Investigation of mechanical property of cylindrical lithium-ion batteries under dynamic loadings
Source abstract
Abstract
Abstract Understanding of mechanical property of lithium-ion batteries is the key to unlock complicated and coupled behaviors of thermal runaway, which is triggered during electric vehicle collision. In this study, mechanical behaviors of cylindrical lithium-ion batteries under dynamic loadings are investigated. Two types of 18650 lithium-ion batteries, namely LiNiCoAlO2 and LiNiCoMnO2, are chosen to perform compression tests at various dynamic loadings. Experimental results indicate that these two types of 18650 lithium-ion batteries exhibit strain rate hardening behaviors, namely their resistances to deformation enhance as loading rate increases. LiNiCoMnO2 batteries show obvious strain rate hardening behaviors at low loading rates while LiNiCoAlO2 batteries can only show strain rate hardening behaviors until the loading rate increases to a certain value. The constitutive model of the jellyroll of lithium-ion batteries is proposed to describe these mechanical behaviors under dynamic loadings and it is validated by a finite element model of lithium-ion batteries. The proposed constitutive model can be utilized to evaluate the crashworthiness of lithium-ion batteries in the case of impact accidents and provide valuable guidance for the structure design of battery packs in electric vehicles.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advanced Battery Technologies Research · Advancements in Battery Materials · Advanced Battery Materials and Technologies
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (30)
Show source-provided references
1. Frequency and time domain modelling and online state of charge monitoring for ultracapacitors10.1016/j.energy.2019.04.034 ↗
2. A fractional-order model-based battery external short circuit fault diagnosis approach for all-climate electric vehicles application10.1016/j.jclepro.2018.03.259 ↗
3. Real-time diagnosis of micro-short circuit for Li-ion batteries utilizing low-pass filters10.1016/j.energy.2018.10.160 ↗
4. A novel method on estimating the degradation and state of charge of lithium-ion batteries used for electrical vehicles10.1016/j.apenergy.2017.05.183 ↗
5. A review of lithium ion battery failure mechanisms and fire prevention strategies10.1016/j.pecs.2019.03.002 ↗
6. Characterising thermal runaway within lithium-ion cells by inducing and monitoring internal short circuits10.1039/C7EE00385D ↗
7. Investigation of internal short circuits of lithium-ion batteries under mechanical abusive conditions10.3390/en12101885 ↗
8. Improved constitutive model of the jellyroll for cylindrical lithium ion batteries considering microscopic damage10.1016/j.energy.2019.07.012 ↗
9. Failure in lithium-ion batteries under transverse indentation loading10.1016/j.jpowsour.2018.04.003 ↗
10. Comparative study of mechanical-electrical-thermal responses of pouch, cylindrical, and prismatic lithium-ion cells under mechanical abuse10.1007/s11431-017-9296-0 ↗
11. A detailed computational model for cylindrical lithium-ion batteries under mechanical loading: from cell deformation to short-circuit onset10.1016/j.jpowsour.2018.12.059 ↗
12. Investigation of the deformation mechanisms of lithium-ion battery components using in-situ micro tests10.1016/j.apenergy.2018.05.007 ↗
13. Degradation of battery separators under charge-discharge cycles10.1039/C7RA11585G ↗
14. Testing and modeling the mechanical properties of the granular materials of graphite anode10.1149/2.0141807jes ↗
15. Adhesion strength of the cathode in lithium-ion batteries under combined tension/shear loadings10.1039/C7RA12382E ↗
16. Constitutive behavior and progressive mechanical failure of electrodes in lithium-ion batteries10.1016/j.jpowsour.2017.04.103 ↗
17. Investigation of effects of design parameters on the internal short-circuit in cylindrical lithium-ion batteries10.1039/C6RA27892B ↗
18. Effects of electrolyte, loading rate and location of indentation on mechanical integrity of li-ion pouch cells10.1016/j.jpowsour.2018.06.042 ↗
19. State of charge dependent constitutive model of the jellyroll of cylindrical Lithium-ion cells10.1109/ACCESS.2018.2825466 ↗
20. State of charge dependent mechanical integrity behavior of 18650 Lithium-ion batteries10.1038/srep21829 ↗
21. State-of-Charge dependence of mechanical response of lithium-ion batteries: a result of internal stress10.1149/2.0051809jes ↗
22. Coupling effect of state-of-health and state-of-charge on the mechanical integrity of lithium-ion batteries10.1007/s11340-018-0380-9 ↗
23. Dynamic impact tests on lithium-ion cells10.1016/j.ijimpeng.2017.04.025 ↗
24. Unlocking the coupling mechanical-electrochemical behavior of lithium-ion battery upon dynamic mechanical loading10.1016/j.energy.2018.10.142 ↗
25. Dynamic mechanical integrity of cylindrical lithium-ion battery cell upon crushing10.1016/j.engfailanal.2015.03.025 ↗
26. Structural analysis and experimental characterization of cylindrical lithium-ion battery cells subject to lateral impact10.1016/j.jpowsour.2014.08.014 ↗
27. Computational model of 18650 lithium-ion battery with coupled strain rate and SOC dependencies10.1016/j.apenergy.2016.03.108 ↗
28. Dynamic impact response of lithium-ion batteries, constitutive properties and failure model10.1039/C8RA08898E ↗
29. Clay-like mechanical properties for the jellyroll of cylindrical Lithium-ion cells10.1016/j.apenergy.2017.01.062 ↗
30. Mechanical testing and macro-mechanical finite element simulation of the deformation, fracture, and short circuit initiation of cylindrical Lithium-ion battery cells10.1016/j.jpowsour.2012.04.055 ↗