Separator electrode assembly (SEA) with 3-dimensional bioanode and removable air-cathode boosts microbial fuel cell performance
Source abstract
Abstract
Separator electrode assemblies (SEAs) were designed by associating a microbial anode with an air-cathode on each side of three different kinds of separator: plastic grid, J-cloth and baking paper. The SEA was designed to allow the air-cathode be removed and replaced without disturbing the bioanode. Power densities up to 6.4 W m−2 were produced by the Grid-SEAs (on average 5.9 ± 0.5 W m−2) while JCloth-SEAs and Paper-SEAs produced 4.8 ± 0.3 and 1.8 ± 0.1 W m−2, respectively. Power densities decreased with time mainly because of fast deterioration of the cathode kinetics. They always increased again when the air-cathodes were replaced by new ones; the Grid-SEAs were thus boosted above 4 W m−2 after 7 weeks of operation. The theoretical analysis of SEA functioning suggested that the high performance of the Grid-SEAs was due to the combination of several virtuous phenomena: the efficient pH balance thanks to free diffusion through the large-mesh grid, the likely mitigation of oxygen crossover thanks to the 3-dimensional structure of the bioanode and the possibility of overcoming cathode fouling by replacing it during MFC operation. Finally, the microbial community of all bioanodes showed stringent selection of Proteiniphilum acetatigenes in proportion with the performance.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Microbial Fuel Cells and Bioremediation · Electrochemical sensors and biosensors · Electrochemical Analysis and Applications
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (48)
Show source-provided references
1. A review of the substrates used in microbial fuel cells (MFCs) for sustainable energy production10.1016/j.biortech.2009.10.017 ↗
2. Recent advances in the use of different substrates in microbial fuel cells toward wastewater treatment and simultaneous energy recovery10.1016/j.apenergy.2016.01.056 ↗
3. Effect of buffer charge on performance of air-cathodes used in microbial fuel cells10.1016/j.electacta.2016.02.095 ↗
4. Electroactive biofilms: current status and future research needs10.1039/c1ee02511b ↗
5. Towards an engineering-oriented strategy for building microbial anodes for microbial fuel cells10.1039/c2cp42571h ↗
6. Electroanalysis of microbial anodes for bioelectrochemical systems: basics, progress and perspectives10.1039/C4CP01698J ↗
7. Recent progress and perspectives in microbial fuel cells for bioenergy generation and wastewater treatment10.1016/j.fuproc.2015.05.022 ↗
8. Assessment of microbial fuel cell configurations and power densities10.1021/acs.estlett.5b00180 ↗
9. Quantification of the internal resistance distribution of microbial fuel cells10.1021/es801229j ↗
10. Immobilization of a metal-nitrogen-carbon catalyst on activated carbon with enhanced cathode performance in microbial fuel cells10.1002/cssc.201600573 ↗
11. High power generation by a membraneless single chamber microbial fuel cell (SCMFC) using enzymatic bilirubin oxidase (BOx) air-breathing cathode10.1149/2.058310jes ↗
12. Scale-up of sediment microbial fuel cells10.1016/j.jpowsour.2014.08.070 ↗
13. Stimulating sediment bioremediation with benthic microbial fuel cells10.1016/j.biotechadv.2014.12.011 ↗
14. Microbial bioanodes with high salinity tolerance for microbial fuel cells and microbial electrolysis cells10.1016/j.elecom.2013.04.002 ↗
15. Correlation of the electrochemical kinetics of high-salinity-tolerant bioanodes with the structure and microbial composition of the biofilm10.1002/celc.201402153 ↗
16. Halotolerant extremophile bacteria from the Great Salt Lake for recycling pollutants in microbial fuel cells10.1016/j.jpowsour.2016.11.090 ↗
17. Influence of ionic conductivity in bioelectricity production from saline domestic sewage sludge in microbial fuel cells10.1016/j.biortech.2015.10.101 ↗
