg-doped electrode shows better effect in the suppression of Jahn-Taller distortion of Mn3+ by comparison with that of Al-doped electrode, but at the expanse of lower capacity as the decreased content of active redox of Mn3+/Mn4+.This research provides new insight into the future design of advanced cathode materials for KIBs.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Advancements in Battery Materials · Advanced Battery Materials and Technologies · Advanced battery technologies research

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (47)

Show source-provided references
1. Research on advanced materials for li-ion batteries10.1002/adma.200901710 ↗
2. Building better batteries10.1038/451652a ↗
3. A review on the key issues for lithium-ion battery management in electric vehicles10.1016/j.jpowsour.2012.10.060 ↗
4. A review of safety-focused mechanical modeling of commercial lithium-ion batteries10.1016/j.jpowsour.2017.12.034 ↗
5. Room-temperature stationary sodium-ion batteries for large-scale electric energy storage10.1039/c3ee40847g ↗
6. Layered oxide cathodes for sodium-ion batteries: phase transition, air stability, and performance10.1002/aenm.201701912 ↗
7. Sodium-ion batteries10.1002/adfm.201200691 ↗
8. The emerging chemistry of sodium ion batteries for electrochemical energy storage10.1002/anie.201410376 ↗
9. Research development on sodium-ion batteries10.1021/cr500192f ↗
10. Advancement of technology towards developing Na-ion batteries10.1016/j.jpowsour.2017.12.053 ↗
11. A P2/P3 composite layered cathode for high-performance Na-ion full batteries10.1016/j.nanoen.2018.10.072 ↗
12. Anionic redox reaction-induced high-capacity and low-strain cathode with suppressed phase transition10.1016/j.joule.2018.10.022 ↗
13. Na+/vacancy disordering promises high-rate Na-ion batteries10.1126/sciadv.aar6018 ↗
14. Sodium-ion batteries: new opportunities beyond energy storage by lithium10.1016/j.jpowsour.2018.05.089 ↗
15. A high-rate and long cycle life aqueous electrolyte battery for grid-scale energy storage10.1038/ncomms2139 ↗
16. High energy K-ion batteries based on P3-Type K0.5MnO2 hollow submicrosphere cathode10.1016/j.jpowsour.2019.226913 ↗
17. High-capacity aqueous potassium-ion batteries for large-scale energy storage10.1002/adma.201604007 ↗
18. An initial review of the status of electrode materials for potassium-ion batteries10.1002/aenm.201602911 ↗
19. Electrochemical intercalation of potassium into graphite10.1002/adfm.201602248 ↗
20. Potassium intercalation into graphite to realize high-voltage/high-power potassium-ion batteries and potassium-ion capacitors10.1016/j.elecom.2015.09.002 ↗
21. Potassium ion batteries with graphitic materials10.1021/acs.nanolett.5b03667 ↗
22. Hard carbon microspheres: potassium-ion anode versus sodium-ion anode10.1002/aenm.201501874 ↗
23. Carbon electrodes for K-ion batteries10.1021/jacs.5b06809 ↗
24. Hard-soft composite carbon as a long-cycling and high-rate anode for potassium-ion batteries10.1002/adfm.201700324 ↗
25. Recent progress in rechargeable potassium batteries10.1002/adfm.201802938 ↗
26. Fast chargeable P2-K~2/3Ni1/3Mn2/3O2 for potassium ion battery cathodes10.1016/j.jpowsour.2019.226992 ↗
27. Potassium prussian blue nanoparticles: a low-cost cathode material for potassium-ion batteries10.1002/adfm.201604307 ↗
28. Investigation of potassium storage in layered P3-type K0.5MnO2 cathode10.1002/adma.201702480 ↗
29. Development of P3-K0.69CrO2 as an ultra-high-performance cathode material for K-ion batteries10.1039/C8EE01365A ↗
30. Storage characteristics of LiNi0.8Co0.1+xMn0.1-xO2 (x=0, 0.03, and 0.06) cathode materials for lithium batteries10.1149/1.2830946 ↗
31. A comprehensive study of the role of transition metals in O3-type layered NaNixCoyMnzO2 (x=1/3, 0.5, 0.6, and 0.8) cathodes for sodium-ion batteries10.1039/C6TA07392A ↗
32. Layered potassium-deficient P2-and P3-type cathode materials KxMnO2 for K-ion batteries10.1016/j.cej.2018.09.012 ↗
33. K0.67Ni0.17Co0.17Mn0.66O2: a cathode material for potassium-ion battery10.1016/j.elecom.2017.08.008 ↗
34. New insights into designing high-rate performance cathode materials for sodium ion batteries by enlarging the slab-spacing of the Na-ion diffusion layer10.1039/C5TA10589G ↗
35. CuO-coated and Cu2+-doped Co-modified P2-type Na2/3Ni1/3Mn2/3O2 for sodium-ion batteries10.1039/C8CP06248J ↗
36. New insights into the roles of Mg in improving the rate capability and cycling stability of O3-NaMn0.48Ni0.2Fe0.3Mg0.02O2 for sodium-ion batteries10.1021/acsami.7b18226 ↗
37. Different effects of Al substitution for Mn or Fe on the structure and electrochemical properties of Na0.67Mn0.5Fe0.5O2 as a sodium ion battery cathode material10.1021/acs.inorgchem.8b00284 ↗
38. P2-type Na2/3Mn1-xAlxO2 cathode material for sodium-ion batteries: Al-doped enhanced electrochemical properties and studies on the electrode kinetics10.1016/j.jpowsour.2017.04.076 ↗
39. A sodium manganese oxide cathode by facile reduction for sodium batteries10.1002/asia.201301510 ↗
40. Structurally stable Mg-doped P2-Na2/3Mn1-yMgyO2 sodium-ion battery cathodes with high rate performance: insights from electrochemical, NMR and diffraction studies10.1039/C6EE01750A ↗
41. P2-and P3-KxCoO2 as an electrochemical potassium intercalation host10.1039/C7CC00806F ↗
42. Novel copper redox-based cathode materials for room-temperature sodium-ion batteries10.1088/1674-1056/23/11/118202 ↗
43. Tuning P2-structured cathode material by Na-site Mg substitution for Na-ion batteries10.1021/jacs.8b08638 ↗
44. Honeycomb-ordered Na3Ni1.5M0.5BiO6 (M = Ni, Cu, Mg, Zn) as high-voltage layered cathodes for sodium-ion batteries10.1021/acsenergylett.7b00930 ↗
45. K0.54[Co0.5Mn0.5]O2: new cathode with high power capability for potassium-ion batteries10.1016/j.nanoen.2019.04.062 ↗
46. K-ion batteries based on a P2-type K0.6CoO2 cathode10.1002/aenm.201700098 ↗
47. Air-stable copper-based P2-Na7/9Cu2/9Fe1/9Mn2/3O2 as a new positive electrode material for sodium-ion batteries10.1002/advs.201500031 ↗