Change of self-discharge mechanism as a fast tool for estimating long-term stability of ionic liquid based supercapacitors
Source abstract
Abstract
A systematic study is presented on self-discharge (SD) characteristics and leakage current levels of supercapacitors based on various carbon materials in ionic liquids: 1-ethyl-3-methylimidazolium bis(trifluoromethanesulfonyl)imide (EMImTFSI) and 1-butyl-3-methylimidazolium tetrafluoroborate (BMImBF4). The higher SD rate occurring with partly mesoporous carbon xerogels, opposed to microporous activated carbon, suggests underlying faradaic induced processes rather than SD governed by charge redistribution. The passivation of some surface active sites of carbon xerogels by high-temperature di-hydrogen treatment resulted in reduced SD extent. The cell potential hold dependence of SD was studied for individual electrodes, showing changes of SD mechanism in EMImTFSI for both electrode polarities at cell potential higher than 2.8 V, against ∼3.4 V and >3.6 V for the negatively and positively charged electrodes in BMImBF4. A good correlation was established between the electrochemical stability limits determined by long-lasting floating tests and the limits suggested by changes in the SD mechanism and increase in measured leakage current. Hence, SD and leakage current analysis is a sensitive and much faster tool for determining the maximum cell potential applicable to supercapacitors than life time tests by floating, and should be more extensively applied in the future for such objective.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Supercapacitor Materials and Fabrication · Advanced Sensor and Energy Harvesting Materials · Conducting polymers and applications
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (31)
Show source-provided references
1. Béguin · 2013
2. Comparative studies of self-discharge by potential decay and floatcurrent measurements at C double-layer capacitor and battery electrodes10.1016/j.jpowsour.2004.03.068 ↗
3. Self-discharge of electrochemical double layer capacitors10.1039/c3cp44612c ↗
4. Effects of charge redistribution on self-discharge of electrochemical capacitors10.1016/j.electacta.2009.01.019 ↗
5. Prediction of the self-discharge profile of an electrochemical capacitor electrode in the presence of both activation-controlled discharge and charge redistribution10.1016/j.jpowsour.2009.08.040 ↗
6. Detailed analysis of the self-discharge of supercapacitors10.1016/j.jpowsour.2009.12.028 ↗
7. Diagnostic analyses for mechanisms of self-discharge of electrochemical capacitors and batteries10.1016/S0378-7753(97)02468-3 ↗
8. Self-discharge in electrochemical capacitors: a perspective article10.1149/2.0081505jes ↗
9. Pore shape affects spontaneous charge redistribution in small pores10.1021/jp103766q ↗
10. Charge redistribution and ionic mobility in the micropores of supercapacitors10.1016/j.jpowsour.2013.07.036 ↗
11. Understanding performance limitation and suppression of leakage current or self-discharge in electrochemical capacitors: a review10.1039/C5CP05459A ↗
12. Leakage currents and self-discharge of ionic liquid-based supercapacitors10.1007/s10800-013-0647-x ↗
13. A neat ionic liquid electrolyte based on FSI anion for electric double layer capacitor10.1016/j.jpowsour.2008.08.086 ↗
14. A reliable determination method of stability limits for electrochemical double layer capacitors10.1016/j.electacta.2013.04.057 ↗
15. Toward reliable values of electrochemical stability limits for electrolytes10.1149/1.1392609 ↗
16. A better quantification of electrochemical stability limits for electrolytes in double layer capacitors10.1016/S0013-4686(01)00358-9 ↗
17. RF xerogels with tailored porosity over the entire nanoscale10.1016/j.micromeso.2014.04.048 ↗
18. Graphene-doped carbon xerogel combining high electrical conductivity and surface area for optimized aqueous supercapacitors10.1016/j.carbon.2017.03.059 ↗
19. Relation between the ion size and pore size for an electric double-layer capacitor10.1021/ja7106178 ↗
20. Mesoporous carbon design for ionic liquid-based, double-layer supercapacitors10.1002/fuce.200900198 ↗
21. Role of carbon porosity and ion size in the development of ionic liquid based supercapacitors10.1149/1.3514694 ↗
22. Quenched solid density functional theory and pore size analysis of micro-mesoporous carbons10.1016/j.carbon.2009.01.050 ↗
23. Quenched solid density functional theory method for characterization of mesoporous carbons by nitrogen adsorption10.1016/j.carbon.2011.11.037 ↗
24. On the chemical nature of graphene edges: origin of stability and potential for magnetism in carbon materials10.1021/ja050124h ↗
25. Appropriate methods for evaluating the efficiency and capacitive behavior of different types of supercapacitors10.1016/j.elecom.2015.07.022 ↗
26. Technical information document „SkelCap User Manual“ under Downloads on www.skeletontech.com by Skeleton Technologies.
27. Cycle versus voltage hold – which is the better stability test for electrochemical double layer capacitors?10.1016/j.jpowsour.2012.10.019 ↗
28. Effect of Fe-contamination on rate of self-discharge in carbon-based aqueous electrochemical capacitors10.1016/j.jpowsour.2008.10.096 ↗
29. In situ FTIR study of the decomposition of N-butyl-N-methylpyrrolidinium bis(trifluoromethanesulfonyl)amide ionic liquid during cathodic polarization of lithium and graphite electrodes10.1016/j.electacta.2009.12.030 ↗
30. Electrochemistry at negative potentials in Bis(trifluoromethanesulfonyl)amide ionic liquids10.1524/zpch.2006.220.10.1483 ↗
31. Effect of water on the aging of activated carbon based electrochemical double layer capacitors during constant voltage load tests10.1016/S1452-3981(23)15049-8 ↗