journal article·2021-05

On the benefits of Cr substitution on Na4MnV(PO4)3 to improve the high voltage performance as cathode for sodium-ion batteries

P. Lavela, R. Klee, J.L. Tirado

Publisher page

Abstract

Several samples of the Na4-xMn1-xCrxV(PO4)3 (0 ≤x ≤ 1) series are prepared by a sol-gel method that favors the deposition of an in-situ carbon conductive phase to improve the electronic conductivity of these electrode materials. XRD diffraction, electron microscopy, and Raman and XPS spectroscopies are applied to determine their structural, chemical, and morphological properties. Apparent diffusion coefficients of sodium are calculated by different techniques such as cyclic voltammetry, galvanostatic intermittent titration, and impedance spectroscopy. The results reveal the benefit of the partial replacement of Mn by Cr to improve sodium diffusivity, which leads to a net gain in the reversible extraction of sodium at either low and high rates and low interface resistance values for samples with x = 0.6 and 0.8.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Advancements in Battery Materials · Advanced Battery Materials and Technologies · Transition Metal Oxide Nanomaterials

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (49)

Show source-provided references
1. State-of-the-art electrode materials for sodium-ion batteries10.3390/ma13163453 ↗
2. Electrochemistry of metal chloride cathodes in sodium ion batteries10.1149/1.2086147 ↗
3. Is lithium the new gold?10.1038/nchem.680 ↗
4. Guidelines and trends for next-generation rechargeable lithium and lithium-ion batteries10.1039/C7CS00863E ↗
5. Sodium-ion batteries: new opportunities beyond energy storage by lithium10.1016/j.jpowsour.2018.05.089 ↗
6. A cost and resource analysis of sodium-ion batteries10.1038/natrevmats.2018.13 ↗
7. High‐abundance and low‐cost metal‐based cathode materials for sodium‐ion batteries: problems, progress, and key technologies10.1002/aenm.201803609 ↗
8. Rechargeable lithium batteries for energy storage in smart grids
9. The layered oxides in lithium and sodium‐ion batteries: a solid‐state chemistry approach
10. Recent progresses and challenges of metal sulfides as advanced anode materials in rechargeable sodium-ion batteries10.1088/2515-7639/abb440 ↗
11. Prussian blue cathode materials for sodium-ion batteries and other ion batteries10.1002/aenm.201702619 ↗
12. Engineering of polyanion type cathode materials for sodium-ion batteries: toward higher energy/power density10.1002/adfm.202000473 ↗
13. Polyanionic insertion materials for sodium‐ion batteries10.1002/aenm.201703055 ↗
14. Recent progress on sodium vanadium fluorophosphates for high voltage sodium-ion battery application
15. Polyanionic (phosphates, silicates, sulfates) frameworks as electrode materials for rechargeable Li (or Na) batteries10.1021/cr3001862 ↗
16. Electrochemical studies of mixed valence NASICON10.1016/0167-2738(92)90405-E ↗
17. Electrochemical and thermal properties of NASICON structured Na3V2(PO4)3 as a sodium rechargeable battery cathode: a combined experimental and theoretical study10.1149/2.015209jes ↗
18. Performance of NASICON symmetric cell with ionic liquid electrolyte10.1149/1.3298903 ↗
19. A3V2(PO4)3 (A=Na or Li) probed by in situ X-ray absorption spectroscopy10.1016/j.jpowsour.2012.05.037 ↗
20. Progress and prospect for NASICON-type Na3V2(PO4)3 for electrochemical energy storage10.1016/j.jechem.2018.05.001 ↗
21. Polyanion sodium vanadium phosphate for next generation of sodium-ion batteries – a review10.1002/adfm.202001289 ↗
22. Na3V2(PO4)3: an advanced cathode for sodium-ion batteries10.1039/C8NR09391A ↗
