Effects of electrolyte, loading rate and location of indentation on mechanical integrity of li-ion pouch cells
Source abstract
Abstract
Abstract The safety of lithium-ion batteries under mechanical abuse conditions is an essential feature where these cells are used in mobile applications such as electric vehicles. In recent publications, punch testing has been used as a benchmark to study the mechanical abuse tolerance of the cells. What has not been studied in depth is how various test conditions such as the loading rate or the location of indentation affect the response of the cell. This paper quantifies the effects of four important test variables on the results of mechanical indentation tests. The first factor studied was to what degree tests on dry dummy cells without electrolyte can predict the response of a production cell. Then the effects of loading location, center versus on the edge, was evaluated. The speed of the test, at quasi-static rates, was the third variable. The last test characteristic studied was the repeatability of punch loading experiments. After completing the test program, a finite element model was developed to simulate the response of all studied cases. The model showed good predictability of load-displacement response and the onset of short circuit under all loading scenarios studied in this research.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advanced Battery Technologies Research · Advancements in Battery Materials · Electronic Packaging and Soldering Technologies
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (24)
Show source-provided references
1. Crash safety of lithium-ion batteries towards development of a computational model
2. Calibration and finite element simulation of pouch lithium-ion batteries for mechanical integrity10.1016/j.jpowsour.2011.10.094 ↗
3. Modeling and short circuit detection of 18650 Li-ion cells under mechanical abuse conditions10.1016/j.jpowsour.2012.07.057 ↗
4. Characterizing and modeling mechanical properties and onset of short circuit for three types of lithium-ion pouch cells10.1016/j.jpowsour.2013.08.056 ↗
5. Damage of cells and battery packs due to ground impact10.1016/j.jpowsour.2014.05.078 ↗
6. Modelling of cracks developed in lithium-ion cells under mechanical loading10.1039/C5RA17865G ↗
7. Microscale failure mechanisms leading to internal short circuit in Li-ion batteries under complex loading scenarios10.1016/j.jpowsour.2016.04.005 ↗
8. Deformation and failure mechanisms of 18650 battery cells under axial compression10.1016/j.jpowsour.2016.10.064 ↗
9. Li-ion battery separators mechanical integrity and failure mechanisms leading to soft and hard internal shorts
10. Deformation and failure characteristics of four types of lithium-ion battery separators10.1016/j.jpowsour.2016.07.078 ↗
11. Degradation of battery separators under charge–discharge cycles10.1039/C7RA11585G ↗
12. Adhesion strength of the cathode in lithium-ion batteries under combined tension/shear loadings10.1039/C7RA12382E ↗
13. Review: characterization and modeling of the mechanical properties of lithium-ion batteries10.3390/en10111730 ↗
14. Mechanical behavior of representative volume elements of lithium-ion battery cells under compressive loading conditions10.1016/j.jpowsour.2013.06.134 ↗
15. Computational models for simulations of lithium-ion battery cells under constrained compression tests10.1016/j.jpowsour.2013.05.022 ↗
16. Mechanical behavior of representative volume elements of lithium-ion battery modules under various loading conditions10.1016/j.jpowsour.2013.09.128 ↗
17. Mechanical testing and macro-mechanical finite element simulation of the deformation, fracture, and short circuit initiation of cylindrical Lithium ion battery cells10.1016/j.jpowsour.2012.04.055 ↗
18. Structural analysis and experimental characterization of cylindrical lithium-ion battery cells subject to lateral impact10.1016/j.jpowsour.2014.08.014 ↗
19. Computational model of 18650 lithium-ion battery with coupled strain rate and SOC dependencies10.1016/j.apenergy.2016.03.108 ↗
20. State of charge dependent mechanical integrity behavior of 18650 lithium-ion batteries10.1038/srep21829 ↗
21. Dynamic impact tests on lithium-ion cells10.1016/j.ijimpeng.2017.04.025 ↗
22. Homogenized mechanical properties for the jellyroll of cylindrical Lithium-ion cells10.1016/j.jpowsour.2013.04.135 ↗
23. Mechanical behavior of a battery separator in electrolyte solutions10.1016/j.jpowsour.2011.06.026 ↗
24. Unveiling the environment-dependent mechanical properties of porous polypropylene separators10.1016/j.polymer.2014.09.067 ↗