18. Low pH, high salinity: too much for microbial fuel cells?
19. Increased power generation in a continuous flow MFC with advective flow through the porous anode and reduced electrode spacing10.1021/es051652w ↗
20. Enhanced coulombic efficiency and power density of air-cathode microbial fuel cells with an improved cell configuration10.1016/j.jpowsour.2007.06.220 ↗
21. Minimum interspatial electrode spacing to optimize air-cathode microbial fuel cell operation with a membrane electrode assembly10.1016/j.bioelechem.2015.07.011 ↗
22. Scalable air cathode microbial fuel cells using glass fiber separators, plastic mesh supporters, and graphite fiber brush anodes10.1016/j.biortech.2010.05.090 ↗
23. Ion transport in microbial fuel cells: key roles, theory and critical review10.1016/j.apenergy.2016.09.043 ↗
24. Improved performance of CEA microbial fuel cells with increased reactor size10.1039/c2ee21964f ↗
25. A multi-electrode continuous flow microbial fuel cell with separator electrode assembly design10.1007/s00253-012-3916-4 ↗
26. Effect of separator electrode assembly (SEA) design and mode of operation on the performance of continuous tubular microbial fuel cells (MFCs)10.1016/j.ijhydene.2015.11.018 ↗
27. Performance of two different types of anodes in membrane electrode assembly microbial fuel cells for power generation from domestic wastewater10.1016/j.jpowsour.2011.06.027 ↗
28. Improving startup performance with carbon mesh anodes in separator electrode assembly microbial fuel cells10.1016/j.biortech.2013.01.036 ↗
29. Removable air-cathode to overcome cathode biofouling in microbial fuel cells10.1016/j.biortech.2016.09.095 ↗
30. Garden compost inoculum leads to microbial bioanodes with potential-independent characteristics10.1016/j.biortech.2013.01.123 ↗
31. Improvement of the anodic bioelectrocatalytic activity of mixed culture biofilms by a simple consecutive electrochemical selection procedure10.1016/j.bios.2008.08.001 ↗
32. Comparison of synthetic medium and wastewater used as dilution medium to design scalable microbial anodes: application to food waste treatment10.1016/j.biortech.2015.02.097 ↗
33. Effects of substrate and metabolite crossover on the cathodic oxygen reduction reaction in microbial fuel cells: platinum vs. iron(II) phthalocyanine based electrodes10.1016/j.elecom.2009.10.002 ↗
34. In situ investigation of cathode and local biofilm microenvironments reveals important roles of OH- and oxygen transport in microbial fuel cells10.1021/es400045s ↗
35. Importance of OH- transport from cathodes in microbial fuel cells10.1002/cssc.201100777 ↗
36. Scale-lip of membrane-free single-chamber microbial fuel cells10.1016/j.jpowsour.2007.12.120 ↗
37. Microbial communities and electrochemical performance of titanium-based anodic electrodes in a microbial fuel cell10.1128/AEM.02912-09 ↗
38. Biofuel cells select for microbial consortia that self-mediate electron transfer10.1128/AEM.70.9.5373-5382.2004 ↗
39. A novel electrochemically active and Fe(III)-reducing bacterium phylogenetically related to clostridium butyricum isolated from a microbial fuel cell10.1006/anae.2001.0399 ↗
40. Relationships between soil organic matter, nutrients, bacterial community structure, and the performance of microbial fuel cells10.1021/es2032532 ↗
41. Enhanced bioelectrochemical reduction of p-nitrophenols in the cathode of self-driven microbial fuel cells10.1039/C6RA04293G ↗
42. Proteiniphilum acetatigenes gen. nov., sp nov., from a UASB reactor treating brewery wastewater10.1099/ijs.0.63807-0 ↗
43. Ex-situ bioremediation of polycyclic aromatic hydrocarbons in sewage sludge10.1016/j.jhazmat.2008.08.067 ↗
44. Critical transport rates that limit the performance of microbial electrochemistry technologies10.1016/j.biortech.2016.04.136 ↗
45. Proton transport inside the biofilm limits electrical current generation by anode-respiring bacteria10.1002/bit.21821 ↗
46. Buffer pK(a) and transport govern the concentration overpotential in electrochemical oxygen reduction at neutral Ph10.1002/celc.201402058 ↗
47. Three-dimensional X-ray microcomputed tomography of carbonates and biofilm on operated cathode in single chamber microbial fuel cell10.1116/1.4930239 ↗
48. The power of soil microbes: sustained power production in terrestrial microbial fuel cells under various temperature regimes10.1016/j.apsoil.2016.10.001 ↗