Impact of flow recirculation and anode dimensions on performance of a large scale microbial fuel cell
Source abstract
Abstract
Abstract Many design and operational parameters that can impact power generation in microbial fuel cells (MFCs), such as flow over the electrodes, can only be effectively examined in larger-scale systems. A maximum power density of 0.101 ± 0.006 W m−2 (0.74 ± 0.05 W m−3) was obtained in an 85-L MFC with graphite fiber brushes (5.1 cm diameter, 61 cm long) and flat air cathode (0.62 m2 exposed area; anode-cathode spacing of 1.3 cm) in batch mode. Recirculating the anolyte diagonally through the chamber (entering the top right side of the reactor and exiting the bottom left side) further improved performance by 17% to 0.118 ± 0.006 W m−2, at a hydraulic retention time (HRT) of 22 min (3.9 L min−1), compared to static flow conditions. This power density was also higher than that obtained with parallel flow through the chamber (more evenly distributed using a manifold; 0.109 ± 0.009 W m−2). Reducing the diameter of the anode brushes from 5.1 cm to 2.5 cm did not improve the anode performance. These results demonstrate the importance of electrode spacing and hydraulic flow on large-scale MFC performance.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Microbial Fuel Cells and Bioremediation · Electrochemical sensors and biosensors · Supercapacitor Materials and Fabrication
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (42)
Show source-provided references
1. Assessment of microbial fuel cell configurations and power densities10.1021/acs.estlett.5b00180 ↗
2. Towards sustainable wastewater treatment by using microbial fuel cells-centered technologies10.1039/C3EE43106A ↗
3. Long-term performance of liter-scale microbial fuel cells treating primary effluent installed in a municipal wastewater treatment facility10.1021/es400631r ↗
4. Evaluation of porous carbon felt as an aerobic biocathode support in terms of hydrogen peroxide10.1016/j.jpowsour.2017.03.079 ↗
5. COD removal characteristics in air-cathode microbial fuel cells10.1016/j.biortech.2014.11.001 ↗
6. A two-stage microbial fuel cell and anaerobic fluidized bed membrane bioreactor (MFC-AFMBR) system for effective domestic wastewater treatment10.1021/es500737m ↗
7. Performance of a pilot scale microbial electrolysis cell fed on domestic wastewater at ambient temperatures for a 12month period10.1016/j.biortech.2014.09.083 ↗
8. Control of voltage reversal in serially stacked microbial fuel cells through manipulating current: significance of critical current density10.1016/j.jpowsour.2015.02.076 ↗
9. Evaluating a multi-panel air cathode through electrochemical and biotic tests10.1016/j.watres.2018.10.022 ↗
10. Long-term performance of a 200 liter modularized microbial fuel cell system treating municipal wastewater: treatment, energy, and cost10.1039/C6EW00020G ↗
11. Different electrode configurations to optimize performance of multi-electrode microbial fuel cells for generating power or treating domestic wastewater10.1016/j.jpowsour.2013.10.081 ↗
12. Temperature, inocula and substrate: contrasting electroactive consortia, diversity and performance in microbial fuel cells10.1016/j.bioelechem.2017.07.006 ↗
13. Microbial fuel cells with an integrated spacer and separate anode and cathode modules10.1039/C5EW00223K ↗
14. Scale-up of membrane-free single-chamber microbial fuel cells10.1016/j.jpowsour.2007.12.120 ↗
15. Impact of electrode configurations on retention time and domestic wastewater treatment efficiency using microbial fuel cells10.1016/j.watres.2015.05.021 ↗
16. The impact of new cathode materials relative to baseline performance of microbial fuel cells all with the same architecture and solution chemistry10.1039/C7EE00910K ↗
17. Assessment of a metal–organic framework catalyst in air cathode microbial fuel cells over time with different buffers and solutions10.1016/j.biortech.2017.02.105 ↗
18. Immobilization of a metal – nitrogen – carbon catalyst on activated carbon with enhanced cathode performance in microbial fuel cells10.1002/cssc.201600573 ↗
19. A 90-liter stackable baffled microbial fuel cell for brewery wastewater treatment based on energy self-sufficient mode10.1016/j.biortech.2015.06.026 ↗
20. Evaluation of multi-brush anode systems in microbial fuel cells10.1016/j.biortech.2013.08.154 ↗
21. Effects of carbon brush anode size and loading on microbial fuel cell performance in batch and continuous mode10.1016/j.jpowsour.2013.08.110 ↗
22. Addition of acetate improves stability of power generation using microbial fuel cells treating domestic wastewater10.1016/j.bioelechem.2017.08.002 ↗
23. Continuous electricity generation from domestic wastewater and organic substrates in a flat plate microbial fuel cell10.1021/es0491026 ↗
24. Simultaneous domestic wastewater treatment and renewable energy production using microbial fuel cells (MFCs)10.2166/wst.2011.401 ↗
25. Porous anodes with helical flow pathways in bioelectrochemical systems: the effects of fluid dynamics and operating regimes10.1016/j.jpowsour.2012.03.040 ↗
26. The effect of flow modes and electrode combinations on the performance of a multiple module microbial fuel cell installed at wastewater treatment plant10.1016/j.watres.2016.09.008 ↗
27. Effects of anolyte recirculation rates and catholytes on electricity generation in a litre-scale upflow microbial fuel cell10.1039/c001201g ↗
28. Use of novel permeable membrane and air cathodes in acetate microbial fuel cells10.1016/j.electacta.2009.11.086 ↗
29. Long-term performance of chemically and physically modified activated carbons in air cathodes of microbial fuel cells10.1002/celc.201402123 ↗
30. Performance of a pilot-scale continuous flow microbial electrolysis cell fed winery wastewater10.1007/s00253-011-3130-9 ↗
31. Treatment of carbon fiber brush anodes for improving power generation in air-cathode microbial fuel cells10.1016/j.jpowsour.2009.10.030 ↗
32. Using cathode spacers to minimize reactor size in air cathode microbial fuel cells10.1016/j.biortech.2012.01.121 ↗
33. Pressurized air cathodes for enhanced stability and power generation by microbial fuel cells10.1016/j.jpowsour.2016.09.112 ↗
34. Electrochemical analysis of separators used in single-chamber, air-cathode microbial fuel cells10.1016/j.electacta.2012.11.004 ↗
35. Mitigating external and internal cathode fouling using a polymer bonded separator in microbial fuel cells10.1016/j.biortech.2017.10.109 ↗
36. Microbial fuel cells: methodology and technology10.1021/es0605016 ↗
37. In situ biofilm removal from air cathodes in microbial fuel cells treating domestic wastewater10.1016/j.biortech.2018.06.008 ↗
38. Impact of ohmic resistance on measured electrode potentials and maximum power production in microbial fuel cells10.1021/acs.est.8b02055 ↗
39. Air humidity and water pressure effects on the performance of air-cathode microbial fuel cell cathodes10.1016/j.jpowsour.2013.08.084 ↗
40. Effects of hydraulic pressure on the performance of single chamber air-cathode microbial fuel cells10.1016/j.bios.2014.01.036 ↗
41. Enhancing power generation of scale-up microbial fuel cells by optimizing the leading-out terminal of anode10.1016/j.jpowsour.2013.10.014 ↗
42. Increasing power generation for scaling up single-chamber air cathode microbial fuel cells10.1016/j.biortech.2010.12.104 ↗