Temperature-dependent yield stress of single crystals of non-equiatomic Cr-Mn-Fe-Co-Ni high-entropy alloys in the temperature range 10-1173 K
Source abstract
Abstract
The temperature-dependent yield strengths of [1¯23]-oriented single crystals of four quinary non-equiatomic Cr-Mn-Fe-Co-Ni high-entropy alloys (HEAs) were investigated at temperatures of 10-1173 K. They exhibit similar trends with a rapid decrease of the critical resolved shear stress (CRSS) from 10 K to 300 K, followed by a much slower rate of decrease with increasing temperature and a plateau above 873 K. The HEAs with the highest and lowest Cr contents exhibit the highest and lowest yield strengths respectively at 10 K, but almost identical yield strengths at 300 K. Thus, at cryogenic temperatures, the magnitude of the temperature dependence of yield strength is positively correlated with Cr content. All the non-equiatomic HEAs also exhibit similar dislocation structures with planar arrays of smoothly-curved dislocations without any preferred orientations. Their stacking fault energy (SFE) decreases with increasing Cr content. An empirical expression is proposed to describe the composition dependence of SFE in the Cr-Mn-Fe-Co-Ni quinary system. A new route for optimizing the alloy design of non-equiatomic Cr-Mn-Fe-Co-Ni alloys in terms of strength and ductility through the combination of mean-square atomic displacement (MSAD) and SFE is discussed based on the results obtained.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: High Entropy Alloys Studies · Additive Manufacturing Materials and Processes · High Temperature Alloys and Creep
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (74)
Show source-provided references
1. Nanostructured high-entropy alloys with multiple principal elements: novel alloy design concepts and outcomes10.1002/adem.200300567 ↗
2. Mechanical properties and stacking fault energies of NiFeCrCoMn high-entropy alloy10.1007/s11837-013-0771-4 ↗
3. Tensile properties of high- and medium-entropy alloys10.1016/j.intermet.2013.03.018 ↗
4. The influences of temperature and microstructure on the tensile properties of a CoCrFeMnNi high-entropy alloy10.1016/j.actamat.2013.06.018 ↗
5. A fracture-resistant high-entropy alloy for cryogenic applications10.1126/science.1254581 ↗
6. Temperature dependence of the mechanical properties of equiatomic solid solution alloys with face-centered cubic crystal structures10.1016/j.actamat.2014.08.026 ↗
7. Nanoscale origins of the damage tolerance of the high-entropy alloy CrMnFeCoNi10.1038/ncomms10143 ↗
8. Thermal activation mechanisms and Labusch-type strengthening analysis for a family of high-entropy and equiatomic solid-solution alloys10.1016/j.actamat.2016.08.047 ↗
9. Size effect, critical resolved shear stress, stacking fault energy, and solid solution strengthening in the CrMnFeCoNi high-entropy alloy10.1038/srep35863 ↗
10. Microstructure evolution and critical stress for twinning in the CrMnFeCoNi high-entropy alloy10.1016/j.actamat.2016.07.038 ↗
11. Reasons for the superior mechanical properties of medium-entropy CrCoNi compared to high-entropy CrMnFeCoNi10.1016/j.actamat.2017.02.036 ↗
12. Critical resolved shear stress for slip and twin nucleation in single crystalline FeNiCoCrMn high entropy alloy10.1016/j.matchar.2017.05.014 ↗
13. A critical review of high entropy alloys and related concepts10.1016/j.actamat.2016.08.081 ↗
14. Thermal activation parameters of plastic flow reveal deformation mechanisms in the CrMnFeCoNi high-entropy alloy10.1016/j.actamat.2017.10.014 ↗
15. Mechanical properties of high-entropy alloys with emphasis on face-centered cubic alloys10.1016/j.pmatsci.2018.12.003 ↗
16. High-entropy alloys10.1038/s41578-019-0121-4 ↗
17. Uniaxial mechanical properties of face-centered cubic single- and multiphase high-entropy alloys
18. Recent progress in our understanding of phase stability, atomic structures and mechanical and functional properties of high-entropy alloys
19. Modelling solid solution hardening in high entropy alloys10.1016/j.actamat.2014.11.014 ↗
20. Atomic displacement in the CrMnFeCoNi high-entropy alloy-A scaling factor to predict solid solution strengthening10.1063/1.4971371 ↗
21. Theory of strengthening in fcc high entropy alloys10.1016/j.actamat.2016.07.040 ↗
22. A general formulation for solid solution hardening effect in multicomponent alloys10.1016/j.scriptamat.2016.09.009 ↗
23. Solute strengthening in random alloys10.1016/j.actamat.2016.09.046 ↗
24. Stacking fault energies of face-centered cubic concentrated solid solution alloys10.1016/j.actamat.2017.05.001 ↗
25. Magnetically-driven phase transformation strengthening in high entropy alloys10.1038/s41467-018-03846-0 ↗
26. Correlation between lattice distortion and friction stress in Ni-based equiatomic alloys10.1016/j.intermet.2017.03.011 ↗
27. Substitutional solution hardening10.1016/0001-6160(63)90213-X ↗
28. A statistical theory of solid solution hardening10.1002/pssb.19700410221 ↗
29. Multi-component solid solution hardening - Part 1 Proposed model10.1007/BF00540987 ↗
30. Solid-solution hardening10.1016/0001-6160(78)90213-4 ↗
