Novel electrospun gas diffusion layers for polymer electrolyte membrane fuel cells: Part II. In operando synchrotron imaging for microscale liquid water transport characterization
Source abstract
Abstract
Abstract This is the second paper in a two-part series in which we investigate the impact of the gas diffusion layer structure on the liquid water distribution in an operating polymer electrolyte membrane (PEM) fuel cell through the procedures of design, fabrication, and testing of novel hydrophobic electrospun gas diffusion layers (eGDLs). In this work, fibre diameters and alignment in eGDLs are precisely controlled, and concurrent synchrotron X-ray radiography and electrochemical impedance spectroscopy (EIS) are used to evaluate the influence of the controlled eGDL parameters on the liquid water distribution and on membrane liquid water content. For eGDLs with small fibre diameters (150–200 nm) and correspondingly smaller pore sizes, reduced liquid water accumulation under the flow field ribs is observed. However, more liquid water is pinned onto the eGDL – at the interface with flow field channels. Orienting fibre alignment perpendicular to the flow field channel direction leads to improved eGDL-catalyst layer contact and prevents rib-channel membrane deformation. On the other hand, eGDLs facilitate significant membrane dry-out, even under highly humidified operating conditions at high current densities.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Fuel Cells and Related Materials · Electrocatalysts for Energy Conversion · Membrane-based Ion Separation Techniques
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (48)
Show source-provided references
1. Gas diffusion layer for proton exchange membrane fuel cells—a review10.1016/j.jpowsour.2009.04.005 ↗
2. Unstructured pore network modeling with heterogeneous PEMFC GDL porosity distributions10.1149/1.3486095 ↗
3. Investigating inlet condition effects on PEMFC GDL liquid water transport through pore network modeling10.1149/2.0191507jes ↗
4. Random pore network modeling of fibrous PEMFC gas diffusion media using voronoi and delaunay tessellations10.1149/2.009308jes ↗
5. Numerical models and experiments on immiscible displacements in porous media10.1017/S0022112088000953 ↗
6. A critical review of modeling transport phenomena in polymer-electrolyte fuel cells10.1149/2.0751412jes ↗
7. In situ diagnostics for water transport in proton exchange membrane fuel cells10.1016/j.pecs.2010.06.001 ↗
8. Liquid water visualization in PEM fuel cells: a review10.1016/j.ijhydene.2009.02.084 ↗
9. Morphologically controlled fuel cell transport layers enabled via electrospun carbon nonwovens10.1016/j.jpowsour.2014.09.095 ↗
10. Synthesis of transport layers with controlled anisotropy and application thereof to study proton exchange membrane fuel cell performance10.1016/j.jpowsour.2016.02.031 ↗
11. Transport properties of electrospun fibrous membranes with controlled anisotropy10.1016/j.memsci.2014.09.017 ↗
12. Carbon nanofibers prepared via electrospinning10.1002/adma.201104940 ↗
13. Controlled formation of poly(ε-caprolactone) ultrathin electrospun nanofibers in a hydrolytic degradation-assisted process10.1016/j.eurpolymj.2013.02.038 ↗
14. Mapping the influence of solubility and dielectric constant on electrospinning polycaprolactone solutions10.1021/ma300656u ↗
15. Continuous electrospinning of aligned polymer nanofibers onto a wire drum collector10.1021/nl0486158 ↗
16. Novel electrospun gas diffusion layers for polymer electrolyte membrane fuel cells: Part I. Fabrication, morphological characterization, and in situ performance10.1016/j.jpowsour.2017.03.098 ↗
17. Quasi–in situ neutron tomography on polymer electrolyte membrane fuel cell stacks10.1063/1.2734171 ↗
18. Characterization of liquid water saturation in gas diffusion layers by X-ray tomographic microscopy10.1149/2.0401603jes ↗
19. Synchrotron X-ray radiography as a highly precise and accurate method for measuring the spatial distribution of liquid water in operating polymer electrolyte membrane fuel cells10.1149/2.0041702jes ↗