23. Research progress on Na3V2(PO4)3 cathode material of sodium ion battery10.3389/fchem.2020.00635 ↗
24. NASICON-Type Na3V2(PO4)3
25. On the effect of carbon content for achieving a high performing Na3V2(PO4)3/C nanocomposite as cathode for sodium-ion batteries10.1016/j.jelechem.2016.11.064 ↗
26. Induced rate performance enhancement in off-stoichiometric Na3+3xV2-x(PO4)3 with potential applicability as the cathode for sodium-ion batteries10.1002/chem.201700716 ↗
27. Na3V2(PO4)3/C nanorods with improved electrode−electrolyte interface as cathode material for sodium-ion batteries10.1021/acsami.6b07950 ↗
28. Effect of iron substitution in the electrochemical performance of Na3V2(PO4)3 as cathode for Na-ion batteries10.1149/2.0151502jes ↗
29. Coupled X-ray diffraction and electrochemical studies of the mixed Ti/V-containing NASICON: Na2TiV(PO4)310.1039/C7TA10689K ↗
30. NaxMV(PO4)3 (M = Mn, Fe, Ni) Structure and properties for sodium extraction10.1021/acs.nanolett.6b04044 ↗
31. Engineering 3D well-interconnected Na4MnV(PO4)3 facilitates ultrafast and ultrastable sodium storage10.1021/acsami.9b12214 ↗
32. Phase transformation, charge transfer, and ionic diffusion of Na4MnV(PO4)3 in sodium-ion batteries: a combined first-principles and experimental study10.1039/D0TA05929C ↗
33. Enhancing Na+ extraction limit through high voltage activation of the NASICON-type Na4MnV(PO4)3 cathode10.1021/acsaem.8b01269 ↗
34. A NASICON-type positive electrode for Na batteries with high energy density: Na4MnV(PO4)310.1002/smtd.201800218 ↗
35. Electrochemical properties and evolution of the phase transformation behavior in the NASICON-type Na3-xMnxV2-x(PO4)3 (0≤x≤1) cathodes for Na-ion batteries10.1016/j.jpowsour.2020.228231 ↗
36. Benefits of chromium substitution in Na3V2(PO4)3 as a potential candidate for sodium-ion batteries10.1002/celc.201500052 ↗
37. Exploring highly reversible 1.5-electron reactions (V3+/V4+/V5+) in Na3VCr(PO4)3 cathode for sodium-ion batteries10.1021/acsami.7b13018 ↗
38. Preparation and electrochemical performance studies on Cr-doped Li3V2(PO4)3 as cathode materials for lithium-ion batteries10.1016/j.electacta.2009.05.041 ↗
39. The role of particle size on the electrochemical properties at 25 and at 55 °C of the LiCr0.2Ni0.4Mn1.4O4 spinel as 5V-cathode materials for lithium-ion batteries10.1016/j.electacta.2009.08.012 ↗
40. Effects of calcination temperature on electrochemical properties of cathode material Na4MnV(PO4)3/C synthesized by sol-gel method for sodium-ion batteries10.1016/j.jallcom.2020.156707 ↗
41. Raman spectrum of graphite10.1063/1.1674108 ↗
42. Raman microspectroscopy of soot and related carbonaceous materials: spectral analysis and structural information10.1016/j.carbon.2005.02.018 ↗
43. Carbon coated Na3V2(PO4)3 as novel electrode material for sodium ion batteries10.1016/j.elecom.2011.11.009 ↗
44. High-rate capability of Li3V2(PO4)3/C composites prepared via a polyvinylpyrrolidone-assisted sol–gel method10.1016/j.jpowsour.2012.02.055 ↗
45. Full activation of Mn4+/Mn3+ redox in Na4MnCr(PO4)3 as a high-voltage and high-rate cathode material for sodium-ion batteries10.1002/smll.202001524 ↗
46. Highly efficient, fast and reversible multi-electron reaction of Na3MnTi(PO4)3 cathode for sodium-ion batteries10.1016/j.ensm.2019.11.004 ↗
47. Na3V2(PO4)2F3@C dispersed within carbon nanotube frameworks as a high tap density cathode for high performance sodium-ion batteries10.1039/C8TA00990B ↗
48. Analysis of the chemical diffusion coefficient of lithium ions in Li3V2(PO4)3 cathode material10.1016/j.electacta.2009.11.096 ↗
49. Systematic investigation on determining chemical diffusion coefficients of lithium ion in Li1+xVPO4F (0≤x≤2)10.1007/s10008-014-2586-9 ↗