journal article·2017-12

How silicon electrodes can be calendered without altering their mechanical strength and cycle life

Z. Karkar, T. Jaouhari, A. Tranchot, D. Mazouzi, D. Guyomard, B. Lestriez, L. Roué

Publisher page

Abstract

Abstract The calendering of Si-based electrodes is required to obtain a substantial gain in their volumetric capacity compared to conventional graphite electrode. However, as shown in the present study performed on silicon/carbon nanoplatelets/carboxymethyl cellulose electrodes, their calendering induces a major decrease of their cycling stability. This can be attributed to the rupture of the particle-binder bridges during the calendering, lowering the mechanical strength of the electrode. It is found that these cohesive bonds can be restored through an appropriate post-calendering treatment (called maturation). It consists of storing the calendered electrode in a humid atmosphere for a few days before drying and cell assembly. From in-operando dilatometric experiments, it appears that the volumetric expansion is lower and more reversible than for a standard (not-calendered, not-matured) electrode. As a result, a remarkable improvement of the cycle life is observed. However, when cycled in Si/NMC full cell, a rapid capacity decay is observed because of the SEI instability.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Advancements in Battery Materials · Supercapacitor Materials and Fabrication · Advanced Battery Technologies Research

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (43)

Show source-provided references
1. Alloy negative electrodes for Li-ion batteries10.1021/cr500207g ↗
2. Studies of the capacity fade mechanisms of LiCoO2/Si-alloy:graphite cells10.1149/2.0191607jes ↗
3. Silicon electrode aging mechanism upon cycling in full Li-ion battery10.1002/cssc.201501628 ↗
4. Towards improving the practical energy density of Li-ion batteries: optimization and evaluation of silicon:graphite composites in full cells10.1149/2.0481701jes ↗
5. Electrolyte volume effects on electrochemical performance and solid electrolyte interphase in Si-graphite/NMC Lithium-Ion Pouch Cells10.1021/acsami.7b03617 ↗
6. Layered oxide, graphite and silicon-graphite electrodes for lithium-ion cells: effect of electrolyte composition and cycling windows10.1149/2.0131701jes ↗
7. Stabilizing dimensional changes in Si-based composite electrodes by controlling the electrode porosity: an in situ electrochemical dilatometric study10.1016/j.electacta.2011.03.071 ↗
8. Nanosized Si/cellulose fiber/carbon composites as high capacity anodes for lithium-ion batteries: a galvanostatic and dilatometric study10.1016/j.electacta.2009.06.085 ↗
9. The effect of compression on natural graphite anode performance and matrix conductivity10.1016/j.jpowsour.2004.03.052 ↗
10. Graphite electrodes with tailored porosity for rechargeable ion-transfer batteries10.1016/S0378-7753(96)02561-X ↗
11. The effect of pressure on the electroanalytical response of graphite anodes and LiCoO2 cathodes for Li-ion batteries10.1016/S0022-0728(01)00663-5 ↗
12. Calendering effects on the physical and electrochemical properties of Li[Ni1/3Mn1/3Co1/3]O2 cathode10.1016/j.jpowsour.2012.02.001 ↗
13. Effect of polymeric binder type on the thermal stability and tolerance to roll-pressing of spherical natural graphite anodes for Li-ion batteries10.1016/j.jpowsour.2013.10.076 ↗
14. Composite cathode structure/property relationships10.1016/j.jpowsour.2007.06.071 ↗
15. Ionic vs electronic power limitations and analysis of the fraction of wired grains in LiFePO4 composite electrodes10.1149/1.3432559 ↗
16. Effect of calendering LiFePO4 electrodes10.1149/2.029211jes ↗
17. Optimizing the surfactant for the aqueous processing of LiFePO4 composite electrodes10.1016/j.jpowsour.2009.11.088 ↗
18. Adhesion and fracture of interfaces between immiscible polymers: from the molecular to the continuum scale10.1007/3-540-45141-2_2 ↗
19. Effect of the length of tethered chains and the interphase structure on adhesion between glass and polyethylene10.1021/ma971469q ↗
20. A chemometric investigation of the effect of the process parameters on the performance of mixed Si/C electrodes10.1016/j.jpowsour.2005.06.006 ↗
21. Manufacturing of industry-relevant silicon negative composite electrodes for Lithium Ion-cells10.1016/j.jpowsour.2014.03.119 ↗
22. A major constituent of brown algae for use in high-capacity Li-Ion10.1126/science.1209150 ↗
23. Evaluating Si-based materials for Li-ion batteries in commercially relevant negative electrodes10.1149/2.066405jes ↗
24. High energy density calendered Si alloy/graphite anodes10.1149/2.0941410jes ↗
25. Si electrodes for Li-Ion batteries-a new way to look at an old problem10.1149/1.2817828 ↗
26. Critical roles of binders and formulation at multiscales of silicon-based composite electrodes10.1016/j.jpowsour.2015.01.140 ↗
27. A low-cost and high performance ball-milled Si-based negative electrode for high-energy Li-ion batteries10.1039/c3ee41318g ↗
28. Silicon composite electrode with high capacity and long cycle life10.1149/1.3212894 ↗
29. Impact of the slurry pH on the expansion/contraction behavior of silicon/carbon/carboxymethylcellulose electrodes for Li-ion batteries10.1149/2.1071606jes ↗
30. A film maturation process for improving the cycle life of Si-based anodes for Li-ion batteries10.1016/j.elecom.2015.10.014 ↗
31. A facile and very effective method to enhance the mechanical strength and the cyclability of Si-based electrodes for Li-ion batteries
32. Multiprobe study of the solid electrolyte interface on silicon-based electrodes in full-cell configuration10.1021/acs.chemmater.5b04461 ↗
33. Threshold-like dependence of silicon-based electrode performance on active mass loading and nature of carbon conductive additive10.1016/j.electacta.2016.08.118 ↗
34. Evolution of the 3D microstructure of a Si-Based electrode for Li-Ion batteries investigated by FIB/SEM tomography10.1149/2.0421608jes ↗
35. Tortuosity anisotropy in lithium-ion battery electrodes10.1002/aenm.201301278 ↗
36. Particle compression and conductivity in Li-ion anodes with graphite additives10.1149/1.1783909 ↗
37. Multiscale morphological characterization of process induced heterogeneities in blended positive electrodes for lithium-ion batteries10.1007/s10853-016-0374-x ↗
38. Nanosilicon-based thick Negative composite electrodes for lithium batteries with graphene as conductive additive10.1002/aenm.201300330 ↗
39. Reversible cycling of crystalline silicon powder10.1149/1.2402112 ↗
40. Very high surface capacity observed with Si negative electrodes embedded in copper foam as 3D current collector10.1002/aenm.201301718 ↗
41. The failure mechanism of nano-sized Si-based negative electrodes for lithium ion batteries10.1039/c1jm10213c ↗
42. Failure mechanisms of nano-silicon anodes upon cycling: an electrode porosity evolution model10.1039/C4CP02324B ↗
43. Alloy design for lithium-ion battery anodes10.1149/1.2752985 ↗