journal article·2019-06

Power capability and cyclic aging of commercial, high power lithium ion battery cells with respect to different cell designs

Alexander Schmidt, Anna Smith, Helmut Ehrenberg

Publisher page

Abstract

Abstract Commercially available, high power lithium ion batteries with capacities of about 3 Ah, on basis of different cell designs and mainly pouch format (but also one round cell) are cycled under continuous high discharge currents, up to 45C, to test for actual power capability. Using a different batch of cells, in addition low rate cycling tests (1C discharge) are carried out and compared to the respective high power procedures. Impedance measurements are conducted for full cells in their fresh and aged state. In addition, all cells are disassembled in their fresh and end of life states to gain further understanding on correlation of cell design (e.g. cell chemistry, electrode thickness, composition of active coating) and aging mechanisms. Therefore, the cells and electrodes are examined optically and characterized by means of XRD and SEM. It is found that there is a wide spread in quality of commercially available cells in terms of power capability, performance and aging. Aging mechanisms are discussed for all tested cells, and also the effect of high power vs. low power cycling. Aspects like SEI growth, change in particle size, cracking and impedance rise are systematically investigated and discussed.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Advancements in Battery Materials · Advanced Battery Technologies Research · Advanced Battery Materials and Technologies

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (31)

Show source-provided references
1. Physical characterization of the charging process of a Li-ion battery and prediction of Li plating by electrochemical modelling10.1016/j.jpowsour.2013.06.130 ↗
2. Charging protocols for lithium-ion batteries and their impact on cycle life—an experimental study with different 18650 high-power cells10.1016/j.est.2016.02.005 ↗
3. Ageing mechanisms in lithium-ion batteries10.1016/j.jpowsour.2005.01.006 ↗
4. A review of the electrochemical performance of alloy anode for lithium-ion batteries10.1016/j.jpowsour.2010.07.020 ↗
5. Improvement of natural graphite as a lithium-ion battery anode material, from raw flake to carbon-coated sphere10.1039/b316702j ↗
6. Fair performance comparison of different carbon blacks in lithium - sulfur batteries with practical mass loading - simple design competes with complex cathode architecture10.1016/j.jpowsour.2015.07.070 ↗
7. Cho · 2015 · 95073
8. Aqueous processing of natural graphite particulates for lithium-ion battery anodes and their electrochemical performance10.1016/j.jpowsour.2005.01.022 ↗
9. Electrochemical properties of LiCoO2 electrodes with latex binders on high-voltage exposure10.1149/2.0151504jes ↗
10. LiFePO4 water-soluble binder electrode for Li-ion batteries10.1016/j.jpowsour.2006.09.067 ↗
11. Investigations on cellulose-based high voltage composite cathodes for lithium ion batteries10.1016/j.jpowsour.2011.04.030 ↗
12. Processing of water-based LiNi1/3Mn1/3Co1/3O2 pastes for manufacturing lithium ion battery cathodes10.1007/s12034-014-0733-7 ↗
13. Natural cellulose as binder for lithium battery electrodes10.1016/j.jpowsour.2011.09.102 ↗
14. The effect of binders on the rheological properties and the microstructure formation of lithium-ion battery anode slurries
15. Cooperation between active material, polymeric binder and conductive carbon additive in lithium ion battery cathode10.1021/jp208428w ↗
16. Calendar aging of lithium-ion batteries I. Impact of the graphite anode on capacity fade10.1149/2.0411609jes ↗
17. Post mortem analysis of fatigue mechanisms in LiNi0.8Co0.15Al0.05O2 - LiNi0.5Co0.2Mn0.3O2 - LiMn2O4/graphite lithium ion batteries10.1016/j.jpowsour.2016.07.010 ↗
18. Postmortem analysis of calendar-aged graphite/LiFePO4 cells10.1016/j.jpowsour.2013.01.147 ↗
19. Characterization of high-power lithium-ion batteries by electrochemical impedance spectroscopy. I. Experimental investigation10.1016/j.jpowsour.2010.12.102 ↗
20. Theory of the electrochemical impedance of anomalous diffusion10.1016/S0022-0728(00)00497-6 ↗
21. Impedance based time-domain modeling of lithium-ion batteries: Part I10.1016/j.jpowsour.2018.01.043 ↗
22. Understanding the impedance spectrum of 18650 LiFePO4-cells10.1016/j.jpowsour.2012.12.020 ↗
23. Separation of charge transfer and contact resistance in LiFePO4-cathodes by impedance modeling10.1149/2.030207jes ↗
24. Challenges considering the degradation of cell components in commercial lithium-ion cells: a review and evaluation of present systems
25. Electrochemical and in situ X-ray diffraction studies of lithium intercalation in LixCoO210.1149/1.2221184 ↗
26. Comparative study of LiCoO2, LiNi1/2Co1/2O2 and LiNiO2 for 4 Volt secondary lithium cells10.1016/0013-4686(93)80046-3 ↗
27. Changes of the balancing between anode and cathode due to fatigue in commercial lithium-ion cells10.1016/j.jpowsour.2016.03.049 ↗
28. Olivine LiFePO4: development and future10.1039/C0EE00176G ↗
29. A review of conduction phenomena in Li-ion batteries10.1016/j.jpowsour.2010.06.060 ↗
30. Order and disorder in NMC layered materials: a FAULTS simulation analysis10.1017/S0885715617000033 ↗
31. Characterization of electronic and ionic transport in Li1-xNi0.33Mn0.33Co0.33O2 (NMC333) and Li1-xNi0.50Mn0.20Co0.30O2 (NMC523) as a function of Li content10.1149/2.0131608jes ↗