Ni modified ceramic anodes for solid oxide fuel cells
Source abstract
Abstract
Abstract Ni modified Sr 2 Fe 1.5 Mo 0.5 O 6 (SFM) and La 0.75 Sr 0.25 Cr 0.5 Mn 0.5 O 3 (LSCM) anodes have been studied as anode materials for solid oxide fuel cells (SOFCs). Temperature-programmed reduction (TPR) results show that Ni promotes the oxidation of H 2 on SFM. As a result, a cell with Ni-SFM as the anode, La 0.8 Sr 0.2 Ga 0.83 Mg 0.17 O 3 (LSGM) as the electrolyte, and La 0.6 Sr 0.4 Co 0.2 Fe 0.8 O 3 (LSCF) as the cathode shows a high peak power density of 1166 mW cm −2 at 800 °C using H 2 as the fuel and ambient air as the oxidant. Ni modified SFM also shows enhanced performance in CH 4 (with 3 vol% H 2 O). Compared with SFM, Ni-SFM anode demonstrates enhanced catalytic activity, resulting in higher open-circuit voltage and lower electrode polarization resistance in CH 4 . However, due to the presence of Ni, the sulfur tolerance of these Ni-modified anodes is still low. The cell performance drops by almost 18% after the cell with Ni-SFM anode has been operating for 20 h in a fuel of H 2 with 100 ppm H 2 S at 800 °C. However, the cell performance can be fully recoverable upon removal of H 2 S from the fuel stream. Similar cell performance improvements have also been observed on cells with Ni modified LSCM anodes. The cells with the Ni-LSCM anodes have shown relatively stable performance during the short-term durability test at 800 °C in CH 4 at 800 °C.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advancements in Solid Oxide Fuel Cells · Electronic and Structural Properties of Oxides · Magnetic and transport properties of perovskites and related materials
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (20)
Show source-provided references
1. Ormerod · Chem. Soc. Rev. · 2003 · 32 · 1710.1039/b105764m ↗
2. Atkinson · Nat. Mater. · 2004 · 3 · 1710.1038/nmat1040 ↗
3. Zhan · Science · 2005 · 308 · 84410.1126/science.1109213 ↗
4. Gross · J. Mater. Chem. · 2007 · 17 · 307110.1039/b702633a ↗
5. Brett · Chem. Soc. Rev. · 2008 · 37 · 156810.1039/b612060c ↗
6. Goodenough · J. Power Sources · 2007 · 173 · 110.1016/j.jpowsour.2007.08.011 ↗
7. Gross · J. Electrochem. Soc. · 2009 · 156 · B54010.1149/1.3078406 ↗
8. Smith · Electrochem. Solid-State Lett. · 2011 · 14 · B110.1149/1.3505101 ↗
9. Edwards · Fuel Process. Technol. · 1995 · 42 · 26910.1016/0378-3820(94)00105-3 ↗
10. Wang · Energy Fuels · 1996 · 10 · 89610.1021/ef950227t ↗
11. Abbas · Int. J. Hydrogen Energy · 2010 · 35 · 116010.1016/j.ijhydene.2009.11.036 ↗
12. Liu · Electrochem. Solid-state Lett. · 2002 · 5 · A12210.1149/1.1473258 ↗
13. Zhu · J. Power Sources · 2009 · 190 · 32610.1016/j.jpowsour.2009.01.035 ↗
14. Xiao · Electrochem. Commun. · 2011 · 13 · 5710.1016/j.elecom.2010.11.012 ↗
15. Ma · Electrochem. Commun. · 2010 · 12 · 132610.1016/j.elecom.2010.07.011 ↗
16. Huang · J. Am. Ceram. Soc. · 1998 · 81 · 256510.1111/j.1151-2916.1998.tb02662.x ↗
17. Liu · Adv. Mater. · 2010 · 22 · 547810.1002/adma.201001044 ↗
18. Xiao · J. Power Sources · 2010 · 195 · 807110.1016/j.jpowsour.2010.07.036 ↗
19. Ryu · Solid State Ionics · 1999 · 125 · 35510.1016/S0167-2738(99)00196-4 ↗
20. Zhu · J. Power Sources · 2011 · 196 · 72910.1016/j.jpowsour.2010.07.055 ↗