Sulfur loaded in micropore-rich carbon aerogel as cathode of lithium-sulfur battery with improved cyclic stability
Source abstract
Abstract
Abstract We report a novel composite of sulfur loaded in micropore-rich carbon aerogel (CA-S), as cathode of lithium-sulfur battery. Carbon aerogel (CA) is synthesized through phenol-formaldehyde reaction with a low catalyst concentration and carbonization under high temperature, and loaded with sulfur via chemical deposition and heat treatment. The physical properties of the resulting CA and the electrochemical performances of the resulting CA-S are investigated by scanning electron microscopy, thermal gravimetric analysis, Brunauer-Emmett-Teller characterization, electrochemical impedance spectroscopy, and galvanostatic discharge/charge test, with a comparison of a common carbon material, acetylene black (AB), and sulfur loaded in AB (AB-S). It is found that the CA is micropore-rich with micropore volume over 66% of total pore volume, and the CA-S exhibits significantly improved cyclic stability compared with AB-S. The improved performance of CA-S is attributed to the confinement of the micropores in CA to small sulfur allotropes and corresponding lithium sulfides.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advanced Battery Materials and Technologies · Advancements in Battery Materials · Advanced battery technologies research
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (43)
Show source-provided references
1. Building better batteries10.1038/451652a ↗
2. Porous LiMn2O4 cubes architectured with single-crystalline nanoparticles and exhibiting excellent cyclic stability and rate capability as the cathode of a lithium ion battery10.1039/c4ta01474j ↗
3. Performance enforcement of gel polymer electrolyte for lithium ion battery with co-doping silicon dioxide and zirconium dioxide nanoparticles10.1007/s11581-015-1478-z ↗
4. Preparation of co-doped spherical spinel LiMn2O4 cathode materials for Li-ion batteries10.1016/j.jpowsour.2005.02.029 ↗
5. Preparation and electrochemical properties of spherical LiFePO4 and LiFe0.9Mg0.1PO4 cathode materials for lithium rechargeable batteries10.1007/s10800-009-9931-1 ↗
6. Preparation and characterization of high-density spherical LiCoO2 cathode material for lithium ion batteries10.1016/j.jpowsour.2003.10.007 ↗
7. Rechargeable Li-O2 batteries with a covalently coupled MnCo2O4-graphene hybrid as an oxygen cathode catalyst10.1039/c2ee21746e ↗
8. Lithium/sulfur batteries with high specific energy: old challenges and new opportunities10.1039/c2nr33044j ↗
9. Polysulfide shuttle study in the Li/S battery system10.1149/1.1806394 ↗
10. A review of electrolytes for lithium-sulphur batteries10.1016/j.jpowsour.2014.01.023 ↗
11. Dense integration of graphene and sulfur through the soft approach for compact lithium/sulfur battery cathode10.1016/j.nanoen.2015.01.007 ↗
12. Sulfur loaded in curved graphene and coated with conductive polyaniline: preparation and performance as cathode of lithium-sulfur battery10.1039/C5TA02207J ↗
13. Sulfur supported by carbon nanotubes and coated with polyaniline: preparation and performance as cathode of lithium-sulfur cell10.1016/j.electacta.2015.03.070 ↗
14. Highly dispersed sulfur in multi-walled carbon nanotubes for lithium/sulfur battery10.1007/s10008-012-1959-1 ↗
15. Lithium-sulfur cell with combining carbon nanofibers-sulfur cathode and gel polymer electrolyte10.1016/j.jpowsour.2012.03.111 ↗
16. Aligned carbon nanotube/sulfur composite cathodes with high sulfur content for lithium-sulfur batteries10.1016/j.nanoen.2013.12.013 ↗
17. High-capacity micrometer-sized Li2S particles as cathode materials for advanced rechargeable lithium-ion batteries10.1021/ja3052206 ↗
18. The lithium/sulfur rechargeable cell: effects of electrode composition and solvent on cell performance10.1149/1.1503076 ↗
19. Porous carbon nanofiber-sulfur composite electrodes for lithium/sulfur cells10.1039/c1ee02256c ↗
20. Improvement of cycle property of sulfur-coated multi-walled carbon nanotubes composite cathode for lithium/sulfur batteries10.1016/j.jpowsour.2008.12.149 ↗
21. Improved cycling performances of lithium sulfur batteries with LinO3-modified electrolyte10.1016/j.jpowsour.2011.08.027 ↗
22. Improving the performance of lithium-sulfur batteries by conductive polymer coating10.1021/nn203436j ↗
23. A highly ordered nanostructured carbon-sulphur cathode for lithium-sulphur batteries10.1038/nmat2460 ↗
24. Porous hollow carbon@sulfur composites for high-power lithium–sulfur batteries10.1002/anie.201100637 ↗
25. Spherical ordered mesoporous carbon nanoparticles with high porosity for lithium-sulfur batteries10.1002/anie.201107817 ↗
26. Mesoporous carbon-sulfur composite as cathode for lithium-sulfur battery10.1007/s11581-014-1227-8 ↗
27. Porous carbon-sulfur composite cathode for lithium/sulfur cells10.1016/j.elecom.2011.12.022 ↗
28. Smaller sulfur molecules promise better lithium-sulfur batteries10.1021/ja308170k ↗
29. 3D interconnected porous carbon aerogels as sulfur immobilizers for sulfur impregnation for lithium-sulfur batteries with high rate capability and cycling stability10.1002/adfm.201303080 ↗
30. High sulfur loaded carbon aerogel cathode for lithium–sulfur batteries10.1039/C5RA01436K ↗
31. High surface area carbon aerogels for supercapacitors10.1016/S0022-3093(98)00104-5 ↗
32. Size control and characterization of spherical carbon aerogel particles from resorcinol-formaldehyde resin10.1016/j.carbon.2003.10.007 ↗
33. Sulfur encapsulated in porous carbon nanospheres and coated with conductive polyaniline as cathode of lithium–sulfur battery10.1007/s10008-015-3013-6 ↗
34. Sulfur-amine chemistry-based synthesis of multi-walled carbon nanotube-sulfur composites for high performance Li-S batteries10.1039/C3CC47223J ↗
35. Greenwood · 1997 · vol. 6 · 661
36. The viscosity of sulfur10.1021/ja01244a043 ↗
37. Rouquerol · 1999 · vol. 6 · 174
38. Electrochemistry of a non-aqueous lithium/sulfur cell10.1016/0378-7753(83)87029-3 ↗
39. Advances in Li-S batteries10.1039/b925751a ↗
40. A mathematical model for a lithium-sulfur cell10.1149/1.2937304 ↗
41. Elemental sulfur10.1021/cr60301a003 ↗
42. Study on electrode kinetics of Li+ insertion in LixMn2O4 (0 ≤ x ≤ 1) by electrochemical impedance spectroscopy10.1021/jp0732920 ↗
43. Understanding self-discharge mechanism of layered nickel cobalt manganese oxide at high potential10.1016/j.jpowsour.2015.04.032 ↗