Fabrication of dye sensitized solar cell using gel polymer electrolytes consisting poly(ethylene oxide)-acetamide composite
Source abstract
Abstract
Abstract Gel polymer electrolytes (GPEs) are synthesized by incorporating different wt% (0%, 2%, 4%, 5%, 6% and 8%) of acetamide in poly (ethylene oxide) (PEO) with LiI/I2. The conformational, electrochemical, photoelectrochemical characteristics of the prepared GPEs are studied. Among the electrolytes, PEO with 5 wt% acetamide shows the highest efficiency (η = 9.01%) compared to original GPE without acetamide (5.7%) under 85 mW cm−2 illumination. The increase in open circuit voltage (Voc) is noticed for gel polymer electrolytes may be due to the reduction in the recombination reaction and increase in the electron life time upon incorporation of acetamide on the PEO. The observed increment in short circuit current density (Jsc) is attributed to the increase in the ionic conductivity and tri-iodide diffusion co-efficient, since incorporation of acetamide on the PEO increases the amorphous nature of the electrolyte.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: TiO2 Photocatalysis and Solar Cells · Advanced Photocatalysis Techniques · Conducting polymers and applications
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (34)
Show source-provided references
1. A low-cost, high-efficiency solar cell based on dye-sensitized colloidal TiO2 films10.1038/353737a0 ↗
2. Ionic Liquid–Sulfolane Composite electrolytes for high-performance and stable dye-sensitized solar cells10.1002/aenm.201301235 ↗
3. Incompletely solvated ionic liquid mixtures as electrolyte solvents for highly stable dye-sensitized solar cells10.1039/C2RA22330A ↗
4. Enhancement of monobasal solid-state dye-sensitized solar cells with polymer electrolyte assembling imidazolium iodide-functionalized silica nanoparticles10.1016/j.jpowsour.2013.09.107 ↗
5. The potential of polyurethane bio-based solid polymer electrolyte for photo-electrochemical cell application10.1016/j.ijhydene.2013.08.117 ↗
6. New fabrication process of long-life dye-sensitized solar cells by in situ gelation of quasi-solid polymer electrolytes10.1016/j.jpowsour.2013.08.103 ↗
7. Imbibition of polypyrrole into three-dimensional poly(hydroxyethyl methacrylate/glycerol) gel electrolyte for robust quasi-solid-state dye-sensitized solar cells10.1039/c3ta11166k ↗
8. Solid-state photoelectrochemical device using poly(o-methoxy aniline) as sensitizer and an ionic conductive elastomer as electrolyte10.1016/S0379-6779(99)00078-8 ↗
9. High performance quasi-solid-state dye-sensitized solar cells based on acetamide-modified polymer electrolytes10.1016/j.orgel.2012.07.038 ↗
10. Recent research progress on polymer electrolytes for dye-sensitized solar cells10.1016/j.solmat.2009.01.009 ↗
11. Stable quasi-solid-state dye-sensitized solar cells using novel low molecular mass organogelators and room-temperature molten salts10.1021/jp412717y ↗
12. Performance of dye-sensitized solar cells with (PVDF-HFP)-KI-EC-PC electrolyte and different dye materials10.1155/2011/960487 ↗
13. In situ gelation of electrolytes for highly efficient gel-state dye-sensitized solar cells10.1002/adma.201101448 ↗
14. An all-solid-state dye-sensitized solar cell-based Poly(N-alkyl-4-vinyl-pyridine iodide) electrolyte with efficiency of 5.64%10.1021/ja802158q ↗
15. The performance and stability of ambient temperature molten salts for solar cell applications10.1149/1.1837171 ↗
16. Hydrogen bonding and the inductive effect in crystalline and solution phases of Hexylamine: LiCF3SO3 and Dipropylamine:LiCF3SO3: Application to branched Poly(ethylenimine)10.1021/jp052965g ↗
17. Spectroscopic studies on the cation–anion, cation–solvent and anion–solvent interactions in the LiCF3SO3/acetamide complex system10.1016/j.saa.2004.03.035 ↗
18. FTIR characterization of PEO + LiN(CF3SO2)2 electrolytes10.1016/0022-0728(96)04536-6 ↗
19. An analysis of the crystallization behavior of Poly(ethylene Oxide)/Poly(methy1 Methacrylate) blends by spectroscopic and calorimetric techniques10.1002/pol.1984.180220715 ↗
20. Innovative high performing metal organic framework (MOF)-laden nanocomposite polymer electrolytes for all-solid-state lithium batteries10.1039/C4TA01856G ↗
21. Improved performance using a plasticized polymer electrolyte for quasi-solid state dye-sensitized solar cells10.1016/j.electacta.2012.04.061 ↗
22. Gelatin-HCl biomembranes with ionic-conducting properties10.1007/s11581-013-0935-9 ↗
23. Effect of plasticizer on structural and electrical properties of polymer nanocomposite electrolytes10.1016/S1452-3981(23)17118-5 ↗
24. Quasi-solid DSSC based on a gel-state electrolyte of PAN with 2-D graphenes incorporated10.1039/c3ta01684f ↗
25. Nanocomposite polymer electrolytes for Lithium batteries10.1038/28818 ↗
26. The influence of the metal cation and the filler on the performance of dye-sensitized solar cells using polymer-gel redox electrolytes10.1016/j.jphotochem.2007.05.003 ↗
27. Polyvinyl Butyral-based thin film polymeric electrolyte for dye-sensitized solar cell with long-term stability10.1016/S1452-3981(23)14409-9 ↗
28. Electrochemical properties of dye-sensitized solar cells fabricated with PVDF-type polymeric solid electrolytes10.1016/j.jphotochem.2003.12.021 ↗
29. Charge recombination in dye-sensitized nanocrystalline TiO2 solar cells10.1021/jp962377q ↗
30. Metal-free organic dyes for dye-sensitized solar cells: from structure: property relationships to design rules10.1002/anie.200804709 ↗
31. Electrochemical impedance spectroscopic analysis of dye-sensitized solar cells10.1021/jp052768h ↗
32. Highly efficient plastic-based quasi-solid-state dye-sensitized solar cells with light-harvesting mesoporous silica nanoparticles gel-electrolyte10.1016/j.jpowsour.2013.06.142 ↗
33. Effect of single-wall carbon nanotubes on the properties of polymeric gel electrolyte dye-sensitized solar cells10.1007/s10008-013-2302-1 ↗
34. Nanostructured TiO2 microspheres for dye-sensitized solar cells employing a solid state polymer electrolyte10.1016/j.electacta.2012.11.066 ↗