Finite element model approach of a cylindrical lithium ion battery cell with a focus on minimization of the computational effort and short circuit prediction
Source abstract
Abstract
Abstract In this research, a parameterized beam-element-based mechanical modeling approach for cylindrical lithium ion batteries is developed. With the goal to use the cell model in entire vehicle crash simulations, focus of development is on minimizing the computational effort whilst simultaneously obtaining accurate mechanical behavior. The cylindrical cell shape is approximated by radial beams connected to each other in circumferential and longitudinal directions. The discrete beam formulation is used to define an anisotropic material behavior. An 18650 lithium ion cell model constructed in LS-Dyna is used to show the high degree of parameterization of the approach. A criterion which considers the positive pole deformation and the radial deformation of the cell is developed for short circuit prediction during simulation. An abuse testing program, consisting of radial crush, axial crush, and penetration is performed to evaluate the mechanical properties and internal short circuit behavior of a commercially available 18650 lithium cell. Additional 3-point-bending tests are performed to verify the approach objectively. By reducing the number of strength-related elements to 1600, a fast and accurate cell model can be created. Compared to typical cell models in technical literature, simulation time of a single cell load case can be reduced by approx. 90%.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advanced Battery Technologies Research · Mechanical Engineering and Vibrations Research · Mechanical Failure Analysis and Simulation
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (34)
Show source-provided references
1. A review of hazards associated with primary lithium and lithium-ion batteries10.1016/j.psep.2011.06.022 ↗
2. Braess · 2013
3. A ‘Microscopic’ structural mechanics FE model of a lithium-ion pouch cell for quasi-static load cases10.4271/2013-01-1519 ↗
4. Modeling and short circuit detection of 18650 Li-ion cells under mechanical abuse conditions10.1016/j.jpowsour.2012.07.057 ↗
5. Method for predicting Li-Ion cell reactions due to mechanical crash loads
6. Homogenized mechanical properties for the jellyroll of cylindrical Lithium-ion cells10.1016/j.jpowsour.2013.04.135 ↗
7. Mechanical testing and macro-mechanical finite element simulation of the deformation, fracture, and short circuit initiation of cylindrical Lithium ion battery cells10.1016/j.jpowsour.2012.04.055 ↗
8. A ‘Microscopic’ structural mechanics FE model of a lithium-ion pouch cell for quasi-static load cases10.4271/2013-01-1519 ↗
9. Choi · 2013
10. Feist · 2013 · 37
11. Heindl · 2016
12. Modelling of cracks developed in lithium-ion cells under mechanical loading10.1039/C5RA17865G ↗
13. Calibration and finite element simulation of pouch lithium-ion batteries for mechanical integrity10.1016/j.jpowsour.2011.10.094 ↗
14. Characterizing and modeling mechanical properties and onset of short circuit for three types of lithium-ion pouch cells10.1016/j.jpowsour.2013.08.056 ↗
15. Computational models for simulations of lithium-ion battery cells under constrained compression tests10.1016/j.jpowsour.2013.05.022 ↗
16. Mechanical behavior of representative volume elements of lithium-ion battery cells under compressive loading conditions10.1016/j.jpowsour.2013.06.134 ↗
17. Computational models for simulation of a lithium-ion battery module specimen under punch indentation10.1016/j.jpowsour.2014.09.072 ↗
18. Failure analysis of pinch–torsion tests as a thermal runaway risk evaluation method of Li-ion cells10.1016/j.jpowsour.2014.04.040 ↗
19. Dynamic mechanical integrity of cylindrical lithium-ion battery cell upon crushing10.1016/j.engfailanal.2015.03.025 ↗
20. Structural analysis and experimental characterization of cylindrical lithium-ion battery cells subject to lateral impact10.1016/j.jpowsour.2014.08.014 ↗
21. Sahraei · 2010
22. Damage of cells and battery packs due to ground impact10.1016/j.jpowsour.2014.05.078 ↗
23. Hallquist · 2006
24. Davidsson, J., J. Carroll, Hynd, D, E., Lecuyee, E., Song, X., Trosseille, A., Eggers, C., Sunnevang, N., Praxl, P., Lemmen, B., Been, L., Martinez, Set of Injury Risk Curves for Different Sizes and Ages.
25. Marzougui · 2014
26. Franz · 2013
27. Internal configuration of prismatic lithium-ion cells at the onset of mechanically induced short circuit10.1016/j.jpowsour.2015.12.026 ↗
28. Safety focused modeling of lithium-ion batteries10.1016/j.jpowsour.2015.11.100 ↗
29. 2016
30. Underwriters Laboratory (UL), Standard for Safety - Lithium Batteries.
31. Knauder · 2012
32. L.L. Energizer Brands, Cylindrical Primary Lithium Handbook and Application Manual.
33. N. Stander, LS-OPT User's Manual: a design optimization and probabilistic analysis tool for the engineering analyst, Livermore Software Technology Corporation.
34. Evaluating the trade-off between mechanical and electrochemical performance of separators for lithium-ion batteries10.1016/j.jpowsour.2015.12.047 ↗