journal article·2018-10

Hydrophilic microporous layer coatings for polymer electrolyte membrane fuel cells operating without anode humidification

Pranay Shrestha, Rupak Banerjee, Jongmin Lee, Nan Ge, Daniel Muirhead, Hang Liu, Andrew Kai Cheung Wong, David Ouellette, Benzhong Zhao, Aimy Bazylak

Publisher page

Abstract

Abstract In this study, a hydrophilic microporous layer (MPL) coating was applied to a commercial hydrophobic bi-layer gas diffusion layer (GDL). We investigated the effect of the hydrophilic MPL coating on membrane hydration and liquid water distribution within the GDLs during fuel cell operation without anode humidification, using fuel cell performance monitoring and simultaneous synchrotron X-ray visualization. The application of the hydrophilic coating was found to enhance performance of the fuel cell. Specifically, the application of the hydrophilic MPL coating led to an increase in cell potential of up to 14% (0.07 V at 1.5 A/cm2) and a decrease in fuel cell membrane resistance. The decrease in membrane resistance was attributed to improved membrane hydration. This improvement in membrane hydration was caused by the increase in liquid water retention at the catalyst layer-MPL interfaces. At high current densities, the application of the hydrophilic MPL coating led to increased liquid water accumulation within the cathode GDL, which subsequently led to increased oxygen transport resistance. Our study demonstrates that the wettability of the GDL can be tailored to enhance fuel cell performance for a desired range of operating conditions by balancing membrane hydration and oxygen transport.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Fuel Cells and Related Materials · Electrocatalysts for Energy Conversion · Advancements in Solid Oxide Fuel Cells

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (87)