31. Multi-component solid solution hardening - Part 2 Agreement with experimental results10.1007/BF00540988 ↗
32. The evolution of the deformation substructure in a Ni-Co-Cr equiatomic solid solution alloy10.1016/j.actamat.2017.04.033 ↗
33. Probing deformation mechanisms of a FeCoCrNi high-entropy alloy at 293 and 77 K using in situ neutron diffraction10.1016/j.actamat.2018.05.013 ↗
34. Influence of deformation induced nanoscale twinning and FCC-HCP transformation on hardening and texture development in medium-entropy CrCoNi alloy10.1016/j.actamat.2018.07.028 ↗
35. Effects of temperature on mechanical properties and deformation mechanisms of the equiatomic CrFeNi medium-entropy alloy10.1016/j.actamat.2020.11.012 ↗
36. Stacking fault energy of face-centered-cubic high entropy alloys10.1016/j.intermet.2017.10.004 ↗
37. Effect of stacking fault energy on damage microstructure in ion-irradiated CoCrFeNiMnx concentrated solid solution alloys10.1016/j.jnucmat.2020.152642 ↗
38. Effects of Cr/Ni ratio on physical properties of Cr-Mn-Fe-Co-Ni high-entropy alloys10.1016/j.actamat.2022.117693 ↗
39. Prediction of face-centered cubic single-phase formation for non-equiatomic Cr–Mn–Fe–Co–Ni high-entropy alloys using valence electron concentration and mean-square atomic displacement10.2320/matertrans.MT-M2020144 ↗
40. Plastic deformation of single crystals of the equiatomic Cr−Mn−Fe−Co−Ni high-entropy alloy in tension and compression from 10 K to 1273 K10.1016/j.actamat.2020.10.073 ↗
41. The elastic behaviour of a crystalline aggregate10.1088/0370-1298/65/5/307 ↗
42. Simmons · 1971
43. Decomposition of the single-phase high-entropy alloy CrMnFeCoNi after prolonged anneals at intermediate temperatures10.1016/j.actamat.2016.04.005 ↗
44. Effects of annealing on hardness, yield strength and dislocation structure in single crystals of the equiatomic Cr-Mn-Fe-Co-Ni high entropy alloy10.1016/j.scriptamat.2020.09.039 ↗
45. Relations between the elastic moduli and the plastic properties of polycrystalline pure metals10.1080/14786440808520496 ↗
46. Shear modulus
47. Theoretical predictions of structure and related properties of intermetallics10.1179/mst.1992.8.4.345 ↗
48. Extra-electron induced covalent strengthening and generalization of intrinsic ductile-to-brittle criterion10.1038/srep00718 ↗
49. Comparison of cryogenic deformation of the concentrated solid solutions CoCrFeMnNi, CoCrNi and CoNi10.1016/j.msea.2020.139290 ↗
50. Tensile and compressive plastic deformation behavior of medium-entropy Cr-Co-Ni single crystals from cryogenic to elevated temperatures10.1016/j.ijplas.2021.103144 ↗
51. The weak beam technique as applied to the determination of the stacking-fault energy of copper10.1080/14786437108217418 ↗
52. The measurement of stacking-fault energies of pure face-centred cubic metals10.1080/14786437108217419 ↗
53. Atomic-scale characterization and modeling of 60°dislocations in a high-entropy alloy10.1016/j.actamat.2016.03.045 ↗
54. Tunable stacking fault energies by tailoring local chemical order in CrCoNi medium-entropy alloys10.1073/pnas.1808660115 ↗
55. Strengthening in multi-principal element alloys with local-chemical-order roughened dislocation pathways
56. Stress equivalence of solution hardening10.1016/0036-9748(72)90052-X ↗
57. Thermodynamics and kinetics of slip
58. Precision measurements of critical resolved shear stress in CuMn alloys10.1016/0001-6160(86)90216-6 ↗
59. Quantitative analysis of solution hardening in selected copper alloys10.1016/0001-6160(87)90267-7 ↗
60. Combining experiments and modeling to explore the solid solution strengthening of high and medium entropy alloys10.1016/j.actamat.2019.06.050 ↗
61. Temperature dependencies of the elastic moduli and thermal expansion coefficient of an equiatomic, single-phase CoCrFeMnNi high-entropy alloy10.1016/j.jallcom.2014.11.061 ↗
62. High throughput discovery and design of strong multicomponent metallic solid solutions10.1038/s41598-018-26830-6 ↗
63. Correlation of microdistortions with misfit volumes in High Entropy Alloys10.1016/j.scriptamat.2019.04.012 ↗
64. Rate processes in plastic deformation of materials
65. Cooperative effects in alloy hardening10.1007/BF01597457 ↗
66. Review Solid-solution hardening10.1007/BF00356192 ↗
67. Investigation of the activation-parameters of low-temperature slip in cubic metals10.1023/A:1021126232107 ↗
68. The dependence of cross-slip on stacking-fault energy in face-centred cubic metals and alloys10.1080/14786436208213168 ↗
69. Deformation twinning
70. Effect of valence electron concentration on stability of fcc or bcc phase in high entropy alloys10.1063/1.3587228 ↗
71. Twinning-induced plasticity (TWIP) steels10.1016/j.actamat.2017.06.046 ↗
72. The influence of manganese content on the stacking fault and austenite/ε-martensite interfacial energies in Fe-Mn-(Al-Si) steels investigated by experiment and theory10.1016/j.actamat.2014.01.001 ↗
73. Novel Co-rich high entropy alloys with superior tensile properties10.1080/21663831.2018.1553803 ↗
74. Premature fracture mechanism in an Fe-Mn-C austenitic steel10.1007/s11661-012-1220-7 ↗