20. In situ analysis of voltage degradation in a polymer electrolyte membrane fuel cell with a dead-ended anode10.1016/j.elecom.2015.06.009 ↗
21. Observation of dynamic liquid water transport in the microporous layer and gas diffusion layer of an operating PEM fuel cell by high-resolution soft X-ray radiography10.1016/j.jpowsour.2012.11.140 ↗
22. Cross-sectional insight in the water evolution and transport in polymer electrolyte fuel cells10.1063/1.2907485 ↗
23. High-resolution in-plane investigation of the water evolution and transport in PEM fuel cells10.1016/j.jpowsour.2008.12.023 ↗
24. Eruptive water transport in PEMFC: a single-drop capillary model10.1016/j.ijhydene.2015.06.082 ↗
25. Investigation of 3D water transport paths in gas diffusion layers by combined in-situ synchrotron X-ray radiography and tomography10.1016/j.elecom.2011.06.023 ↗
26. Influence of local carbon fibre orientation on the water transport in the gas diffusion layer of polymer electrolyte membrane fuel cells10.1016/j.elecom.2014.12.013 ↗
27. Balancing mass transport resistance and membrane resistance when tailoring MPL thickness for PEM fuel cells10.1016/j.electacta.2015.11.115 ↗
28. In operando measurements of liquid water saturation distributions and effective diffusivities of polymer electrolyte membrane fuel cell gas diffusion layers10.1016/j.electacta.2016.05.180 ↗
29. Influence of cracks in the microporous layer on the water distribution in a PEM fuel cell investigated by synchrotron radiography10.1016/j.elecom.2013.04.006 ↗
30. Calibrating the X-ray attenuation of liquid water and correcting sample movement artefacts during in operando synchrotron X-ray radiographic imaging of polymer electrolyte membrane fuel cells10.1107/S1600577515023899 ↗
31. Multiphysics DC and AC models of a PEMFC for the detection of degraded cell parameters10.1016/j.ijhydene.2013.04.057 ↗
32. Measurements of air velocities in polymer electrolyte membrane fuel cell channels using electrochemical impedance spectroscopy10.1149/2.0481608jes ↗
33. Detection of cells state-of-health in PEM fuel cell stack using EIS measurements coupled with multiphysics modeling10.1002/fuce.201300209 ↗
34. A physics-based impedance model of proton exchange membrane fuel cells exhibiting low-frequency inductive loops10.1149/2.0361506jes ↗
35. Electrochemical impedance spectroscopy of fully hydrated Nafion membranes at high and low hydrogen partial pressures10.1016/j.electacta.2011.05.110 ↗
36. Impedance response of the proton exchange membrane in polymer electrolyte fuel cells10.1149/1.2929823 ↗
37. Process modeling of the ohmic loss in proton exchange membrane fuel cells10.1016/j.electacta.2013.12.083 ↗
38. Process modeling of the impedance characteristics of proton exchange membrane fuel cells10.1016/j.electacta.2016.01.128 ↗
39. Feasibility of combining electrochemical impedance spectroscopy and synchrotron X-ray radiography for determining the influence of liquid water on polymer electrolyte membrane fuel cell performance10.1016/j.ijhydene.2015.10.008 ↗
40. Beamlines of the biomedical imaging and therapy facility at the Canadian light source—Part 110.1016/j.nima.2007.08.087 ↗
41. Ex-situ characterisation of gas diffusion layers for proton exchange membrane fuel cells10.1016/j.jpowsour.2012.06.099 ↗
42. Electrochemical performances of polyacrylonitrile nanofiber-based nonwoven separator for lithium-ion battery10.1149/1.2730727 ↗
43. Synchrotron investigation of microporous layer thickness on liquid water distribution in a PEM fuel cell10.1149/2.0221507jes ↗
44. Droplet pinning by PEM fuel cell GDL surfaces10.1016/j.ijhydene.2010.06.027 ↗
45. Liquid-water interactions with gas-diffusion-layer surfaces10.1149/2.0321412jes ↗
46. Correlation between anisotropic bending stiffness of GDL and land/channel width ratio of polymer electrolyte membrane fuel cells10.1016/j.ijhydene.2012.05.120 ↗
47. Effects of anisotropic bending stiffness of gas diffusion layer on the MEA degradation of polymer electrolyte membrane fuel cells by wet/dry gas10.1016/j.ijhydene.2013.09.043 ↗
48. Polymer electrolyte fuel cell model10.1149/1.2085971 ↗