Design of durability test protocol for vehicular fuel cell systems operated in power-follow mode based on statistical results of on-road data
Source abstract
Abstract
Abstract City buses using polymer electrolyte membrane (PEM) fuel cells are considered to be the most likely fuel cell vehicles to be commercialized in China. The technical specifications of the fuel cell systems (FCSs) these buses are equipped with will differ based on the powertrain configurations and vehicle control strategies, but can generally be classified into the power-follow and soft-run modes. Each mode imposes different levels of electrochemical stress on the fuel cells. Evaluating the aging behavior of fuel cell stacks under the conditions encountered in fuel cell buses requires new durability test protocols based on statistical results obtained during actual driving tests. In this study, we propose a systematic design method for fuel cell durability test protocols that correspond to the power-follow mode based on three parameters for different fuel cell load ranges. The powertrain configurations and control strategy are described herein, followed by a presentation of the statistical data for the duty cycles of FCSs in one city bus in the demonstration project. Assessment protocols are presented based on the statistical results using mathematical optimization methods, and are compared to existing protocols with respect to common factors, such as time at open circuit voltage and root-mean-square power.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Fuel Cells and Related Materials · Advanced Battery Technologies Research · Electric and Hybrid Vehicle Technologies
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (32)
Show source-provided references
1. A review of polymer electrolyte membrane fuel cell durability test protocols10.1016/j.jpowsour.2011.07.082 ↗
2. Borup · 2005 · 1039
3. Borup · 2008 · 08
4. Scientific aspects of polymer electrolyte fuel cell durability and degradation10.1021/cr050182l ↗
5. 2010
6. A comparison of fuel cell test protocols10.1149/1.3562478 ↗
7. A comparison of fuel cell testing protocols – a case study: protocols used by the U.S. Department of energy, european union, international electrotechnical commission/fuel cell testing and standardization network, and fuel cell technical Team10.1016/j.jpowsour.2013.06.026 ↗
8. 2010
9. 2010
10. StackTest, test module documents. http://stacktest.zsw-bw.de/media-centre/test-modules.html.
11. StackTest, test program documents. http://stacktest.zsw-bw.de/media-centre/test-programs.html.
12. Variability and comparability of testing procedures for PEMFC stacks and modules regarding performance aspects10.1016/j.ijhydene.2016.07.249 ↗
13. Accelerated life-time tests including different load cycling protocols for high temperature polymer electrolyte membrane fuel cells10.1016/j.electacta.2014.10.025 ↗
14. Methodology for the design of accelerated stress tests for non-precious metal catalysts in fuel cell cathodes10.1016/j.jpowsour.2016.10.032 ↗
15. Current status and trends of the research and development for fuel cell vehicles
16. Performance comparison of two fuel cell hybrid buses with different powertrain and energy management strategies10.1016/j.jpowsour.2006.09.033 ↗
17. Optimal vehicle control strategy of a fuel cell/battery hybrid city bus10.1016/j.ijhydene.2009.06.021 ↗
18. Adaptive supervisory control strategy of a fuel cell/battery-powered city bus10.1016/j.jpowsour.2009.04.074 ↗
19. Power management strategy for vehicular-applied hybrid fuel cell/battery power system10.1016/j.jpowsour.2009.01.092 ↗
20. Active fault tolerance control system of fuel cell hybrid city bus10.1016/j.ijhydene.2010.08.005 ↗
21. Real time optimal energy management strategy targeting at minimizing daily operation cost for a plug-in fuel cell city bus10.1016/j.ijhydene.2012.07.074 ↗
22. Closed loop control algorithm of fuel cell output power for a city bus10.4271/2013-01-0479 ↗
23. Application of Pontryagin's Minimal Principle to the energy management strategy of plugin fuel cell electric vehicles10.1016/j.ijhydene.2013.05.125 ↗
24. Multi-mode control strategy for fuel cell electric vehicles regarding fuel economy and durability10.1016/j.ijhydene.2013.11.133 ↗
25. Energy flow modeling and real-time control design basing on mean values for maximizing driving mileage of a fuel cell bus10.1016/j.ijhydene.2015.08.104 ↗
26. Optimal sizing of plug-in fuel cell electric vehicles using models of vehicle performance and system cost10.1016/j.apenergy.2012.10.010 ↗
27. Multi-objective component sizing based on optimal energy management strategy of fuel cell electric vehicles10.1016/j.apenergy.2015.02.017 ↗
28. Comparison study on life-cycle costs of different trams powered by fuel cell systems and others10.1016/j.ijhydene.2016.03.032 ↗
29. Multi-objective energy management optimization and parameter sizing for proton exchange membrane hybrid fuel cell vehicles10.1016/j.enconman.2016.09.082 ↗
30. Fuel cell system degradation analysis of a Chinese plug-in hybrid fuel cell city bus10.1016/j.ijhydene.2016.06.136 ↗
31. Test Program D-01: Durability. StackTest, test program documents. http://stacktest.zsw-bw.de/media-centre/test-programs.html.
32. Solve Constrained Linear Least Squares Problems. https://de.mathworks.com/help/optim/ug/lsqlin.html.