Oxidation kinetics of Haynes 230 alloy in air at temperatures between 650 and 850°C
Source abstract
Abstract
Abstract Haynes 230 alloy was oxidized in air at temperatures between 650 and 850 °C. Thermogravimetry was used to measure the kinetics of oxidation. The formed oxides were identified by the thin film (small angle) X-ray diffraction technique. Cr 2 O 3 and MnCr 2 O 4 were found in the oxide scale. Multi-stage oxidation kinetics was observed, and each stage follows Wagner's parabolic law. The first slow oxidation stage corresponded to the growth of an Cr 2 O 3 layer, controlled by Cr ions diffusion through the dense Cr 2 O 3 scale. The faster second stage was a result of rapid diffusion of Mn ions passing through the established Cr 2 O 3 scale to form MnCr 2 O 4 on top of the Cr 2 O 3 layer. A duplex oxide scale is expected. The third stage, with a rate close to that of the first stage, only appeared for oxidation in the intermediate temperature range, i.e., 750–800 °C, which can be explained by the interruption of the Mn flux that forms MnCr 2 O 4 .
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: High-Temperature Coating Behaviors · Advancements in Solid Oxide Fuel Cells · Electronic and Structural Properties of Oxides
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (16)
Show source-provided references
1. Materials for lower temperature solid oxide fuel cells10.1023/A:1004881825710 ↗
2. Development of interconnect materials for solid oxide fuel cells10.1016/S0921-5093(02)00736-0 ↗
3. Metallic interconnectors for solid oxide fuel cells—a review10.3184/096034003782749071 ↗
4. Opportunity of metallic interconnects for solid oxide fuel cells: a status on contact resistance10.1016/S0025-5408(03)00076-X ↗
5. Oxidation Kinetics of some nickel-based superalloy foils and electronic resistance of the oxide scale formed in air10.1149/1.1392454 ↗
6. Oxidation Kinetics of some nickel-based superalloy foils in humidified hydrogen and electronic resistance of the oxide scale formed10.1149/1.1354611 ↗
7. Oxidation of Haynes 230 alloy in reduced temperature solid oxide fuel cell environments10.1016/j.jpowsour.2004.07.019 ↗
8. L. Jian, P. Jian, G. Xie, W. Shunxu, Heat resistant alloys as interconnect materials of reduced temperature SOFCs, J. Power Sources, in press.10.1016/j.jpowsour.2005.07.086 ↗
9. Haynes 230 Alloy Product Brochure, Haynes International.
10. Fuel Cell Handbook, The US Department of Energy, 2004.
11. Li Jian, unpublished work, 2003.
12. The oxidation of iron–chromium–manganese alloys at 900°C10.1007/BF00938460 ↗
13. Kinetics of initial oxide growth on Fe–Cr alloys and the role of vacancies in film breakdown10.1080/14786437508228936 ↗
14. Caplan · Trans. AIME · 1965 · 233 · 766
15. P. Jian, L. Jian, H. Bing, G. Xie, Oxidation kinetics and phase evolution of a Fe–16Cr alloy in simulated SOFC cathode atmosphere, J. Power Sources, in press.10.1016/j.jpowsour.2005.09.056 ↗
16. Diffusion of cations in chromia layers grown on iron-base alloys10.1007/BF00665632 ↗