Facile fabrication of multilayer separators for lithium-ion battery via multilayer coextrusion and thermal induced phase separation
Source abstract
Abstract
Abstract Polypropylene (PP)/polyethylene (PE) multilayer separators with cellular-like submicron pore structure for lithium-ion battery are efficiently fabricated by the combination of multilayer coextrusion (MC) and thermal induced phase separation (TIPS). The as-prepared separators, referred to as MC-TIPS PP/PE, not only show efficacious thermal shutdown function and wider shutdown temperature window, but also exhibit higher thermal stability than the commercial separator with trilayer construction of PP and PE (Celgard® 2325). The dimensional shrinkage of MC-TIPS PP/PE can be negligible until 160 °C. In addition, compared to the commercial separator, MC-TIPS PP/PE exhibits higher porosity and electrolyte uptake, leading to higher ionic conductivity and better battery performances. The above-mentioned fascinating characteristics with the convenient preparation process make MC-TIPS PP/PE a promising candidate for the application as high performance lithium-ion battery separators.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advancements in Battery Materials · Advanced Battery Materials and Technologies · Advanced Battery Technologies Research
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (65)
Show source-provided references
1. Poly (ether ether ketone) (PEEK) porous membranes with super high thermal stability and high rate capability for lithium-ion batteries10.1016/j.memsci.2017.02.027 ↗
2. Characterization of microporous separators for lithium-ion batteries10.1016/S0378-7753(98)00168-2 ↗
3. Effect of a thin ceramic-coating layer on thermal and electrochemical properties of polyethylene separator for lithium-ion batteries10.1016/j.jpowsour.2014.07.142 ↗
4. Separators for lithium-ion batteries: a review on the production processes and recent developments10.1002/ente.201402215 ↗
5. Autonomic shutdown of lithium-ion batteries using thermoresponsive microspheres10.1002/aenm.201100683 ↗
6. Closely packed SiO2 nanoparticles/poly(vinylidene fluoride-hexafluoropropylene) layers-coated polyethylene separators for lithium-ion batteries10.1016/j.jpowsour.2010.11.037 ↗
7. Enhancement of electrochemical and thermal properties of polyethylene separators coated with polyvinylidene fluoride-hexafluoropropylene co-polymer for Li-ion batteries10.1016/j.jpowsour.2011.09.086 ↗
8. Separator grafted with siloxane by electron beam irradiation for lithium secondary batteries10.1016/j.electacta.2009.02.088 ↗
9. Thin-film type Li-ion battery, using a polyethylene separator grafted with glycidyl methacrylate10.1016/j.electacta.2004.01.127 ↗
10. Lithium ion battery separators: development and performance characterization of a composite membrane10.1016/j.memsci.2012.09.027 ↗
11. The effect of silica addition on the microstructure and properties of polyethylene separators prepared by thermally induced phase separation10.1002/app.40724 ↗
12. Improving the properties of HDPE based separators for lithium ion batteries by blending block with copolymer PE-b-PEG10.1007/s10118-013-1222-y ↗
13. PVDF/PAN blend separators via thermally induced phase separation for lithium ion batteries10.1016/j.polymer.2016.11.008 ↗
14. Microporous PVDF membranes via thermally induced phase separation (TIPS) and stretching methods10.1016/j.memsci.2016.02.050 ↗
15. A processing method with high efficiency for low density polyethylene nanofibers reinforced by aligned carbon nanotubes via nanolayer coextrusion10.1016/j.polymer.2017.01.026 ↗
16. Phase separation induced ordered patterns in thin polymer blend film10.1016/j.progpolymsci.2011.09.001 ↗
17. Effects of processing parameters in thermally induced phase separation technique on porous architecture of scaffolds for bone tissue enginee10.1002/jbm.b.33101 ↗
