In situ high-resolution transmission electron microscopy synthesis observation of nanostructured carbon coated LiFePO4
Source abstract
Abstract
Abstract In situ high-resolution transmission electron microscopy (HRTEM) studies of the structural transformations that occur during the synthesis of carbon-coated LiFePO 4 (C–LiFePO 4 ) and heat treatment to elevated temperatures were conducted in two different electron microscopes. Both microscopes have sample holders that are capable of heating up to 1500 °C, with one working under high vacuum and the other capable of operating with the sample surrounded by a low gaseous environment. The C–LiFePO 4 samples were prepared using three different compositions of precursor materials with Fe(0), Fe(II) or Fe(III), a Li-containing salt and a polyethylene- block -poly(ethylene glycol)-50% ethylene oxide or lactose. The in situ TEM studies suggest that low-cost Fe(0) and a low-cost carbon-containing compound such as lactose are very attractive precursors for mass production of C–LiFePO 4 , and that 700 °C is the optimum synthesis temperature. At temperatures higher than 800 °C, LiFePO 4 has a tendency to decompose. The same in situ measurements have been made on particles without carbon coat. The results show that the homogeneous deposit of the carbon deposit at 700 °C is the result of the annealing that cures the disorder of the surface layer of bare LiFePO 4 . Electrochemical tests supported the conclusion that the C–LiFePO 4 derived from Fe(0) is the most attractive for mass production.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advancements in Battery Materials · Extraction and Separation Processes · Advanced Battery Materials and Technologies
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (32)
Show source-provided references
1. Padhi · J. Electochem. Soc. · 1997 · 144 · 118810.1149/1.1837571 ↗
2. Ravet · J. Power Sources · 2001 · 97 · 50310.1016/S0378-7753(01)00727-3 ↗
3. Dominko · J. Power Sources · 2006 · 153 · 27410.1016/j.jpowsour.2005.05.033 ↗
4. Zaghib · Chem. Mater. · 2008 · 20 · 46210.1021/cm7027993 ↗
5. Julien · J. Mat. Chem · 2011
6. Gabrisch · Electrochem. Solid-State Lett. · 2008 · 11 · A2510.1149/1.2826746 ↗
7. Teng · 2009
8. Teng · Solid State Sci. · 2010
9. Dominko · J. Electrochem. Soc. · 2005 · 152 · A60710.1149/1.1860492 ↗
10. Wang · J. Power Sources · 2005 · 140 · 12510.1016/j.jpowsour.2004.06.059 ↗
11. Chen · Electrochem. Solid-State Lett. · 2006 · 9 · A29510.1149/1.2192695 ↗
12. Chung · Nat. Phys. · 2009 · 5 · 6810.1038/nphys1148 ↗
13. Zaghib · 2009 · vol. 5 · 264
14. Julien · Ionics · 2007 · 13 · 39510.1007/s11581-007-0149-0 ↗
15. Ait-Salah · J. Electochem. Soc. · 2006 · 153 · A169210.1149/1.2213527 ↗
16. Kopec · Electrochim. Acta · 2009 · 54 · 550010.1016/j.electacta.2009.04.050 ↗
17. Ramana · J. Power Sources · 2009 · 187 · 55510.1016/j.jpowsour.2008.11.042 ↗
18. Zhang · Microsc. Today · 2006 · 14 · 1610.1017/S1551929500058600 ↗
19. Zaghib · J. Power Sources · 2010 · 195 · 828010.1016/j.jpowsour.2010.07.010 ↗
20. Ravet · Chem. Mater. · 2008 · 19 · 259510.1021/cm070485r ↗
21. Toprakci · KONA Powder Particle J. · 2010 · 28 · 5010.14356/kona.2010008 ↗
22. Wang · J. Power Sources · 2006 · 156 · 28210.1016/j.jpowsour.2006.04.046 ↗
23. Akao · Int. J. Chem. Eng. · 2010
24. Kim · J. Power Sources · 2006 · 159 · 23710.1016/j.jpowsour.2006.04.086 ↗
25. Zaghib · Ionics · 2007 · 14 · 27110.1007/s11581-007-0181-0 ↗
26. Stringfellow · 2010
27. Ait-Salah · Mater. Sci. Eng. B · 2006 · 129 · 23210.1016/j.mseb.2006.01.022 ↗
28. Ellingham · J. Soc. Chem. Ind. (London) · 1944 · 63 · 12510.1002/jctb.5000630501 ↗
29. Chen · Electrochem. Solid-Stat. Lett. · 2006 · 9 · A29510.1149/1.2192695 ↗
30. Julien · J. Appl. Phys. · 2006 · 100 · 6351110.1063/1.2337556 ↗
31. Shiratsuchi · J. Power Sources · 2007 · 173 · 97910.1016/j.jpowsour.2007.08.038 ↗
32. Zaghib · J. Power Sources · 2008 · 185 · 69810.1016/j.jpowsour.2008.08.028 ↗