New electroplated aluminum bipolar plate for PEM fuel cell
Source abstract
Abstract
Abstract Further improvement in the performance of the polymer electrolyte membrane fuel cells as a power source for automotive applications may be achieved by the use of a new material in the manufacture of the bipolar plate. Several nickel alloys were applied on the aluminum substrate, the use of aluminum as a bipolar plate instead of graphite is to reduce the bipolar plate cost and weight and the ease of machining. The electroplated nickel alloys on aluminum substrate produced a new metallic bipolar plate for PEM fuel cell with a higher efficiency and longer lifetime than the graphite bipolar plate due to its higher electrical conductivity and its lower corrosion rate. Different pretreatment methods were tested; the optimum method for pretreatment consists of dipping the specimen in a 12.5% NaOH for 3 min followed by electroless zinc plating for 2 min, then the specimen is dipped quickly in the electroplating bath after rinsing with distilled water. The produced electroplate was tested with different measurement techniques, chosen based on the requirement for a PEM fuel cell bipolar plate, including X-ray diffraction, EDAX, SEM, corrosion resistance, thickness measurement, microhardness, and electrical conductivity.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Fuel Cells and Related Materials · Corrosion Behavior and Inhibition · Advanced Battery Technologies Research
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (12)
Show source-provided references
1. R.J. Lawrance, Low cost bipolar current collector–separator for electrochemical cells, US Patent 4,214,969 (July 29, 1980).
2. L. Singheiser, H.H. Bolt, H. Kobs, Bipolar plate with non-metallic coating for fuel cell, German Patent 19805683 (August 19, 1999).
3. Light weigh and corrosion resistant metal bipolar plates for PEM fuel cells
4. T. Kaji, T. Takikawa, Aluminum separator and its manufacture for fuel cell, Japanese Patent 135325 (May 18, 2001).
5. Stainless steel as bipolar plate material for solid polymer fuel cells10.1016/S0378-7753(99)00524-8 ↗
6. New light weigh bipolar plate system for PEMFC10.1016/S0378-7753(01)00568-7 ↗
7. Kenneth · 1955
8. Comparison of electrochemical and surface characterization methods for investigation of corrosion of bipolar plate materials in molten carbonate fuel cell10.1016/S0010-938X(98)00200-5 ↗
9. Electroless nickel plating
10. Design and testing criteria for bipolar plate materials for PEM fuel cell applications10.1557/PROC-393-151 ↗
11. L. Yang, M. Wen-jin, S. Swathy, H.S. Joel, D.G. Lynn, Corrosion resistant PEM fuel cell, US Patent RE37284 (July 17, 2001).
12. New electroless nickel-alloys coated aluminum bipolar plate for PEM fuel cell