18. Tailoring the morphology of high molecular weight PLLA scaffolds through bioglass addition10.1016/j.actbio.2010.03.032 ↗
19. Preparation of microporous silicone rubber membrane with tunable pore size via solvent evaporation-induced phase separation10.1021/am302929c ↗
20. Hierarchical three-dimensional micro/nano-architecture of polyaniline nanowires wrapped-on polyimide nanofibers for high performance lithium-ion battery separators10.1016/j.jpowsour.2015.09.037 ↗
21. Functional separator consisted of polyimide nonwoven fabrics and polyethylene coating layer for lithium-ion batteries10.1016/j.jpowsour.2015.08.008 ↗
22. Bacterial cellulose nanofibrous membrane as thermal stable separator for lithium-ion batteries10.1016/j.jpowsour.2014.12.090 ↗
23. A trilayer poly(vinylidene fluoride)/polyborate/poly(vinylidene fluoride) gel polymer electrolyte with good performance for lithium ion batteries10.1039/c3ta00167a ↗
24. A composite gel polymer electrolyte with high performance based on poly(vinylidene fluoride) and polyborate for lithium ion batteries10.1002/aenm.201300647 ↗
25. Preparation of hydrophilic polyethylene/methylcellulose blend microporous membranes for separator of lithium-ion batteries10.1016/j.memsci.2015.09.064 ↗
26. Hybrid silica membranes with a polymer nanofiber skeleton and their application as lithium-ion battery separators10.1016/j.compscitech.2017.03.022 ↗
27. High performance hybrid Al2O3/poly(vinyl alcohol-co-ethylene) nanofibrous membrane for lithium-ion battery separator10.1016/j.electacta.2015.07.104 ↗
28. Preparation of hydrophilic HDPE porous membranes via thermally induced phase separation by blending of amphiphilic PE-b-PEG copolymer10.1016/j.memsci.2010.09.007 ↗
29. Preparation of PVDF based blend microporous membranes for lithium ion batteries by thermally induced phase separation: I. Effect of PMMA on the membrane formation process and the properties10.1016/j.memsci.2013.05.028 ↗
30. Novel cellulose aerogel coated on polypropylene separators as gel polymer electrolyte with high ionic conductivity for lithium-ion batteries10.1016/j.memsci.2016.05.009 ↗
31. Effect of initial composition, phase separation temperature and polymer crystallization on the formation of microcellular structures via thermally induced phase separation10.1016/0032-3861(94)90420-0 ↗
32. PVDF porous matrix with controlled microstructure prepared by TIPS process as polymer electrolyte for lithium ion battery10.1016/j.polymer.2007.08.049 ↗
33. Battery separators10.1021/cr020738u ↗
34. A dense cellulose-based membrane as a renewable host for gel polymer electrolyte of lithium ion batteries10.1016/j.memsci.2014.10.056 ↗
35. 3D printable ceramic-polymer electrolytes for flexible high-performance Li-ion batteries with enhanced thermal stability10.1002/aenm.201602920 ↗
36. A high-voltage poly(methylethyl a-cyanoacrylate) composite polymer electrolyte for 5 V lithium batteries10.1039/C6TA00828C ↗
37. A novel poly(vinylidene fluoride-hexafluoropropylene)/poly(ethylene terephthalate) composite nonwoven separator with phase inversion-controlled microporous structure for a lithium-ion battery10.1039/c0jm01086c ↗
38. Temperature-responsive microspheres-coated separator for thermal shutdown protection of lithium ion batteries10.1039/C4RA11500G ↗
39. Preparation and performance of a novel gel polymer electrolyte based on poly(vinylidene fluoride)/graphene separator for lithium ion battery10.1016/j.electacta.2017.02.042 ↗
40. Oriented crystallization in polymers10.1080/00222346708212739 ↗
41. Thermodynamics of crystallization in high polymers. I. Crystallization induced by stretching10.1063/1.1746537 ↗
42. Effect of polymer and ceramic morphology on the material and electrochemical properties of electrospun PAN/polymer derived ceramic composite nanofiber membranes for lithium ion battery separators10.1016/j.memsci.2016.12.052 ↗
