A hybrid microbial fuel cell stack based on single and double chamber microbial fuel cells for self-sustaining pH control
Source abstract
Abstract
Abstract Proton accumulation in the anode chamber is the major problem that affects the operational stability and electricity generation performance of double chamber microbial fuel cells (MFCs). In this study, a hybrid microbial fuel cell stack (DS–DS stack) based on single (SCMFCs) and double chamber MFCs (DCMFCs) is proposed for self-sustaining pH control in the MFC stack. It is found that the aerobic microbial oxidation of acetate by the biofilm that is attached to the air cathode of SCMFCs is responsible for the self-sustaining removal of accumulated H + in the effluent of DCMFCs. Compared with the stack that solely consists of SCMFCs (SS–SS stack) or DCMFCs (DD–DD stack), the hybrid stack exhibits the highest electricity output performance and the most effective conversion of acetate into electricity at high power levels. Furthermore, the hybrid stack demonstrates the operation time of 15.7 ± 1.1 h when the operating voltage is above 0.8 V. This value is much higher than that of the DD–DD (8.5 ± 2.4 h) and SS–SS (8.1 ± 1.4 h) stacks, which suggests that the hybrid stack had a good operational stability.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Microbial Fuel Cells and Bioremediation · Electrochemical sensors and biosensors · Supercapacitor Materials and Fabrication
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (36)
Show source-provided references
1. Conversion of wastes into bioelectricity and chemicals by using microbial electrochemical technologies10.1126/science.1217412 ↗
2. Tailoring unique mesopores of hierarchically porous structures for fast direct electrochemistry in microbial fuel cells
3. Synergistic effect of titanium dioxide nanocrystal/reduced graphene oxide hybrid on enhancement of microbial electrocatalysis10.1016/j.jpowsour.2014.11.127 ↗
4. Microbial fuel cell: methodology and technology10.1021/es0605016 ↗
5. Continuous electricity generation at high voltages and currents using stacked microbial fuel cells10.1021/es0525511 ↗
6. Capturing power at higher voltages from arrays of microbial fuel cells without voltage reversal10.1039/c1ee02451e ↗
7. Pluggable microbial fuel cell stacks for septic wastewater treatment and electricity production10.1016/j.biortech.2014.12.100 ↗
8. Practical energy harvesting for microbial fuel cells: a review10.1021/es5047765 ↗
9. Self-stacked submersible microbial fuel cell (SSMFC) for improved remote power generation from lake sediments10.1016/j.bios.2012.02.059 ↗
10. Scale-up of sediment microbial fuel cells10.1016/j.jpowsour.2014.08.070 ↗
11. Alternate charging and discharging of capacitor to enhance the electron production of bioelectrochemical systems10.1021/es200759v ↗
12. A low power DC/DC booster circuit designed for microbial fuel cells10.1016/j.procbio.2011.06.003 ↗
13. Controlling for peak power extraction from microbial fuel cells can increase stack voltage and avoid cell reversal10.1016/j.jpowsour.2014.06.059 ↗
14. Control of voltage reversal in serially stacked microbial fuel cells through manipulating current: Significance of critical current density10.1016/j.jpowsour.2015.02.076 ↗
15. Scalable air cathode microbial fuel cells using glass fiber separators, plastic mesh supporters, and graphite fiber brush anodes10.1016/j.biortech.2010.05.090 ↗
16. The first self-sustainable microbial fuel cell stack10.1039/c2cp44548d ↗
17. Increasing power generation for scaling up single-chamber air cathode microbial fuel cells10.1016/j.biortech.2010.12.104 ↗
18. Catalysis kinetics and porous analysis of rolling activated carbon-PTFE air-cathode in microbial fuel cells10.1021/es303619a ↗
19. Effects of membrane cation transport on pH and microbial fuel cell performance10.1021/es060387r ↗
20. Electrocatalytic activity of anodic biofilm responses to pH changes in microbial fuel cells10.1016/j.biortech.2011.04.008 ↗
21. Percarbonate as a naturally buffering catholyte for microbial fuel cells10.1016/j.biortech.2014.09.014 ↗
22. Saline catholytes as alternatives to phosphate buffers in microbial fuel cells10.1016/j.biortech.2013.01.113 ↗
23. Operational parameters affecting the performance of a mediator-less microbial fuel cell10.1016/S0956-5663(02)00110-0 ↗
24. A multi-electrode continuous flow microbial fuel cell with separator electrode assembly design10.1007/s00253-012-3916-4 ↗
25. Sustainable power generation in microbial fuel cells using bicarbonate buffer and proton transfer mechanisms10.1021/es071739c ↗
26. Simultaneous pH self-neutralization and bioelectricity generation in a dual bioelectrode microbial fuel cell under periodic reversion of polarity10.1016/j.jpowsour.2014.06.047 ↗
27. Anolyte recirculation effects in buffered and unbuffered single-chamber air-cathode microbial fuel cells10.1016/j.biortech.2014.11.106 ↗
28. Ammonia recycling enables sustainable operation of bioelectrochemical systems10.1016/j.biortech.2013.05.108 ↗
29. Ammonium as a sustainable proton shuttle in bioelectrochemical systems10.1016/j.biortech.2011.07.100 ↗
30. Increased performance of single-chamber microbial fuel cells using an improved cathode structure10.1016/j.elecom.2006.01.010 ↗
31. Assessment of bioelectricity production in microbial fuel cells through series and parallel connections10.1016/j.enconman.2013.06.032 ↗
32. Effect of electrolyte pH on the rate of the anodic and cathodic reactions in an air-cathode microbial fuel cell10.1016/j.bioelechem.2008.07.007 ↗
33. Electrocatalytic activity of anodic biofilm responses to pH changes in microbial fuel cells10.1016/j.biortech.2011.04.008 ↗
34. The first demonstration of a microbial fuel cell as a viable power supply: Powering a meteorological buoy10.1016/j.jpowsour.2007.12.123 ↗
35. Studies on the relationship between slurry pH, volatilization processes and the influence of acidifying additives10.1007/BF01991547 ↗
36. Relationship between volatile fatty acids, total ammonia, and pH in Manure slurries10.1016/0269-7483(89)90022-0 ↗