journal article·2017-11

Analysis of structural and thermal stability in the positive electrode for sulfide-based all-solid-state lithium batteries

Hirofumi Tsukasaki, Misae Otoyama, Yota Mori, Shigeo Mori, Hideyuki Morimoto, Akitoshi Hayashi, Masahiro Tatsumisago

Publisher page

Abstract

Abstract Sulfide-based all-solid-state batteries using a non-flammable inorganic solid electrolyte are promising candidates as a next-generation power source owing to their safety and excellent charge–discharge cycle characteristics. In this study, we thus focus on the positive electrode and investigated structural stabilities of the interface between the positive electrode active material LiNi 1/3 Mn 1/3 Co 1/3 O 2 (NMC) and the 75Li 2 S·25P 2 S 5 (LPS) glass electrolyte after charge–discharge cycles via transmission electron microscopy (TEM). To evaluate the thermal stability of the fabricated all-solid-state cell, in-situ TEM observations for the positive electrode during heating are conducted. As a result, structural and morphological changes are detected in the LPS glasses. Thus, exothermal reaction present in the NMC-LPS composite positive electrode after the initial charging is attributable to the crystallization of LPS glasses. On the basis of a comparison with crystallization behavior in single LPS glasses, the origin of exothermal reaction in the NMC-LPS composites is discussed.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Advanced Battery Materials and Technologies · Advancements in Battery Materials · Advanced Battery Technologies Research

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (22)

Show source-provided references
1. All-solid-state lithium secondary batteries using the 75Li2S·25P2S5 glass and the 70Li2S·30P2S5 glass–ceramic as solid electrolytes10.1016/j.jpowsour.2013.01.090 ↗
2. Discharge performance of all-solid-state battery using a lithium superionic conductor Li10GeP2S1210.5796/electrochemistry.80.749 ↗
3. All-solid-state lithium secondary batteries using sulfide-based glass–ceramic electrolytes10.1016/j.jpowsour.2006.04.037 ↗
4. Recent progress of glass and glass-ceramics as solid electrolytes for lithium secondary batteries10.1016/j.ssi.2006.07.017 ↗
5. Minami · 2005
6. Sulfide solid electrolyte with favorable mechanical property for all-solid-state lithium battery10.1038/srep02261 ↗
7. Superionic conduction in Li2S - P2S5 - LiI - glasses10.1016/0167-2738(81)90341-6 ↗
8. Electrical properties of lithium conductive silicon sulfide glasses prepared by twin roller quenching10.1016/0167-2738(86)90139-6 ↗
9. New lithium ion conductors based on Li2S-SiS2 system10.1016/0167-2738(92)90310-L ↗
10. Structure and properties of lithium ion conducting oxysulfide glasses prepared by rapid quenching10.1016/0167-2738(96)00179-8 ↗
11. Lithium ionic conductor thio-lisicon the Li2S-GeS2-P2S5 system10.1149/1.1379028 ↗
12. Phase diagram of the Li4GeS4–Li3PS4 quasi-binary system containing the superionic conductor Li10GeP2S1210.1111/jace.13694 ↗
13. Preparation of Li2S-P2S5 amorphous solid electrolytes by mechanical milling10.1111/j.1151-2916.2001.tb00685.x ↗
14. New, highly ion-conductive crystals precipitated from Li2S–P2S5 glasses10.1002/adma.200401286 ↗
15. Preparation and ionic conductivity of Li7P3S11−z glass-ceramic electrolytes10.1016/j.jnoncrysol.2010.04.048 ↗
16. Formation of superionic crystals from mechanically milled Li2S–P2S5 glasses10.1016/S1388-2481(02)00555-6 ↗
17. High lithium ion conducting glass-ceramics in the system Li2S–P2S510.1016/j.ssi.2006.04.017 ↗
18. A lithium superionic conductor10.1038/nmat3066 ↗
19. New lithium-ion conducting crystal obtained by crystallization of the Li2S – P2S5 glasses10.1149/1.2056487 ↗
20. Direct observation of a non-crystalline state of Li2S−P2S5 solid electrolytes10.1038/s41598-017-04030-y ↗
21. Novel lithium insertion material of LiCo1/3Ni1/3Mn1/3O2 for advanced lithium-ion batteries10.1016/S0378-7753(03)00173-3 ↗
22. Electrochemical behaviors of LiCo1/3Ni1/3Mn1/3O2 in lithium batteries at elevated temperatures10.1016/j.jpowsour.2005.03.080 ↗