A computational model for assessing impact of interfacial morphology on polymer electrolyte fuel cell performance
Source abstract
Abstract
Abstract A two-dimensional, non-isothermal, anisotropic numerical model is developed to investigate the impact of the interfacial morphology between the micro-porous layer (MPL) and the catalyst layer (CL) on the polymer electrolyte fuel cell (PEFC) performance. The novel feature of the model is the inclusion of directly measured surface morphological information of the MPL and the CL. The interfacial morphology of the MPL and the CL was experimentally characterized and integrated into the computational framework, as a discrete interfacial layer. To estimate the impact of MPL|CL interfacial surface morphology on local ohmic, thermal and mass transport losses, two different model schemes, one with the interface layer and one with the traditionally used perfect contact are compared. The results show a ∼54 mV decrease in the performance of the cell due to the addition of interface layer at 1 A cm−2. Local voids present at the MPL|CL interface are found to increase ohmic losses by ∼37 mV. In-plane conductivity adjacent to the interface layer is determined to be the key controlling parameter which governs this additional interfacial ohmic loss. When the interfacial voids are simulated to be filled with liquid water, the overpotential on the cathode side is observed to increase by ∼25 mV. Local temperature variation of up to 1 °C is also observed at the region of contact between the MPL and the CL, but has little impact on predicted voltage.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Fuel Cells and Related Materials · Electrocatalysts for Energy Conversion · Advancements in Solid Oxide Fuel Cells
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (30)
Show source-provided references
1. Zawodzinski · J. Electrochem. Soc. · 1993 · 140 · 104110.1149/1.2056194 ↗
2. Zawodzinski · J. Electrochem. Soc. · 1993 · 140 · 198110.1149/1.2220749 ↗
3. Perry · J. Electrochem. Soc. · 2002 · 149 · S5910.1149/1.1488651 ↗
4. Prater · J. Power Sources · 1994 · 51 · 12910.1016/0378-7753(94)01934-7 ↗
5. F.E. Hizir, S.O. Ural, E.C. Kumbur, M.M. Mench, J. Power Sources, 2010, doi:10.1016/j.jpowsour.2009.11.032.10.1016/j.jpowsour.2009.11.032 ↗
6. Swamy · J. Electrochem. Soc. · 2009 · 157 · B7710.1149/1.3247585 ↗
7. Bajpai · ECS Trans. · 2009 · 25 · 310.1149/1.3210554 ↗
8. Swamy · ECS Trans. · 2009 · 25 · 1510.1149/1.3210555 ↗
9. Hartnig · Appl. Phys. Lett. · 2008 · 92 · 110.1063/1.2907485 ↗
10. Kim · J. Power Sources · 2007 · 174 · 20610.1016/j.jpowsour.2007.08.111 ↗
11. Kim · J. Power Sources · 2008 · 179 · 14010.1016/j.jpowsour.2007.12.114 ↗
12. Kim · J. Electrochem. Soc. · 2009 · 156 · B9910.1149/1.3006398 ↗
13. Hottinen · J. Power Sources · 2007 · 171 · 11310.1016/j.jpowsour.2006.10.076 ↗
14. Nitta · Fuel Cells · 2008 · 8 · 41010.1002/fuce.200700058 ↗
15. Lai · J. Power Sources · 2008 · 182 · 15310.1016/j.jpowsour.2008.03.069 ↗
16. Zhang · J. Power Sources · 2006 · 162 · 116510.1016/j.jpowsour.2006.07.070 ↗
17. Zhou · J. Power Sources · 2007 · 163 · 77710.1016/j.jpowsour.2006.09.019 ↗
18. Wu · J. Power Sources · 2006 · 189 · 106610.1016/j.jpowsour.2008.12.129 ↗
19. Mench · 2008
20. Kim · J. Membr. Sci. · 2009 · 328 · 11310.1016/j.memsci.2008.11.043 ↗
21. Poulikakos · 1994
22. Lampinen · J. Electrochem. Soc. · 1993 · 140 · 353710.1149/1.2221123 ↗
23. Khandelwal · J. Power Sources · 2006 · 161 · 110610.1016/j.jpowsour.2006.06.092 ↗
24. Motupally · J. Electrochem. Soc. · 2000 · 147 · 317110.1149/1.1393879 ↗
25. Springer · J. Electrochem. Soc. · 1993 · 140 · 351310.1149/1.2221120 ↗
26. Manahan · ECS Trans. · 2009 · 25 · 174510.1149/1.3210730 ↗
27. Chacko · J. Electrochem. Soc. · 2008 · 155 · B114510.1149/1.2975189 ↗
28. K.T. Cho, M.M. Mench, Measurements by The Pennsylvania State University, Fuel Cell Dynamics and Diagnostics Laboratory.
29. Bird · 2002
30. Bard · 2001