Visualization of electrolyte flow in vanadium redox flow batteries using synchrotron X-ray radiography and tomography – Impact of electrolyte species and electrode compression
Source abstract
Abstract
The electrolyte distribution inside the porous electrodes of vanadium redox flow batteries is critical to the performance, as it determines the electrochemically active surface area. Herein, the influence of thermal activation, compression, and the injected electrolyte species on the pressure drop and the wetting is investigated by means of synchrotron X-ray radiation. The saturation versus the through-plane position is quantitatively displayed as a function of time to resolve the wetting process. The initial state after the imbibition is then quantitatively compared to the saturation after flow-through conditions. It was concluded that thermal activation plays a major role in the wetting, resulting in an up to six times higher saturation. Only a minor increase in saturation between the initial wetting state and after flow-through was observed. Additionally, there are only minor differences in the wetting behavior between the vanadium species in the electrolyte, the V(III) electrolyte shows the highest saturation. Increasing compression leads to a higher pressure drop and the saturation decreases only at compression ratios higher than 50%. Air pocket formation inside the liquid column was observed and the displacement and re-emergence of air pockets after flow-through is displayed.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Advanced battery technologies research · Electrocatalysts for Energy Conversion · Supercapacitor Materials and Fabrication
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (46)
Show source-provided references
1. Electrical energy storage for the grid: a battery of choices10.1126/science.1212741 ↗
2. P.A. EPRI · 2003
3. Redox flow batteries: a review10.1007/s10800-011-0348-2 ↗
4. A technology review of electrodes and reaction mechanisms in vanadium redox flow batteries10.1039/C5TA02613J ↗
5. Elucidating the nuanced effects of thermal pretreatment on carbon paper electrodes for vanadium redox flow batteries10.1021/acsami.8b15793 ↗
6. Variability within a single type of polyacrylonitrile-based graphite felt after thermal treatment. Part I: physical properties, Electrochim
7. Critical review - experimental diagnostics and material characterization techniques used on redox flow batteries10.1149/2.0601805jes ↗
8. High performance vanadium redox flow batteries with optimized electrode configuration and membrane selection10.1149/2.051208jes ↗
9. Effect of flow-field structure on discharging and charging behavior of hydrogen/bromine redox flow batteries10.1016/j.electacta.2017.01.125 ↗
10. Performance of a vanadium redox flow battery with and without flow fields10.1016/j.electacta.2014.07.059 ↗
11. 1 kW/1 kWh advanced vanadium redox flow battery utilizing mixed acid electrolytes10.1016/j.jpowsour.2013.02.045 ↗
12. UV-Vis spectrophotometry of quinone flow battery electrolyte for in situ monitoring and improved electrochemical modeling of potential and quinhydrone formation10.1039/C7CP05881K ↗
13. Neutron images of the through-plane water distribution of an operating PEM fuel cell10.1016/j.jpowsour.2007.07.036 ↗
14. Evaluation of neutron imaging for measuring phosphoric acid distribution in high temperature PEFCs10.1149/2.023403jes ↗
15. Synchrotron X-ray radiography as a highly precise and accurate method for measuring the spatial distribution of liquid water in operating PEM fuel cells10.1149/2.0041702jes ↗
16. In operando measurements of liquid water saturation distributions and effective diffusivities of polymer electrolyte membrane fuel cell gas diffusion layers10.1016/j.electacta.2016.05.180 ↗
17. Calibrating the X-ray attenuation of liquid water and correcting sample movement artefacts during in operando synchrotron X-ray radiographic imaging of polymer electrolyte membrane fuel cells10.1107/S1600577515023899 ↗
18. Investigating the effects fo gas diffusion layer substrate thickness on polymer electrolyte membrane fuel cell performance via synchrotron X-ray radiography10.1016/j.electacta.2017.03.162 ↗
19. Operando properties of gas diffusion layers: saturation and liquid permeability10.1149/2.0881702jes ↗
20. Identifying in operando changes in membrane hydration in polymer electrolyte membrane fuel cells using synchrotron X-ray radiography10.1016/j.ijhydene.2018.03.224 ↗
21. In situ compression and X-ray computed tomography of flow battery electrodes10.1016/j.jechem.2018.03.022 ↗
22. Uncovering the mechanisms of electrolyte permeation in porous electrodes for redox flow batteries through real time in situ 3D imaging10.1039/C8SE00174J ↗
23. Pore-scale study of multiphase reactive transport in fibrous electrodes of vanadium redox flow batteries10.1016/j.electacta.2017.07.086 ↗
24. Characterization of carbon felt electrodes for vanadium redox flow batteries - a pore network modeling approach10.1016/j.est.2018.11.014 ↗
25. Role of the microporous layer in the redistribution of phosphoric acid in high temperature PEM fuel cell gas diffusion electrodes10.1016/j.electacta.2016.06.121 ↗
26. Phosphoric acid invasion in high temperature PEM fuel cell gas diffusion layers10.1016/j.electacta.2017.10.054 ↗
27. Comparison of focused ion beam versus nano-scale X-ray computed tomography for resolving 3-D microstructures of porous fuel cell materials10.1016/j.jpowsour.2013.04.153 ↗
28. X-ray micro-tomography as a diagnostic tool for the electrode degradation in vanadium redox flow batteries10.1016/j.elecom.2014.09.010 ↗
29. Characterization of carbon felt electrodes for vanadium redox flow batteries: impact of treatment methods10.1149/2.0531811jes ↗
30. Clement · 2016
31. Studies on pressure losses and flow rate optimization in vanadium redox flow battery10.1016/j.jpowsour.2013.09.071 ↗
32. Critical transport issues for improving the performance of aqueous redox flow batteries10.1016/j.jpowsour.2016.11.040 ↗
33. Architecture for improved mass transport and system performance in redox flow batteries10.1016/j.jpowsour.2017.03.083 ↗
34. Performance of a low cost interdigitated flow design on a 1 kW class all vanadium mixed acid redox flow battery10.1016/j.jpowsour.2015.11.089 ↗
35. Revealing the performance enhancement of oxygenated carbonaceous materials for vanadium redox flow batteries: functional groups or specific surface area?10.1002/adsu.201700148 ↗
36. Modified carbon cloth as positive electrode with high electrochemical performance for vanadium redox flow batteries10.1016/j.jechem.2016.04.002 ↗
37. Effects of SOC-dependent electrolyte viscosity on performance of vanadium redox flow batteries10.1016/j.apenergy.2014.05.034 ↗
38. Hydrodynamic analysis of flow fields for redox flow battery applications10.1007/s10800-014-0720-0 ↗
39. Experimental validation of two-phase pressure drop multiplier as a diagnostic tool for characterizing PEM fuel cell performance10.1016/j.ijhydene.2014.08.118 ↗
40. Elucidating effects of cell architecture, electrode material, and solution composition on overpotentials in redox flow batteries10.1016/j.electacta.2017.01.056 ↗
41. Modification of graphite electrode materials for vanadium redox flow battery application - I. Thermal treatment10.1016/0013-4686(92)85064-R ↗
42. Electrical, mechanical and morphological properties of compressed carbon felt electrodes in vanadium redox flow battery10.1016/j.jpowsour.2013.06.018 ↗
43. Beamlines of the biomedical imaging and therapy facility at the Canadian light source - Part 110.1016/j.nima.2007.08.087 ↗
44. Quantitative visualization of temporal water evolution in an operating polymer electrolyte fuel cell10.1016/j.ijhydene.2010.07.173 ↗
45. Hubbell · 2004
46. Carbon felt electrodes for redox flow battery: impact of compression on transport properties10.1016/j.est.2019.100997 ↗