The modeling of a standalone solid-oxide fuel cell auxiliary power unit
Source abstract
Abstract
In this research, a Simulink model of a standalone vehicular solid-oxide fuel cell (SOFC) auxiliary power unit (APU) is developed. The SOFC APU model consists of three major components: a controller model; a power electronics system model; and an SOFC plant model, including an SOFC stack module, two heat exchanger modules, and a combustor module. This paper discusses the development of the nonlinear dynamic models for the SOFC stacks, the heat exchangers and the combustors. When coupling with a controller model and a power electronic circuit model, the developed SOFC plant model is able to model the thermal dynamics and the electrochemical dynamics inside the SOFC APU components, as well as the transient responses to the electric loading changes. It has been shown that having such a model for the SOFC APU will help design engineers to adjust design parameters to optimize the performance. The modeling results of the SOFC APU heat-up stage and the output voltage response to a sudden load change are presented in this paper. The fuel flow regulation based on fuel utilization is also briefly discussed.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Fuel Cells and Related Materials · Advancements in Solid Oxide Fuel Cells · Electrocatalysts for Energy Conversion
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (19)
Show source-provided references
1. Three-dimensional thermo-fluid electrochemical modeling of planar SOFC stacks10.1016/S0378-7753(02)00487-1 ↗
2. Simulation and analysis of transient fuel cell system performance based on a dynamic reactant flow model
3. Development and application of a generalized steady-state electrochemical model for a PEM fuel cell10.1016/S0378-7753(99)00484-X ↗
4. Response of a solid oxide fuel cell to load change10.1016/0378-7753(95)02263-5 ↗
5. Analysis of active and reactive power control of a stand-alone PEM fuel cell power plant10.1109/TPWRS.2004.836191 ↗
6. Development of a stack simulation model for control study on direct reforming molten carbonate fuel cell power plant
7. An integrated SOFC plant dynamic model for power system simulation10.1016/S0378-7753(99)00430-9 ↗
8. Development of a stack simulation model for control study on direct reforming molten carbonate fuel cell power plant10.1109/60.815119 ↗
9. Parametric modeling of the performance of a 5kW proton-exchange membrane fuel cell stack10.1016/0378-7753(93)01835-6 ↗
10. Sandler · 1989
11. 1997
12. M.R. Beychok, February 27, 2006. http://www.air-dispersion.com/msource.html.
13. 1989
14. H.J. Clewell, A Simple Method for Estimating the Source Strength of Spills of Toxic Liquids, Energy Systems Laboratory, ESL-TR-83-03, 1983. Available at Air Force Weather Technical Library, Asheville, NC.
15. G. Ille, C. Springer, The Evaporation And Dispersion Of Hydrazine Propellants From Ground Spills, Civil and Environmental Engineering Development Office, CEEDO 712-78-30, 1978. Available at Air Force Weather Technical Library, Asheville, NC.
16. J.P. Kahler, R.C. Curry, R.A. Kandler, Calculating Toxic Corridors, Air Force Weather Service, AWS TR-80/003, 1980. Available at Air Force Weather Technical Library, Asheville, NC.
17. Moran · 2003
18. CRC Handbook of Chemistry and Physics, February 27, 2006. http://www.hbcpnetbase.com/.
19. 1985