journal article·2004-10

Long-life, multi-tap thermal battery development

Paul Butler, Cliff Wagner, Ron Guidotti, Imelda Francis

Journal of Power Sources· Volume 136· Issue 2
Publisher page

Abstract

Abstract This paper describes an effort to develop long-life, multi-tap thermal battery technology with a minimal weight and volume. The effort has several challenging goals. Some of the development goals include an activated life of at least one hour, four voltage sections, and the ability to sustain significant pulse loads at the end of life. In order to meet these goals, advanced materials were chosen for development. The thermal battery chemistry developed consists of lithium–silicon anodes, low-melting eutectic electrolyte/separators, and cobalt disulfide cathodes. Besides evolving the electrochemistry for this battery, there are several other design challenges such as fine-tuning the heat balance so as to allow the battery to sustain the extended duration discharge. In addition, to minimize volume, the battery can is configured in a tapered shape and consequently requires a tapered Min-K™ sleeve for insulation. A new igniter design is also being used. Finally, extremely narrow voltage ranges for each of the four voltage taps have contributed to the challenges facing development engineers. This paper includes a summary of the battery design and presents test data from pre-prototype units.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Advanced Battery Materials and Technologies · Advanced battery technologies research · Advancements in Battery Materials

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (13)

Show source-provided references
1. R.D. Wehrle, R.K. Quinn, Long Life Thermal Battery Development at Sandia, vol. 9, no. 2, Sandia Technical Review, SAND78-2110, January 1979.
2. W.E. Kuper, A brief history of thermal batteries, in: Proceedings of the 36th Power Sources Conference, Cherry Hill, NJ, USA, 6–9 June 1994, pp. 300–309.
3. J.Q. Searcy, R.K. Quinn, Recent developments in Li(Si)/FeS2 thermal battery technology, in: Proceedings of the 13th International Power Sources Symposium, Brighton, UK, September 1981.
4. D. Linden, T.B. Reddy, Handbook of Batteries, third ed., McGraw-Hill, 2002 (Chapter 21).
5. R.A. Guidotti, P.J. Nigrey, F.W. Reinhardt, J.G. Odinek, Evaluation of nanoparticulate metal disulfides in thermal batteries, in: Proceedings of the 40th Power Sources Conference, Cherry Hill, NJ, 10–13 June 2002, pp. 250–253.
6. P. Butler, R. Guidotti, L. Moya, F. Reinhardt, High power thermal battery development, in: Conference Record of the 25th International Power Modulator Symposium and 2002 High Voltage Workshop, IEEE 02CH37381, Hollywood, CA, 30 June–3 July 2002, pp. 338–342.10.1109/MODSYM.2002.1189484 ↗
7. R.A. Guidotti, G.L. Scharrer, F.W. Reinhardt, Development of a high-power and high-energy thermal battery, in: Proceedings of the 39th Power Sources Conference, Cherry Hill, NJ, 12–15 June 2000, pp. 547–551.
8. Reactions of FeS2, CoS2, and NiS2 electrodes in molten LiCl–KCl electrolytes10.1149/1.2119692 ↗
9. M.D. Hilston, N.C. Otto, High power energy compression device, US Patent 5,437,940, 1st August 1995.
10. H.F. Gibbard, S.D. Cochran, Improvements in thermal batteries for high-power operation, in: Proceedings of 33rd International Power Sources Symposium, Cherry Hill, NJ, 13–16 June 1988, pp. 377–383.
11. R.A. Guidotti, Thermal batteries: a technology review and future directions, in: Proceedings of 27th International SAMPE Technical Conference, vol. 27, Albuquerque, NM, 12–19 October 1995, pp. 807–818.
12. B. Codd, Low temperature thermal battery electrolytes, in: Proceedings of 33rd International Power Sources Symposium, Cherry Hill, NJ, 13–16 June 1988, pp. 359–364.
13. R.A. Guidotti, F.W. Reinhardt, Evaluation of alternative electrolytes for use in Li(Si)/FeS2 thermal batteries, in: Proceedings of 33rd International Power Sources Symposium, Cherry Hill, NJ, 13–16 June 1988, pp. 369–376.