journal article·2007-11Open access

AC impedance modelling study on porous electrodes of proton exchange membrane fuel cells using an agglomerate model

Dietmar Gerteisen, Alex Hakenjos, Jürgen O. Schumacher

Journal of Power Sources· Volume 173· Issue 1

Abstract

Abstract A one-dimensional model of the PEM fuel cell cathode is developed to analyse ac impedance spectra and polarisation curves. The porous gas diffusion electrode is assumed to consist of a network of dispersed catalyst (Pt/C) forming spherically shaped agglomerated zones that are filled with electrolyte. The coupled differential equation system describes: ternary gas diffusion in the backing ( O 2 , N 2 , water vapour), Fickian diffusion and Tafel kinetics for the oxygen reduction reaction (ORR) inside the agglomerates, proton migration with ohmic losses and double-layer charging in the electrode. Measurements are made of a temperature-controlled fuel cell with a geometric area of 1.4 cm × 1.4 cm. Lateral homogeneity is ensured by using a high stoichiometry of λ min . The model predicts the behaviour of measured polarisation curves and impedance spectra. It is found that a better humidification of the electrode leads to a higher volumetric double-layer capacity. The catalyst layer resistance shows the same behaviour depending on the humidification as the membrane resistance. Model parameters, e.g. Tafel slope, ionic resistance and agglomerate radius are varied. A sensitivity analysis of the model parameters is conducted.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Fuel Cells and Related Materials · Electrocatalysts for Energy Conversion · Advancements in Solid Oxide Fuel Cells

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (19)

Show source-provided references
1. T.E. Springer, S. Gottesfeld, in: Proceedings of the Symposium on Modeling of Batteries and Fuel Cells, vols. 91–10, The Electrochemical Society, 1991, pp. 197–208.
2. Springer · J. Electrochem. Soc. · 1996 · 143 · 58710.1149/1.1836485 ↗
3. Giner · J. Electrochem. Soc. · 1969 · 116 · 112410.1149/1.2412232 ↗
4. Springer · J. Electrochem. Soc. · 1989 · 136 · 159410.1149/1.2096975 ↗
5. Ihonen · J. Electrochem. Soc. · 2002 · 149 · A44810.1149/1.1456917 ↗
6. Al-Saleh · J. Power Sources · 1995 · 55 · 3310.1016/0378-7753(94)02161-U ↗
7. Perry · J. Electrochem. Soc. · 1998 · 145 · 510.1149/1.1838202 ↗
8. Jaouen · J. Electrochem. Soc. · 2002 · 149 · A43710.1149/1.1456916 ↗
9. Jaouen · J. Electrochem. Soc. · 2003 · 150 · A169910.1149/1.1624294 ↗
10. Damjanovic · Electrochim. Acta · 1967 · 12 · 61510.1016/0013-4686(67)85030-8 ↗
11. Aricò · Electrochim. Acta · 1992 · 37 · 52310.1016/0013-4686(92)87045-2 ↗
12. Antoine · J. Electroanal. Chem. · 2001 · 499 · 8510.1016/S0022-0728(00)00492-7 ↗
13. Atkins · 2001
14. Wolfram · 1980
15. Petzold · SIAM J. Sci. Stat. Comput. · 1983 · 4 · 13610.1137/0904010 ↗
16. S. Cleghorn, J. Kolde, W. Liu, in: W. Vielstich, H. Gasteiger, A. Lamm (Eds.), Handbook of Fuel Cell—Fundamentals, Technology and Applications, vol. 3, John Wiley and Sons, 2003, pp. 566–575.
17. Li · Electrochim. Acta · 2004 · 49 · 411910.1016/j.electacta.2004.04.005 ↗
18. Neyerlin · J. Electrochem. Soc. · 2005 · 152 · A107310.1149/1.1897368 ↗
19. Eikerling · J. Electroanal. Chem. · 1999 · 475 · 10710.1016/S0022-0728(99)00335-6 ↗