Isothermal calorimeter for measurements of time-dependent heat generation rate in individual supercapacitor electrodes
Source abstract
Abstract
Abstract Heat generation in electric double layer capacitors (EDLCs) may lead to temperature rise and reduce their lifetime and performance. This study aims to measure the time-dependent heat generation rate in individual carbon electrode of EDLCs under various charging conditions. First, the design, fabrication, and validation of an isothermal calorimeter are presented. The calorimeter consisted of two thermoelectric heat flux sensors connected to a data acquisition system, two identical and cold plates fed with a circulating coolant, and an electrochemical test section connected to a potentiostat/galvanostat system. The EDLC cells consisted of two identical activated carbon electrodes and a separator immersed in an electrolyte. Measurements were performed on three cells with different electrolytes under galvanostatic cycling for different current density and polarity. The measured time-averaged irreversible heat generation rate was in excellent agreement with predictions for Joule heating. The reversible heat generation rate in the positive electrode was exothermic during charging and endothermic during discharging. By contrast, the negative electrode featured both exothermic and endothermic heat generation during both charging and discharging. The results of this study can be used to validate existing thermal models, to develop thermal management strategies, and to gain insight into physicochemical phenomena taking place during operation.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Supercapacitor Materials and Fabrication · Advanced Battery Technologies Research · Fuel Cells and Related Materials
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (45)
Show source-provided references
1. US Department of Energy · 2007
2. Conway · 1999
3. Multi-level reduced-order thermal modeling of electrochemical capacitors10.1016/j.jpowsour.2005.07.072 ↗
4. Electrochemical capacitor thermal management issues at high-rate cycling10.1016/j.electacta.2006.02.056 ↗
5. Ultracapacitors: why, how, and where is the technology10.1016/S0378-7753(00)00485-7 ↗
6. R&D considerations for the performance and application of electrochemical capacitors10.1016/j.electacta.2007.01.011 ↗
7. Electrochemical capacitors: challenges and opportunities for real-world applications10.1149/2.F08081IF ↗
8. Heat generation in double layer capacitors10.1016/j.jpowsour.2005.12.070 ↗
9. Supercapacitor thermal modeling and characterization in transient state for industrial applications10.1109/TIA.2009.2018879 ↗
10. Thermal modeling and heat management of supercapacitor modules for vehicle applications10.1016/j.jpowsour.2009.06.038 ↗
11. Ageing behaviour of electrochemical double layer capacitors: Part II. lifetime simulation model for dynamic applications10.1016/j.jpowsour.2007.07.059 ↗
12. Effect of temperature on the capacitance of carbon nanotube supercapacitors10.1021/nn900500n ↗
13. Predictions of specific energies and specific powers of double-layer capacitors using a simplified model10.1149/1.1393278 ↗
14. Thermal modeling of porous insertion electrodes10.1149/1.1531194 ↗
15. Measuring time-dependent heat profiles of aqueous electrochemical capacitors under cycling10.1016/j.tca.2011.07.027 ↗
16. First-principles thermal modeling of electric double layer capacitors under constant-current cycling10.1016/j.jpowsour.2013.08.024 ↗
17. Thermal effects of asymmetric electrolytes in electric double layer capacitors10.1016/j.jpowsour.2014.09.080 ↗
18. First-principles thermal modeling of hybrid pseudocapacitors under galvanostatic cycling10.1016/j.jpowsour.2016.10.005 ↗
19. Supercapacitor characterization and thermal modelling with reversible and irreversible heat effect10.1109/TPEL.2011.2145422 ↗
20. Entropy changes due to structural transformation in the graphite anode and phase change of the LiCoO2 cathode10.1149/1.1393549 ↗
21. A calorimetric study on a cylindrical type lithium secondary battery by using a twin-type heat conduction calorimeter10.1016/S0040-6031(97)00083-X ↗
22. Thermal studies of a lithium-ion battery10.1016/S0378-7753(96)02583-9 ↗
23. In situ studies of LixMn2O4 and LixAl0.17Mn1.83O3.97S0.03 cathode by IMC10.1149/1.1851035 ↗
24. Thermal characteristics of LixMn2O4 spinel10.1149/1.1387224 ↗
25. In situ measurements of heat generation in a Li/mesocarbon microbead half-cell10.1149/1.1541672 ↗
26. A critical review of thermal issues in lithium-ion batteries10.1149/1.3515880 ↗
27. Calorimetric measurement of the heat generated by a double-layer capacitor cell under cycling10.1016/j.tca.2010.06.022 ↗
28. Electrochemical-calorimetric studies of lithium-ion cells10.1149/1.1838509 ↗
29. greenTEG · 2016
30. Fully automated measurement setup for non-destructive characterization of thermoelectric materials near room temperature10.1063/1.4737880 ↗
31. Synthesis, stability, transport properties, and surface wettability of reduced graphene oxide/water nanofluids10.1016/j.ijthermalsci.2015.06.011 ↗
32. Gadkaree · 2013
33. Yaws · 1995 · vol. 3
34. The thermal conductivity of dimethyl carbonate in the liquid phase10.1016/j.fluid.2003.10.018 ↗
35. Liquid Thermal conductivities of acetonitrile, diethyl sulfide, hexamethyleneimine, tetrahydrothiophene, and tetramethylethylenediamine10.1021/je0498661 ↗
36. Recent advances in continuum modeling of interfacial and transport phenomena in electric double layer capacitors10.1149/2.0211505jes ↗
37. Testing of electrochemical capacitors: capacitance, resistance, energy density, and power capability10.1016/j.electacta.2010.04.074 ↗
38. A measurement method for determination of dc internal resistance of batteries and supercapacitors10.1016/j.elecom.2009.12.004 ↗
39. Best practice methods for determining an electrode material's performance for ultracapacitors10.1039/c0ee00074d ↗
40. Kotz · 2012
41. Kelter · 2008 · vol. 10
42. Novel polymer Li-ion binder carboxymethyl cellulose derivative enhanced electrochemical performance for Li-ion batteries10.1016/j.carbpol.2014.06.034 ↗
43. Cellulose as a binding material in graphitic anodes for Li ion batteries: a performance and degradation study10.1016/S0013-4686(02)00784-3 ↗
44. Study on effects of carboxymethyl cellulose lithium (CMC-Li) synthesis and electrospinning on high-rate lithium ion batteries10.1007/s10570-013-0108-z ↗
45. Free-energy and structural analysis of ion solvation and contact ion-pair formation of Li+ with BF4− and PF6− in water and carbonate solvents10.1021/jp3011487 ↗