Show source-provided references
1. A review of polymer electrolyte membrane fuel cells: technology, applications, and needs on fundamental research10.1016/j.apenergy.2010.09.030 ↗
2. U. S. DRIVE · 2017 · 1
3. Influence of hydrophilic and hydrophobic triple MPL coated GDL on the oxygen transport resistance in a PEFC under high humidity conditions10.1149/06917.1313ecst ↗
4. Triple microporous layer coated gas diffusion layer for performance enhancement of polymer electrolyte fuel cells under both low and high humidity conditions10.1016/j.jpowsour.2013.10.066 ↗
5. Hydrophilic and hydrophobic double microporous layer coated gas diffusion layer for enhancing performance of polymer electrolyte fuel cells under no-humidification at the cathode10.1016/j.jpowsour.2011.10.002 ↗
6. Hydrophilic and hydrophobic double MPL coated GDL to enhance PEFC performance under low and high humidity conditions10.1149/1.3635592 ↗
7. Effect of properties of hydrophilic microporous layer (MPL) on PEFC performance10.1149/2.0371706jes ↗
8. Impact of cathode fabrication on fuel cell performance10.1149/2.064401jes ↗
9. Impact of gas diffusion layers (GDLs) on water transport in PEFCs
10. Influence of hydrophilicity in micro-porous layer for polymer electrolyte membrane fuel cells10.1016/j.electacta.2010.11.063 ↗
11. Gas diffusion through differently structured gas diffusion layers of PEM fuel cells10.1016/j.ijhydene.2007.03.041 ↗
12. Numerical investigation on double gas diffusion backing layer functionalized on water removal in a proton exchange membrane fuel cell10.1016/j.energy.2016.11.100 ↗
13. Double-layer gas diffusion media for improved water management in polymer electrolyte membrane fuel cells10.1016/j.jpowsour.2015.05.028 ↗
14. Experimental study of micro-porous layers for PEMFC with gradient hydrophobicity under various humidity conditions10.1016/j.ijhydene.2011.07.141 ↗
15. The effects of flow-field orientation on water management in PEM fuel cells with serpentine channels10.1016/j.apenergy.2017.09.044 ↗
16. Effect of the pore size variation in the substrate of the gas diffusion layer on water management and fuel cell performance10.1016/j.apenergy.2016.02.132 ↗
17. Development and impact of sandwich wettability structure for gas distribution media on PEM fuel cell performance10.1016/j.apenergy.2010.12.054 ↗
18. Experimental study on the self-humidification effect in proton exchange membrane fuel cells containing double gas diffusion backing layer10.1016/j.apenergy.2015.02.027 ↗
19. Experimental validation of two-phase pressure drop multiplier as a diagnostic tool for characterizing PEM fuel cell performance10.1016/j.ijhydene.2014.08.118 ↗
20. Improvement of water management by a microporous sublayer for PEM fuel cells10.1016/S0378-7753(02)00058-7 ↗
21. Effect of liquid water distribution in gas diffusion media with and without microporous layer on PEM fuel cell performance10.1016/j.elecom.2013.07.001 ↗
22. On the role of the microporous layer in PEMFC operation10.1016/j.elecom.2008.12.053 ↗
23. US Department of Energy · 2013
24. Lifetime behavior of a PEM fuel cell with low humidification of feed stream10.1039/B412600A ↗
25. Improvement of the proton exchange membrane fuel cell (PEMFC) performance at low-humidity conditions by exposing anode in Ultraviolet light10.1016/j.elecom.2014.03.022 ↗
26. Analysis of water film formation and low-humidity operation characteristics of a polymer electrolyte fuel cell (PEFC)10.1016/j.ijhydene.2016.10.014 ↗
27. Operation of Nafion®-based PEM fuel cells with no external humidification: influence of operating conditions and gas diffusion layers10.1016/j.jpowsour.2004.04.010 ↗
28. Study on voltage clamping and self-humidification effects of pem fuel cell system with dual recirculation based on orthogonal test method10.1016/j.ijhydene.2018.06.172 ↗
29. A gas management strategy for anode recirculation in a proton exchange membrane fuel cell10.1016/j.ijhydene.2018.01.026 ↗
30. Self-humidification of a polymer electrolyte membrane fuel cell system with cathodic exhaust gas recirculation10.1115/1.4038628 ↗
31. Gurin · 2014 · vol 672 · 643
32. Water management along the flow channels of PEM fuel cells10.1002/aic.10307 ↗
33. Active water management for PEM fuel cells10.1149/1.2766650 ↗
34. Effect of hydrophilic treatment of microporous layer on fuel cell performance10.1149/1.3484604 ↗
35. Advanced water management in PEFCs: diffusion layers with patterned wettability II. Measurement of capillary pressure characteristic with neutron and synchrotron imaging10.1149/2.0511609jes ↗
36. Effect of wettability of micro-porous layer on microscopic water transport phenomena in PEFC10.1149/06403.0527ecst ↗
37. Influence of artificially aged gas diffusion layers on the water management of polymer electrolyte membrane fuel cells analyzed with in-operando synchrotron imaging10.1016/j.energy.2016.10.061 ↗
38. Investigation of water transport dynamics in polymer electrolyte membrane fuel cells based on high porous micro porous layers10.1016/j.energy.2016.02.075 ↗
39. Investigation of water evolution and transport in fuel cells with high resolution synchrotron x-ray radiography10.1063/1.2731440 ↗
40. Influence of cracks in the microporous layer on the water distribution in a PEM fuel cell investigated by synchrotron radiography10.1016/j.elecom.2013.04.006 ↗
41. Synchrotron x-ray radiography as a highly precise and accurate method for measuring the spatial distribution of liquid water in operating PEM fuel cells10.1149/2.0041702jes ↗
42. Transient liquid water distributions in polymer electrolyte membrane fuel cell gas diffusion layers observed through in-operando synchrotron x-ray radiography10.1149/2.0991702jes ↗
43. Accounting for low-frequency synchrotron X-ray beam position fluctuations for dynamic visualizations10.1107/S0909049512039118 ↗
