journal article·2006-11

Nonlinear modeling of a SOFC stack based on a least squares support vector machine

Hai-Bo Huo, Xin-Jian Zhu, Guang-Yi Cao

Journal of Power Sources· Volume 162· Issue 2
Publisher page

Abstract

This paper reports a nonlinear modeling study of a solid oxide fuel cell (SOFC) stack using a least squares support vector machine (LS-SVM). SOFC is a nonlinear, multi-input and multi-output system that is hard to model by traditional methodologies. So far, most of the existing models are based on conversion laws, which are very useful for cell design. However, they are too complicated to be applied to control system design. To facilitate a valid control strategy design, this paper tries to avoid the internal complexities and presents a black-box model of the SOFC based on LS-SVM. The simulation tests reveal that it is feasible to establish the model using LS-SVM. At the same time, the experimental comparisons between the LS-SVM model and radial basis function neural network (RBFNN) model demonstrate that the LS-SVM is superior to the conventional RBFNN in predicting stack voltage with different fuel utilizations. Furthermore, based on this black-box LS-SVM model, valid control strategy studies such as predictive control, robust control can be developed.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Fuel Cells and Related Materials · Advancements in Solid Oxide Fuel Cells · Fault Detection and Control Systems

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (19)

Show source-provided references
1. Minh · 1995
2. Comparison of two IT DIR-SOFC models: impact of variable thermodynamic, physical, and flow properties, steady-state and dynamic analysis10.1016/j.ces.2005.01.007 ↗
3. Three-dimensional and time dependent simulation of a planar solid oxide fuel cell stack10.1016/0378-7753(93)01833-4 ↗
4. Anode-supported intermediate temperature direct internal reforming solid oxide fuel cell. I: Model-based steady-state performance10.1016/j.jpowsour.2004.06.040 ↗
5. Three-dimensional thermo-fluid electrochemical modeling of planar SOFC stacks10.1016/S0378-7753(02)00487-1 ↗
6. Artificial neural network simulator for SOFC performance prediction10.1016/S0378-7753(02)00314-2 ↗
7. Least squares support vector machine classifiers10.1023/A:1018628609742 ↗
8. Financial time series prediction using least squares support vector machines within the evidence framework10.1109/72.935093 ↗
9. Preoperative prediction of malignancy of ovarian tumors using least squares support vector machines10.1016/S0933-3657(03)00051-4 ↗
10. An application of hybrid least squares support vector machine to environmental process modeling10.1007/978-3-540-30501-9_42 ↗
11. Three-dimensional numerical simulation for various geometries of solid oxide fuel cells10.1016/0378-7753(95)02269-4 ↗
12. A novel design for solid oxide fuel cell stacks10.1016/j.ces.2003.09.005 ↗
13. Study of thermal imbalances in arrangements of solid oxide fuel cells by means of bond graph modeling
14. Design and part-load performance of a hybrid system based on a solid oxide fuel cell reactor and a microgas turbine10.1016/S0378-7753(00)00668-6 ↗
15. Nonlinear system identification using least squares support vector machines
16. An analysis of the control and operation of a solid oxide fuel-cell power plant in an isolated system10.1109/TEC.2005.847998 ↗
17. Least squares support vector machines and primal space estimation
18. C.-C. Chang, C.-J. Lin, LIBSVM: a library for support vector machines, 2001. Software available at http://www.csie.ntu.edu.tw/∼cjlin/libsvm.
19. Support vector-based battery state of charge estimator10.1016/j.jpowsour.2004.09.020 ↗