journal article·2017-12

Gadolinium doped ceria interlayers for Solid Oxide Fuel Cells cathodes: Enhanced reactivity with sintering aids (Li, Cu, Zn), and improved densification by infiltration

Clement Nicollet, Jenny Waxin, Thomas Dupeyron, Aurélien Flura, Jean-Marc Heintz, Jan Pieter Ouweltjes, Paolo Piccardo, Aline Rougier, Jean-Claude Grenier, Jean-Marc Bassat

Publisher page

Abstract

This paper reports the study of the densification of 20% Gd doped ceria (Ce0.8Gd0.2O1.9 (GDC)) interlayers in SOFC cathodes through two different routes: the well-known addition of sintering elements, and an innovative densification process by infiltration. First, Li, Cu, and Zn nitrates were added to GDC powders. The effect of these additives on the densification was studied by dilatometry on pellets, and show a large decrease of the sintering temperature from 1330 °C (pure GDC), down to 1080 °C, 950 °C, and 930 °C for Zn, Cu, and Li addition, respectively. However, this promising result does not apply to screen-printed layers, which are more porous than pellets and in which the shrinkage is constrained by the substrate. The second approach consists in preparing a pre-sintered GDC layer, which is subsequently infiltrated with Ce and Gd nitrates and sintered at 1250 °C to increase its density. Such an approach results in highly dense GDC interlayers. Using La0.6Sr0.4Co0.2Fe0.8O3-δ (LSCF) as electrode, the influence of the interlayers on the cathode performance was studied. The addition of sintering aids dramatically increases the cell resistances, most likely because the additives increase the reactivity between GDC and either Yttria Stabilized Zirconia (YSZ) or LSCF, thus losing the expected benefit related to the decrease of sintering temperatures. The interlayers prepared by infiltration do not induce additional resistances in the cell, which results in power densities of single cells 40–50% higher than those of cells prepared with commercial GDC interlayers, making this approach a valuable alternative to sintering aids.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Advancements in Solid Oxide Fuel Cells · Electronic and Structural Properties of Oxides · Magnetic and transport properties of perovskites and related materials

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (52)