44. Multiwall carbon nanotube-based microporous layers for polymer electrolyte membrane fuel cells10.1149/2.0861712jes ↗
45. Synchrotron X-ray radiographic investigations of liquid water transport behavior in a PEMFC with MPL-coated GDLs10.1016/j.jpowsour.2012.11.006 ↗
46. Accelerated degradation of polymer electrolyte membrane fuel cell gas diffusion layers III. Mass transport resistance and liquid water accumulation at limiting current density with in operando synchrotron x-ray radiography10.1149/2.0091707jes ↗
47. Accelerated degradation of polymer electrolyte membrane fuel cell gas diffusion layers II. Steady state liquid water distributions with in operando synchrotron x-ray radiography10.1149/2.0081707jes ↗
48. Saturation dependent effective transport properties of PEFC gas diffusion layers10.1149/2.005209jes ↗
49. Two-phase modeling and flooding prediction of polymer electrolyte fuel cells10.1149/1.1850339 ↗
50. Fundamental models for fuel cell engineering10.1021/cr020718s ↗
51. Novel electrospun gas diffusion layers for polymer electrolyte membrane fuel cells: Part II. In operando synchrotron imaging for microscale liquid water transport characterization10.1016/j.jpowsour.2017.01.114 ↗
52. Feasibility of combining electrochemical impedance spectroscopy and synchrotron X-ray radiography for determining the influence of liquid water on polymer electrolyte membrane fuel cell performance10.1016/j.ijhydene.2015.10.008 ↗
53. In-plane liquid water distribution at the interface between the gas diffusion layer and catalyst layer in the cathode of a polymer electrolyte fuel cell with a hybrid pattern flow field10.1149/05002.0291ecst ↗
54. Visualising liquid water in PEM fuel cells using neutron imaging10.1002/fuce.200800050 ↗
55. Spatially resolved characterization of PEFCs using simultaneously neutron radiography and locally resolved impedance spectroscopy10.1016/j.elecom.2005.09.017 ↗
56. Characterization of polymer electrolyte fuel cells using AC impedance spectroscopy10.1149/1.1836485 ↗
57. Characterization of ionic conductivity profiles within proton exchange membrane fuel cell gas diffusion electrodes by impedance spectroscopy10.1149/1.1390804 ↗
58. Investigation of charge-transfer and mass-transport resistances in PEMFCs with microporous layer using electrochemical impedance spectroscopy10.1149/1.3033408 ↗
59. Effect of oxygen depletion along the air channel of a PEMFC on the Warburg diffusion impedance10.1149/1.3481560 ↗
60. Analysis of performance losses in polymer electrolyte fuel cells at high current densities by impedance spectroscopy10.1016/S0013-4686(02)00059-2 ↗
61. Yuan · 2010
62. AC impedance technique in PEM fuel cell diagnosis—a review10.1016/j.ijhydene.2007.05.036 ↗
63. Electrical test methods for on-line fuel cell ohmic resistance measurement10.1016/j.jpowsour.2006.02.086 ↗
64. Model based PEM fuel cell state-of-health monitoring via ac impedance measurements10.1016/j.jpowsour.2005.11.035 ↗
65. Wetting and absorption of water drops on Nafion films10.1021/la800799a ↗
66. Wettability of porous surfaces10.1039/tf9444000546 ↗
67. Ex-situ characterisation of gas diffusion layers for proton exchange membrane fuel cells10.1016/j.jpowsour.2012.06.099 ↗
68. Micro-computed tomography-based profilometry for characterizing the surface roughness of microporous layer-coated polymer electrolyte membrane fuel cell gas diffusion layers10.1149/2.0531608jes ↗
69. Heterogeneous porosity distributions of polymer electrolyte membrane fuel cell gas diffusion layer materials with rib-channel compression10.1016/j.ijhydene.2016.06.147 ↗
70. Water management in polymer electrolyte fuel cells through asymmetric thermal and mass transport engineering of the micro-porous layers10.1149/2.1331608jes ↗
71. Kinetics of rapid electrode reactions10.1039/df9470100011 ↗
72. Process modeling of the ohmic loss in proton exchange membrane fuel cells10.1016/j.electacta.2013.12.083 ↗
73. Effective diffusion coefficient in porous media10.1063/1.1729783 ↗
74. Beamlines of the biomedical imaging and therapy facility at the Canadian light source—Part 110.1016/j.nima.2007.08.087 ↗
75. Calibrating the X-ray attenuation of liquid water and correcting sample movement artefacts during in operando synchrotron X-ray radiographic imaging of polymer electrolyte membrane fuel cells10.1107/S1600577515023899 ↗
76. Simultaneous characterization of oxygen transport resistance and spatially resolved liquid water saturation at high-current density of polymer electrolyte membrane fuel cells with varied cathode relative humidity10.1016/j.ijhydene.2017.10.031 ↗
77. A critical review of modeling transport phenomena in polymer-electrolyte fuel cells10.1149/2.0751412jes ↗
78. Invasion percolation: a new form of percolation theory
79. Some mathematical aspects of the Kelvin equation10.1016/j.camwa.2007.03.008 ↗
80. Faghri · 2006
81. Synchrotron investigation of microporous layer thickness on liquid water distribution in a PEM fuel cell10.1149/2.0221507jes ↗
82. Liquid droplet behavior and instability in a polymer electrolyte fuel cell flow channel10.1016/j.jpowsour.2006.04.093 ↗
83. Investigating inlet condition effects on PEMFC GDL liquid water transport through pore network modeling10.1149/2.0191507jes ↗
84. A novel approach coupling neutron imaging and numerical modelling for the analysis of the impact of water on fuel cell performance10.1016/j.energy.2014.03.014 ↗
85. Balancing mass transport resistance and membrane resistance when tailoring microporous layer thickness for polymer electrolyte membrane fuel cells operating at high current densities10.1016/j.electacta.2015.11.115 ↗
86. CFD simulation of the transient gas transport in a PEM fuel cell cathode during AC impedance testing considering liquid water effects10.1016/j.energy.2018.06.039 ↗
87. Thermal stability of Nafion® in simulated fuel cell environments10.1149/1.1836669 ↗