journal article·2015-08

Sea water magnesium fuel cell power supply

Robert Hahn, Jan Mainert, Fabian Glaw, K.-D. Lang

Publisher page

Abstract

Abstract An environmentally friendly magnesium fuel cell system using seawater electrolyte and atmospheric oxygen was tested under practical considerations for use as maritime power supply. The hydrogen rate and therefore the power density of the system were increased by a factor of two by using hydrogen evolution cathodes with a gas separation membrane instead of submerged cathodes without gas separation. Commercial magnesium AZ31 rolled sheet anodes can be dissolved in seawater for hydrogen production, down to a thickness below 100 μm thickness, resulting in hydrogen generation efficiency of the anode of over 80%. A practical specific energy/energy density of the alloy of more than 1200 Wh/kg/3000 Wh/l was achieved when coupled to a fuel cell with atmospheric air breathing cathode. The performance of several AZ31 alloy anodes was tested as well as the influence of temperature, electrolyte concentration and anode – cathode separation. The excess hydrogen produced by the magnesium hydrogen evolving cell, due to the negative difference effect, is proportional to the cell current in case of the AZ31 alloys, which simplifies system control considerably. Stable long-term operation of the system was demonstrated at low pressures which can be maintained in an open-seawater-submerged hydrogen generator.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Magnesium Alloys: Properties and Applications · Hydrogen Storage and Materials · MXene and MAX Phase Materials

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (24)

Show source-provided references
1. Research progress of magnesium anodes and their applications in chemical power sources10.1016/S1003-6326(14)63367-7 ↗
2. Magnesium-air batteries: from principle to application10.1039/C3MH00059A ↗
3. High energy density rechargeable magnesium battery using earth-abundant and non-toxic elements
4. Development of seawater battery for deep-Water applications10.1016/S0378-7753(96)02483-4 ↗
5. Shinohara M., Araki E., Mochizuki M., Kanazawa T., Suyehiro K., Practical application of a sea-water battery in deep-sea basin and its performance.
6. Design of a dome-shaped aluminium water battery
7. Small fuel cell system with cartridges for controlled hydrogen generation10.1016/j.ijhydene.2014.11.080 ↗
8. Davis · Electrochem. Cells · 2007 · 30 · 1
9. Hahn · 2008 · 9
10. Li Z.Y., Wang W., Aluminum-water hydrogen storage cell, Chinese Patent 02148850.9, 2003.
11. Structural design of aluminum water hydrogen storage cell
12. Wang H.Z., Leung D.Y., Leung M.K., Ni M., A review on hydrogen production using aluminum and aluminum alloys.
13. Hahn R., Benz S., Electrochemical reactor useful for power supply of a system, comprises a galvanic cell for hydrogen production with aqueous solution as an electrolyte, and a fuel cell, DE 102009049084 B3.
14. Krebs M., Hahn R., Wagner S., Hydrogen evolution device and fuel cell system, Patent EP 2636768A1, US 20130236814 A1.
15. Microstructure effects on the electrochemical corrosion properties of Mg-4.1%Ga-2.2%Hg alloy as the anode for seawater-activated batteries10.1016/j.corsci.2011.01.040 ↗
16. Performance evaluation of Mg-AgCl batteries for under water propulsion
17. Corrosion of magnesium and its alloys10.1016/j.corsci.2009.04.025 ↗
18. Effect of manganese on discharge and corrosion performance of mangesium alloy AP65 as anode for seawater activated battery10.5006/0010-9312-68.5.388 ↗
19. Wang N.G., Wang R. C., Peng C. Q., Feng Y., Chen B., Effect of hot rolling and subsequent annealing on electrochemical discharge behaviour of AP65 magnesium alloy as anode for seawater activated battery.
20. Understanding magnesium corrosion – a framework for improved alloy performance10.1002/adem.200310405 ↗
21. The electrochemical corrosion of pure magnesium in 1N NaCl10.1016/S0010-938X(96)00172-2 ↗
22. Engineering of a single alkaline fuel cell
23. http://www.udomi.de/produkte.php?lang=de: Off Grid Power.
24. Influences of current collector foils with different opening ratios in passive polymer electrolyte membrane fuel cells10.1016/j.jpowsour.2010.08.027 ↗