Show source-provided references
1. Ln0.4Sr0.6Co0.8Fe0.2O3-δ (Ln=La, Pr, Nd, Sm, Gd) for the electrode in solid oxide fuel cells10.1016/S0167-2738(98)00428-7 ↗
2. Ferrite-based perovskites as cathode materials for anode-supported solid oxide fuel cells. part ii. influence of the CGO interlayer10.1016/j.ssi.2005.12.010 ↗
3. Efficiency of a dense thin CGO buffer layer for solid oxide fuel cell operating at intermediate temperature10.1016/j.ssi.2013.07.004 ↗
4. Effect of Gd0.2Ce0.8O2 sintering temperature on formation of a SrZrO3 blocking layer between Y0.16Zr0.84O2, Gd0.2Ce0.8O2 and La0.58Sr0.4Co0.2Fe0.8O3
5. Thin film coating technologies of (Ce,Gd)O2-δ interlayers for application in ceramic high-temperature fuel cells10.1016/j.tsf.2006.10.127 ↗
6. Element interdiffusion at electrolyte-cathode interfaces in ceramic high-temperature fuel cells10.1016/j.ssi.2009.01.014 ↗
7. Spray pyrolysis of doped-ceria barrier layers for solid oxide fuel cells10.1016/j.surfcoat.2017.01.066 ↗
8. Nature and functionality of oxygen/cathode/electrolyte-interfaces in SOFCs10.1149/06602.0079ecst ↗
9. The effect of fabrication conditions for GDC buffer layer on electrochemical performance of solid oxide fuel cells10.1007/BF03353744 ↗
10. Ce Gd0.2O2-δ protecting layers manufactured by physical vapor deposition for IT-SOFC10.1016/j.ssi.2007.12.008 ↗
11. Electrochemical performance and degradation of (La0.6Sr0.4)0.99CoO3-δ as porous SOFC-cathode10.1016/j.ssi.2007.11.010 ↗
12. Sr and Zr diffusion in LSCF/10GDC/8YSZ triplets for solid oxide fuel cells (SOFCs)10.1016/j.jpowsour.2014.02.046 ↗
13. Electrochemical property of solid solutions formed in (La,Sr)(Co,Fe)O3-δ cathode/doped-CeO2 interlayer/Y2O3-ZrO2 electrolyte system during operation of solid oxide fuel cells10.1016/j.ssi.2016.12.014 ↗
14. Gadolinia-doped ceria and yttria stabilized zirconia interfaces: regarding their application for SOFC technology10.1016/S1359-6454(00)00261-5 ↗
15. Total electrical conductivity and defect structure of ZrO2-CeO2-Y2O3-Gd2O3 solid solutions10.1016/S0167-2738(00)00477-X ↗
16. Low-temperature preparation of dense (Gd,Ce)O2-δ-Gd2O3 composite buffer layer by aerosol deposition for YSZ electrolyte-based SOFC10.1016/j.ijhydene.2012.03.148 ↗
17. Low temperature deposited (Ce,Gd)O2-x interlayer for La0.6Sr0.4Co0.2Fe0.8O3 cathode based solid oxide fuel cell10.1016/j.jpowsour.2010.10.070 ↗
18. Prediction and evaluation of sintering aids for cerium gadolinium oxide10.1016/j.ssi.2007.05.019 ↗
19. Effect of gallia addition on the sintering behavior of samaria-doped ceria10.1111/j.1151-2916.1999.tb01747.x ↗
20. The effect of alumina and Cu addition on the electrical properties and the SOFC performance of Gd-doped CeO2 electrolyte10.1016/j.ssi.2009.02.021 ↗
21. Sintering and properties of nanosized ceria solid solutions10.1016/S0167-2738(00)00437-9 ↗
22. Effects of firing conditions and addition of Co on bulk and grain boundary properties of CGO10.1016/j.ssi.2005.06.023 ↗
23. The effect of Co and Zn addition on densification and electrical properties of ceria-based nanopowders10.1590/1980-5373-MR-2015-0643 ↗
24. Zn as sintering aid for ceria-based electrolytes10.1016/j.ssi.2013.11.002 ↗
25. Effect of Li2O content and sintering temperature on the grain growth and electrical properties of Gd-doped CeO2 ceramics10.1016/j.ceramint.2016.04.024 ↗
26. Effect of sintering aid (CoO) on transport properties of nanocrystalline Gd doped ceria (GDC) materials prepared by co-precipitation method10.1016/j.jallcom.2013.05.191 ↗
27. Sintering and grain growth of coo-doped ceo2 ceramics10.1016/S0955-2219(01)00240-0 ↗
28. Grain boundary conductivity of Ce0.8Ln0.2O2-δ ceramics (Ln=Y, La, Gd, Sm) with and without Co-doping10.1016/j.electacta.2006.04.032 ↗
29. Densification of Ce0.9Gd0.1O1.95 barrier layer by in-situ solid state reaction10.1016/j.jpowsour.2014.05.044 ↗
30. Densification of gadolinia-doped ceria diffusion barriers for SOECs and IT-SOFCs by a sol-gel process10.1016/j.ceramint.2015.08.143 ↗
31. Swelling and gas release in ZnO10.1111/j.1151-2916.1980.tb10214.x ↗
32. Mechanical strength and microstructure of zinc oxide varistor ceramics10.1111/j.1151-2916.2004.tb06343.x ↗
33. Carbon monoxide reduction and accompanying swelling of iron oxide compacts10.2355/isijinternational.36.164 ↗
34. Sintering of LaFeO3 ceramics10.1111/j.1151-2916.2000.tb01554.x ↗
35. Sintering behavior, microstructure, and phase composition of Sr(Fe,Co)O3-δ ceramics10.1111/j.1151-2916.2000.tb01698.x ↗
36. Sintering behaviour of La1-xSrxFeO3-δ mixed conductors10.1016/j.jeurceramsoc.2006.01.013 ↗
37. Slip casting of submicron BaTiO3 produced by low-temperature aqueous synthesis10.1016/0955-2219(96)00009-X ↗
38. Dedensification and anomalous grain growth during sintering of undoped barium titanate10.1111/j.1151-2916.1997.tb02949.x ↗
39. Sintering behaviour and microstructural evolution of agglomerated spherical particles of high-purity barium titanate10.1016/S0272-8842(02)00154-2 ↗
40. Surface decontamination treatments of undoped BaTiO3 - part II: influence on sintering10.1016/0955-2219(95)93060-G ↗
41. Characterization of BaTiO3 powder obtained by a chemical route10.1016/0955-2219(95)00021-L ↗
42. Dedensification during sintering of BaTiO3 caused by the decomposition of residual BaCO310.1111/j.1551-2916.2008.02772.x ↗
43. Effect of cobalt doping on the sintering mechanisms of the lead-free piezoceramic (Bi0.5Na0.5)TiO310.1016/j.jeurceramsoc.2013.07.021 ↗
44. Thermodynamic analysis of ZnO crystal growth from the melt10.4236/jcpt.2013.33012 ↗
45. German · 1996
46. The Cu-O (copper-oxygen) system10.1007/BF02868948 ↗
47. Sintering behavior of ceramic films constrained by a rigid substrate10.1111/j.1151-2916.1985.tb15227.x ↗
48. An initial stage model for the sintering of constrained polycrystalline thin films10.1016/0955-2219(94)90086-8 ↗
49. Kinetics of constrained-film sintering10.1111/j.1151-2916.1990.tb06502.x ↗
50. Application of the Adler-Lane-Steele model to porous La2NiO4+δ cathode for SOFC application: influence of the interface with gadolinia doped ceria10.1149/2.0891606jes ↗
51. In situ study of the sintering process of yttria stabilized zirconia by impedance spectroscopy10.1016/0167-2738(83)90120-0 ↗
52. Evolution of the electrochemical interface in high-temperature fuel cells and electrolysers10.1038/nenergy.2015.14 ↗