43. Polymer electrolytes based on poly(vinylidene fluoride-co-hexafluoropropylene) with crosslinked poly(ethylene glycol) for lithium batteries10.1016/j.ssi.2009.02.033 ↗
44. Gel polymer electrolytes based on active PVDF separator for lithium ion battery. I: preparation and property of PVDF/poly(dimethylsiloxane) blending membrane10.1016/j.memsci.2011.06.008 ↗
45. Preparation and Properties of Poly (vinylidene fluoride)/poly(dimethylsiloxane) graft (poly(propylene oxide)-block-poly(ethylene oxide)) blend porous separators and corresponding electrolytes10.1016/j.electacta.2013.11.076 ↗
46. High performance and biodegradable skeleton material based on soy protein isolate for gel polymer electrolyte10.1021/acssuschemeng.6b01218 ↗
47. Radiation-crosslinked nanofiber membranes with well-designed core-shell structure for high performance of gel polymer electrolytes10.1016/j.memsci.2015.05.040 ↗
48. Electrospun hydrophilic fumed silica/polyacrylonitrile nanofiber-based composite electrolyte membranes10.1016/j.electacta.2009.01.039 ↗
49. Preparation and electrochemical characterization of polymer electrolytes based on electrospun poly(vinylidene fluoride-co-hexafluoropropylene)/polyacrylonitrile blend/composite membranes for lithium batteries10.1016/j.jpowsour.2009.11.098 ↗
50. Polymethylmethacrylate/polyacrylonitrile membranes via centrifugal spinning as separator in Li-ion batteries10.3390/polym7040629 ↗
51. Study of the effect of a novel high-performance gel polymer electrolyte based on thermoplastic polyurethane/poly(vinylidene fluoride)/polystyrene and formed using an electrospinning technique10.1039/C5RA08493H ↗
52. Superior thermally stable and nonflammable porous polybenzimidazole membrane with high wettability for high-power lithium-ion batteries10.1021/acsami.6b16316 ↗
53. Closely packed x-poly(ethylene glycol diacrylate) coated polyetherimide/poly(vinylidene fluoride) fiber separators for lithium ion batteries with enhanced thermostability and improved electrolyte wettability10.1016/j.jpowsour.2016.06.050 ↗
54. Electrospun polyacrylonitrile/polyurethane composite nanofibrous separator with electrochemical performance for high power lithium ion batteries10.1016/j.matchemphys.2016.07.037 ↗
55. Fabrication of hierarchical structured SiO2/polyetherimide-polyurethane nanofibrous separators with high performance for lithium ion batteries10.1016/j.electacta.2014.12.102 ↗
56. Nanonet-structured poly(m-phenylene isophthalamide)-polyurethane membranes with enhanced thermostability and wettability for high power lithium ion batteries10.1039/C5RA09325B ↗
57. Self-assembly of PEI/SiO2 on polyethylene separators for Li-ion batteries with enhanced rate capability10.1021/am508149n ↗
58. Flexible, solid-state, ion-conducting membrane with 3D garnet nanofiber networks for lithium batteries10.1073/pnas.1600422113 ↗
59. Room-temperature miscibility gap in LixFePO410.1038/nmat1634 ↗
60. Nanoporous spherical LiFePO4 for high performance cathodes10.1039/c0ee00662a ↗
61. Enhanced high-temperature cycle life of LiFePO4-based Li-ion batteries by vinylene carbonate as electrolyte additive10.1149/1.2351954 ↗
62. Optimization of filler type within poly(vinylidene fluoride-co-trifluoroethylene) composite separator membranes for improved lithium-ion battery performance10.1016/j.compositesb.2016.04.041 ↗
63. Porous poly(vinylidene fluoride-co-hexafluoropropylene) polymer membrane with sandwich-like architecture for highly safe lithium ion batteries10.1016/j.memsci.2014.08.049 ↗
64. Nano SiO2 particle formation and deposition on polypropylene separators for lithium-ion batteries10.1016/j.jpowsour.2011.10.130 ↗
65. Excellent rate capability and cycle life of Li metal batteries with ZrO2/POSS multilayer-assembled PE separators10.1016/j.nanoen.2016.07.037 ↗