SnO2:F coated ferritic stainless steels for PEM fuel cell bipolar plates
Source abstract
Abstract
Ferrite stainless steels (AISI441, AISI444, and AISI446) were successfully coated with 0.6 {micro}m thick SnO{sub 2}:F by low-pressure chemical vapor deposition and investigated in simulated PEMFC environments. The results showed that a SnO{sub 2}:F coating enhanced the corrosion resistance of the alloys in PEMFC environments, though the substrate steel has a significant influence on the behavior of the coating. ICP results from the testing solutions indicated that fresh AISI441 had the highest dissolution rates in both environments, and coating with SnO2:F significantly reduced the dissolution. Coating AISI444 also improved the corrosion resistance. Coating AISI446 steel further improved the already excellent corrosion resistance of this alloy. For coated steels, both potentiostatic polarizations and ICP results showed that the PEMFC cathode environment is much more corrosive than the anode one. More dissolved metallic ions were detected in solutions for PEMFC cathode environment than those in PEMFC anode environment. Sn{sup 2+} was detected for the coated AISI441 and AISI444 steels but not for coated AISI446, indicating that the corrosion resistance of the substrate has a significant influence on the dissolution of the coating. After coating, the ICR values of the coated steels increased compared to those of the fresh steels. The SnO{sub 2}:Fmore » coating seems add an additional resistance to the native air-formed film on these stainless steels.« less
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Fuel Cells and Related Materials · Advancements in Solid Oxide Fuel Cells · Electrocatalysts for Energy Conversion
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (15)
Show source-provided references
1. Steele · Nature · 2001 · 414 · 34510.1038/35104620 ↗
2. Makkus · J. Power Sources · 2000 · 86 · 27410.1016/S0378-7753(99)00460-7 ↗
3. Davies · J. Power Sources · 2000 · 86 · 23710.1016/S0378-7753(99)00524-8 ↗
4. A.J. Appleby, S. Gamburzev, US Patent 6,828,054 (2004).
5. Wang · J. Power Sources · 2003 · 115 · 24310.1016/S0378-7753(03)00023-5 ↗
6. Wang · J. Power Sources · 2004 · 128 · 19310.1016/j.jpowsour.2003.09.075 ↗
7. B. May, D.R. Hodgson, US Patent 6,790,554 (2004).
8. Wang · J. Electrochem. Soc. · 2005 · 152 · B9910.1149/1.1854612 ↗
9. Wang · J. Power Sources · 2004 · 138 · 7910.1016/j.jpowsour.2004.06.064 ↗
10. H. Wang, J.A. Turner, X. Li, R. Bhattacharya, SnO2-coated austenite stainless steels for PEM fuel cell bipolar plates, J. Power Sources, in press.
11. Li · Appl. Surf. Sci. · 2004 · 223 · 13810.1016/S0169-4332(03)00909-7 ↗
12. Bhattacharya · Physica C · 1994 · 229 · 14510.1016/0921-4534(94)90823-0 ↗
13. Brady · Scripta Materialia · 2004 · 50 · 101710.1016/j.scriptamat.2003.12.028 ↗
14. Wang · J. Power Sources · 2004 · 138 · 8610.1016/j.jpowsour.2004.06.067 ↗
15. H. Wang, J.A. Turner, On the passivation of 349™, stainless steel in a simulated PEMFC cathode environment, in: T. Fuller, C. Bok, C. Lamy (Ed.), ECS Transactions, Proton Exchange Membrane Fuel Cells V, in honor of Supramaniam Srinivasan, vol. 1, No. 6, pp. 263–272.10.1149/1.2214497 ↗